WORKPLACE SAFETY · WORKING AT HEIGHT
Verify the harness is attached, not just worn.
Check people on platforms, scaffolds and ladders, their safety harness and whether the hook is attached, all from camera feeds. When something is missing, AXION alerts the worker; if it continues, the safety officer is notified.
Trusted by the world’s leading companies.
THE NEED ON THE FLOOR
Don’t leave safety at height to spot checks.
Falls from height are the accident type with the most severe outcomes. Wearing a harness is not enough; the hook has to be attached too. Yet site checks are momentary and infrequent. TIM INSPECT assesses people in the working-at-height areas you define, and their harness status, from camera feeds.
- 01
Define working-at-height areas
Mark areas such as platforms, scaffolds and ladders in the camera view. The check applies to people who are in those areas.
- 02
Tell the worker what is missing
If the hook is not attached, the worker’s AXION vibrates and alerts them. If it continues, the safety officer is notified.
- 03
Follow each event on record
Every event is recorded and matched with the permit in the work permit system. Review violation records by area.
EXPLORE THE SITUATION
What happens when something is missing at height?
Choose a situation to see what the camera sees, who receives the alert and how the event is recorded.

Area · Facade scaffold
- People1
- HarnessNone
A worker is seated on scaffold tubes while working; no safety harness is detected in the image.
The worker’s AXION vibrates and alerts them. The worker puts on the harness, attaches the hook to the anchor point and then carries on.
An event record is opened. The alert stays open until harness and hook are verified.
Work permitOKSafety harnessNot detectedHook attachmentChecking

Voice alert: “No safety harness. Put it on and attach the hook.”
HOW IT WORKS
Define the area, then see harness and hook.
Area · Floor slab
- TypeWork at height
- Safety harnessRequired
- HookMust be attached
- Edge zoneDefined

Detected
- People1
- HarnessNone
- HookNot seen



Violation record
- AreaFloor slab
- EventEdge zone
- Duration00:40
- Work permitMatched
- Event imageStored
Define the working-at-height area
Areas such as platforms, scaffolds, ladders and slab edges are defined in the camera view.
SYSTEM, RECORD AND INTEGRATION
Follow the alert and the permit in one record.
The area definition, the camera’s detection and the alert to the worker come together in one workflow. The event record is matched with the permit in the work permit system, and violation records are kept by area.

View of the area
Feeds from cameras covering platforms, scaffolds and slab edges.
- SourceFixed cameras
- CoverageDefined working-at-height areas
- Components
- Fixed cameras
- TIM INSPECT software
- AXION
- Work permit system integration
Attached, not just worn
Check the hook attachment as well as the harness.
Worker first, then officer
The alert goes to the worker first; if it continues, to the officer.
Status, not identity
Zone and behaviour are observed; only the event moment is stored.
Review in one record where an alert was opened, how long it lasted and how it closed. Look at violation records together with work permits and move from momentary spot checks to continuous monitoring.
SOLUTION FILM
Cameras check harness and hook. AXION alerts the worker.

