Get a demo
A worker places a bellows-type part into a carton that already holds six parts

AUTOMOTIVE · PRODUCT AND CARTON VERIFICATION

Verify product and carton at a single station.

Check the plugs and label of each tested product with VEGA-X and measure its height by laser. Verify carton contents with continuous video while it is being filled, and print the shipping label once every check is complete.

Discuss the verification solution
Move the lens to see what the camera sees

Trusted by the world’s leading companies.

Sürat KargoÇimsa
Brisa
Togg
Eti
Arçelik
Yusen Logistics
CEVA Logistics
Aramex
Kühne + Nagel
CarrefourMercedes-Benz
Coca-Cola
Toyota
Renault
Honda
Ford
Stellantis
BSH
Daikin
DiageoLactalis
MANN+HUMMEL
Viessmann
Sika

Results from an automotive supplier deployment

99%
Height measurement accuracy
50%
Faster
100%
Customer satisfaction

Results relate to this deployment and are based on the Thread In Motion project report.

THE NEED ON THE FLOOR

Don’t leave the check to the worker’s attention.

Products leaving the leak test are packed into the customer’s carton and shipped. Three errors can occur at this stage: a product of the wrong height, the wrong product, or a carton with a part missing. Checks were done by eye, and the label and other points were checked again at the next station. In this deployment four checks finish at one station and every carton leaves a record.

  • 01

    Bring three technologies to one station

    The VEGA-X glove checks plugs and label, a smart laser measures product height, and a fixed camera verifies carton contents. Which customer the product belongs to comes from MES.

  • 02

    Verify the carton with video, not a photo

    A single photo cannot see a product that is taken back out afterwards. The carton is watched for as long as it is being filled: how many parts went in, whether plugs are present, layer pads, removals.

  • 03

    Alert the worker right away

    Whatever the step, an error makes the glove vibrate and is reported to the system. The shipping label is printed once all checks are complete.

EXPLORE THE SITUATION

What happens when a check fails at the station?

Choose a situation to see which technology catches what, how the worker is alerted and how the carton becomes ready to ship.

The label on the product body; the code read does not match the expected one
BA21784
Label · different product code
Label check · MES
  • ExpectedBA21748
  • ReadBA21784
VEGA-X · label check
SituationLabel mismatch

The code on the label of the product on the table does not match the customer and product information from MES.

Response on the floor

VEGA-X looks at the label and sees the difference; the glove vibrates. The worker sets the product aside and brings the correct one to the table.

System decision

The risk of a wrong product or wrong customer is caught before it enters the carton. The error is reported to the system at the same time.

Station checks
PlugsOK
LabelNot OK
HeightPending
Carton contentsPending
4Checks
1Passed
1Open
Worker alert
VEGA-X · On the worker’s hand · VEGA-X
!Wrong label
On the worker’s hand · VEGA-X

The glove vibrates; the VEGA-X screen shows “Label mismatch”.

Packing on hold · label mismatch

HOW IT WORKS

Check. Measure. Watch the carton without a break.

The yellow plug and two black plugs on the top plate of the product
Plug ✓
Plug ✓
VEGA-X check
  • ProductBA21748
  • Plugs3 / 3
  • LabelCorrect
VEGA-X check
The height of the product on the table is measured by two laser sensors
Laser
Laser
Height measurement
  • Expected212 ± 1 mm
  • Measured212.3 mm
Laser measurement
The carton watched from above; each part inside is marked
Carton KL3052
  • Parts12 / 12
  • Plugs12 / 12
  • Layer1 / 2
Continuous video analysis
VEGA-X
!Part removed
Carton KL3052
  • Part count6 / 12
  • SystemNotified
  • Shipping labelWaiting
Alert and label
01 / 04

Check plugs and label

Which customer the product belongs to comes from MES. The worker looks at the product with VEGA-X: are the plugs in place, is the label correct?

SYSTEM, RECORD AND INTEGRATION

From MES data to shipping label, one workflow.

Expected values come from MES; glove, laser and camera work in the same system. A video record and event history are kept for every carton: which part went in when, which was taken back out, and in what state the carton was closed. The repeat check at the next station is no longer needed.

Inspection table, laser sensors and the fixed camera above the carton
01 / 04

Image and measurement

VEGA-X, the laser and the fixed camera above the carton collect data at the same station.

  • On the productVEGA-X · smart laser
  • In the cartonFixed camera · continuous video
    Components
  • VEGA-X
  • Smart laser system
  • Fixed camera
  • TIM INSPECT software
  • MES integration
  • Checks that finish at one station

    The label check and other checks at the next station are no longer needed.

  • Verification that cannot be bypassed

    The carton is verified over the whole time it is filled, not at one moment.

  • Evidence for every carton

    A video record and event history are kept for each carton.

In a carton’s record, see when parts went in, which one was taken back out and in what state the carton was closed. A carton that leaves the area before the part count or plug check is complete is flagged as not OK, so height, product and quantity errors are caught before they reach the customer.

APPLICATION FILM

Glove, laser and camera work together at one station.

English narration · horizontal 16:9

TIM INSPECT · EXPLORE SOLUTIONS

One platform. 35 applications.

Discover the next opportunity on your floor. Choose a solution area or industry and explore each application visually.

35 solutions
Verification & quality

Shipment & Crate Verification

Count passing crates, read their labels and match the load against the shipment list.

Automotive · Logistics & warehousing
Verification & quality

Returned Product Inspection

Identify returned products and record visual checks of damage, dates and product information.

Food & beverage · Retail & e-commerce · Logistics & warehousing
Verification & quality

Voice-Guided Final Inspection

Complete hands-free inspection steps and document findings with voice and photographs.

Automotive · Manufacturing
Verification & quality

Assembly Part Verification

Check parts, labels and surfaces during assembly and send the result to production systems.

Automotive · Manufacturing
Verification & quality

Cargo Sortation & Pallet Verification

Verify outgoing cargo by checking shipping labels and pallet contents together.

Logistics & warehousing · Aviation
Verification & quality

Metal Part & Label Verification

Match stamped metal-part numbers with crate labels to verify product identity.

Automotive · Manufacturing
Verification & quality

Quick-Connect Verification

Visually check that assembly quick-connects are fully seated and record the result.

Automotive · Manufacturing
Verification & quality

Vehicle Label Verification

Read vehicle-specific labels with OCR and compare them with expected production data.

Automotive · Manufacturing
Verification & quality

Component Assembly Inspection

Visually verify the assembly of components such as retaining rings, washers and plugs.

Automotive · Manufacturing
Workplace safety

Forklift–Pedestrian Safety

Analyze risky encounters from camera feeds and alert the people involved through AXION.

Manufacturing · Logistics & warehousing
Workplace safety

Restricted-Zone Detection

Detect entry into hazardous areas and alert the worker and responsible team.

Manufacturing · Construction
Workplace safety

PPE Detection

Check the use of helmets, vests and other protective equipment in working areas.

Manufacturing · Construction · Logistics & warehousing
Workplace safety

Fire & Smoke Early Warning

Evaluate visible flame and smoke signs in camera feeds and notify the relevant team.

Manufacturing · Logistics & warehousing · Energy & facilities
Workplace safety

Spill & Leak Detection

Detect unexpected liquid accumulation and leaks, and notify teams with location information.

Manufacturing · Food & beverage · Energy & facilities
Workplace safety

Fallen or Motionless Person Detection

Detect falls or prolonged inactivity to support the assistance workflow.

Manufacturing · Logistics & warehousing · Energy & facilities
Workplace safety

Ergonomics & Posture Analysis

Analyze lifting, bending and reaching movements to make risky postures visible.

Manufacturing · Logistics & warehousing
Workplace safety

Working-at-Height Safety

Use visual checks to assess harness attachment, scaffolding and ladder use.

Construction · Energy & facilities · Manufacturing
Workplace safety

Lockout/Tagout Verification

Verify isolation steps with photographs to manage checks before maintenance.

Manufacturing · Energy & facilities
Workplace safety

Emergency Exit & Route Monitoring

Detect obstructions blocking emergency exits and access routes through camera feeds.

Manufacturing · Logistics & warehousing · Retail & e-commerce
Workplace safety

Loading Dock Safety

Check truck position, wheel chocks and dock conditions to flag risky loading situations.

Logistics & warehousing · Manufacturing
Operational efficiency

Assembly Sequence Verification

Monitor the defined assembly sequence and flag missed or out-of-order steps.