TIM INSPECT · EXPLORE SOLUTIONS
One platform. 35 applications.
Discover the next opportunity on your floor. Choose a solution area or industry and explore each application visually.
Workplace safetyForklift–Pedestrian Safety
Analyze risky encounters from camera feeds and alert the people involved through AXION.
Manufacturing · Logistics & warehousing
Workplace safetyRestricted-Zone Detection
Detect entry into hazardous areas and alert the worker and responsible team.
Manufacturing · Construction
Workplace safetyPPE Detection
Check the use of helmets, vests and other protective equipment in working areas.
Manufacturing · Construction · Logistics & warehousing
Workplace safetyFire & Smoke Early Warning
Evaluate visible flame and smoke signs in camera feeds and notify the relevant team.
Manufacturing · Logistics & warehousing · Energy & facilities
Workplace safetySpill & Leak Detection
Detect unexpected liquid accumulation and leaks, and notify teams with location information.
Manufacturing · Food & beverage · Energy & facilities
Workplace safetyFallen or Motionless Person Detection
Detect falls or prolonged inactivity to support the assistance workflow.
Manufacturing · Logistics & warehousing · Energy & facilities
Workplace safetyErgonomics & Posture Analysis
Analyze lifting, bending and reaching movements to make risky postures visible.
Manufacturing · Logistics & warehousing
Workplace safetyLockout/Tagout Verification
Verify isolation steps with photographs to manage checks before maintenance.
Manufacturing · Energy & facilities
Workplace safetyEmergency Exit & Route Monitoring
Detect obstructions blocking emergency exits and access routes through camera feeds.
Manufacturing · Logistics & warehousing · Retail & e-commerce
Workplace safetyLoading Dock Safety
Check truck position, wheel chocks and dock conditions to flag risky loading situations.
Logistics & warehousing · Manufacturing
Verification & qualityShipment & Crate Verification
Count passing crates, read their labels and match the load against the shipment list.
Automotive · Logistics & warehousing
Verification & qualityReturned Product Inspection
Identify returned products and record visual checks of damage, dates and product information.
Food & beverage · Retail & e-commerce · Logistics & warehousing
Verification & qualityVoice-Guided Final Inspection
Complete hands-free inspection steps and document findings with voice and photographs.
Automotive · Manufacturing
Verification & qualityAssembly Part Verification
Check parts, labels and surfaces during assembly and send the result to production systems.
Automotive · Manufacturing
Verification & qualityCargo Sortation & Pallet Verification
Verify outgoing cargo by checking shipping labels and pallet contents together.
Logistics & warehousing · Aviation
Verification & qualityMetal Part & Label Verification
Match stamped metal-part numbers with crate labels to verify product identity.
Automotive · Manufacturing
Verification & qualityQuick-Connect Verification
Visually check that assembly quick-connects are fully seated and record the result.
Automotive · Manufacturing
Verification & qualityVehicle Label Verification
Read vehicle-specific labels with OCR and compare them with expected production data.
Automotive · Manufacturing
Verification & qualityComponent Assembly Inspection
Visually verify the assembly of components such as retaining rings, washers and plugs.
Automotive · Manufacturing
Verification & qualityProduct & Carton Verification
Combine product, plug, label and carton-content checks before shipment.
Automotive · Manufacturing · Logistics & warehousing
Operational efficiencyAssembly Sequence Verification
Monitor the defined assembly sequence and flag missed or out-of-order steps.
Automotive · Manufacturing
Operational efficiencyCycle Time & Microstops
Measure station cycles and brief stops from video to reveal deviations in workflow.
Automotive · Manufacturing
Operational efficiencyMachine Utilization
Assess running and waiting periods visually and notify the relevant team of stops.
Manufacturing · Automotive
Operational efficiencyDock & Door Monitoring
Track vehicle arrivals, door use and loading progress in one workflow.
Logistics & warehousing · Manufacturing
Operational efficiencyFour-Side Pallet Scanning
Read labels across pallet faces during a pass and match them against the order list.
Logistics & warehousing · Retail & e-commerce · Food & beverage
Operational efficiencyDimensioning
Check carton and pallet dimensions with vision and laser measurement and create a record.
Logistics & warehousing · Retail & e-commerce
Operational efficiencyDamage Detection
Document carton, pallet and container damage with photographs at entry and exit points.
Logistics & warehousing · Retail & e-commerce · Manufacturing
Operational efficiencyInventory Counting
Read shelf and pallet labels to reveal empty locations and placement mismatches.
Logistics & warehousing · Retail & e-commerce · Manufacturing
Operational efficiencyLicense Plate & Container OCR
Read vehicle and container numbers and match them with appointment and shipment records.
Logistics & warehousing · Manufacturing
Operational efficiencyConveyor Jam Detection
Detect conveyor build-ups and jams and notify the person who can respond.
Logistics & warehousing · Manufacturing · Food & beverage
Facility monitoringGauge & Meter Reading
Read analog gauges from images, record values and notify teams of threshold exceptions.
Manufacturing · Energy & facilities
Facility monitoringMaintenance Rounds
Follow inspection points step by step and document findings with photographs and voice.
Manufacturing · Energy & facilities
Facility monitoringUnauthorized Entry
Monitor designated-area entry and tailgating and notify the security team.
Manufacturing · Logistics & warehousing · Retail & e-commerce
Facility monitoringEnvironmental Monitoring
Monitor visible emissions, dust and waste-sorting conditions through camera feeds.
Manufacturing · Energy & facilitiesFAQ
Questions, answered
Working-at-Height Safety is a workplace safety solution on Thread In Motion’s TIM INSPECT platform that checks harness, hook attachment and edge approach at height from fixed camera feeds. If something is missing, the worker’s AXION alerts them, and the safety officer is notified if it continues.
With TIM INSPECT, Working-at-Height Safety works in four steps: 1) Define the working-at-height area: Areas such as platforms, scaffolds, ladders and slab edges are defined in the camera view. 2) Detect the person and harness: Cameras assess the person in the area, the safety harness and whether the hook is attached. Status is observed, not identity. 3) Alert the worker: The worker’s AXION vibrates and alerts them. If the issue is not fixed, the safety officer is notified. 4) Record the event: The event is recorded with its area and duration, and matched with the permit in the work permit system.
Components used: fixed cameras, TIM INSPECT software, AXION and work permit system integration. The area definition, the camera’s detection and the alert to the worker come together in one workflow. The event record is matched with the permit in the work permit system, and violation records are kept by area.
Small details such as a hook are hard to see from a distant camera. Camera placement is therefore tested on site; viewing angle and distance are chosen so that harness and hook can be told apart. The scope is settled through these tests before the pilot.
No. The system observes the zone a person is in and what they do, not who they are. Images are filtered and only the event moment is kept. The setup is designed around KVKK and GDPR requirements from the outset.
People on platforms, scaffolds or ladders; whether the safety harness and hook are attached; approaching an edge without a guardrail; and incorrect ladder use are all within the scope of this scenario.
The worker’s AXION vibrates and alerts them first. If the issue is not fixed, the safety officer is notified. The system does not stop work by itself; it alerts and records the event.
Event records can be matched with permits in the work permit system. The integration scope is planned around the permit system used on site.

YOUR SITE
Let’s review your working-at-height areas together.
Let’s test your areas, camera placement and the distances at which a hook can be seen on site, then settle the pilot scope and the results to measure before the pilot starts.
