Automotive · Manufacturing
Operational efficiency

Cycle Time & Microstops

Measure station cycles and brief stops from video to reveal deviations in workflow.

Automotive · Manufacturing
Operational efficiency

Machine Utilization

Assess running and waiting periods visually and notify the relevant team of stops.

Manufacturing · Automotive
Operational efficiency

Dock & Door Monitoring

Track vehicle arrivals, door use and loading progress in one workflow.

Logistics & warehousing · Manufacturing
Operational efficiency

Four-Side Pallet Scanning

Read labels across pallet faces during a pass and match them against the order list.

Logistics & warehousing · Retail & e-commerce · Food & beverage
Operational efficiency

Dimensioning

Check carton and pallet dimensions with vision and laser measurement and create a record.

Logistics & warehousing · Retail & e-commerce
Operational efficiency

Damage Detection

Document carton, pallet and container damage with photographs at entry and exit points.

Logistics & warehousing · Retail & e-commerce · Manufacturing
Operational efficiency

Inventory Counting

Read shelf and pallet labels to reveal empty locations and placement mismatches.

Logistics & warehousing · Retail & e-commerce · Manufacturing
Operational efficiency

License Plate & Container OCR

Read vehicle and container numbers and match them with appointment and shipment records.

Logistics & warehousing · Manufacturing
Operational efficiency

Conveyor Jam Detection

Detect conveyor build-ups and jams and notify the person who can respond.

Logistics & warehousing · Manufacturing · Food & beverage
Facility monitoring

Gauge & Meter Reading

Read analog gauges from images, record values and notify teams of threshold exceptions.

Manufacturing · Energy & facilities
Facility monitoring

Maintenance Rounds

Follow inspection points step by step and document findings with photographs and voice.

Manufacturing · Energy & facilities
Facility monitoring

Unauthorized Entry

Monitor designated-area entry and tailgating and notify the security team.

Manufacturing · Logistics & warehousing · Retail & e-commerce
Facility monitoring

Environmental Monitoring

Monitor visible emissions, dust and waste-sorting conditions through camera feeds.

Manufacturing · Energy & facilities

FAQ

Questions, answered

Product & Carton Verification is a quality control solution on Thread In Motion’s TIM INSPECT platform that combines VEGA-X plug and label checks, laser height measurement and continuous video of carton contents at one station. Errors make the glove vibrate; the shipping label prints once all checks pass.

With TIM INSPECT, Product & Carton Verification works in four steps: 1) Check plugs and label: Which customer the product belongs to comes from MES. The worker looks at the product with VEGA-X: are the plugs in place, is the label correct? 2) Measure height by laser: The smart laser system on the table measures the height of the product. A product of the wrong height is set aside before packing. 3) Watch the carton as it fills: The camera watches the carton from above without a break: how many parts went in, whether plugs are present, layer pads, and any part taken back out. 4) Alert, label, confirm: On any error the glove vibrates and the system is notified. When the checks are complete the shipping label is printed and the worker finishes with a barcode scan.

Components used: VEGA-X, smart laser system, fixed camera, TIM INSPECT software and MES integration. Expected values come from MES; glove, laser and camera work in the same system. A video record and event history are kept for every carton: which part went in when, which was taken back out, and in what state the carton was closed. The repeat check at the next station is no longer needed.

With a single photo, a product can be placed in the carton, photographed and then taken back out; the photo says “correct” and the carton ships incomplete. That is why the carton is watched without a break while it is filled, and the video is recorded. The system knows everything that happened, not one moment.

Plugs and label are checked with VEGA-X, and height is measured by the smart laser. The number of parts placed, their plugs, the layer pads in between and any part taken back out are followed by continuous video analysis from the fixed camera. In the last step the shipping label is confirmed with a barcode scan and vision.

The worker is alerted and the glove vibrates. This applies both to the plug and label checks done by hand and to the video analysis while the carton is filled. The error is reported to the system at the same time.

Which customer the product belongs to and the expected values come from the customer’s MES. The checks follow that information, and once all of them are complete the customer’s ready-to-ship label is printed.

YOUR SITE

Let’s bring your pre-shipment checks to a single station.

Let’s review your product, carton layout and MES connection together, and decide which check runs on the glove, the laser or the camera before setting the pilot scope.

Request a solution discussioninfo@threadinmotion.com
Chat on WhatsApp WhatsApp'tan yazın