OPERATIONAL EFFICIENCY · DIMENSIONING
Record the dimensions of every load, with a photo.
Measure the width, length and height of cartons and pallets with camera and laser as they pass. When a measurement does not match the declared value or a pallet overhangs, alert the operator through AXION and record the dimensions with a photo.
Trusted by the world’s leading companies.
THE NEED ON THE FLOOR
Base dimensions on a record, not an estimate.
When freight is billed by volume, a wrong measurement means lost revenue or a dispute. Manual measuring is slow and inconsistent, and overhanging pallets do not fit racks or vehicles. TIM INSPECT measures the load as it passes and compares it with the declared dimensions.
- 01
Measure the load as it passes
The width, length and height of cartons and pallets are taken by camera and laser at the measuring point. Pallet overhang and leaning or unstable stacks are assessed as well.
- 02
Tell the operator about the difference
When a measurement does not match the declared value or a pallet overhangs, the operator’s AXION alerts and shows the measured value.
- 03
Keep the dimensions with evidence
Every measurement is recorded with its photo. The record goes to the transport and billing system, and the photo is kept as proof of dimensions.
EXPLORE THE SITUATION
What happens when dimensions do not match the declaration?
Choose a situation to see what is measured, how the operator is alerted and how the dimension record is created.

Dimension comparison
- Declared60 × 40 × 40 cm
- Measured60 × 40 × 46 cm
- DifferenceHeight +6 cm
The height of a carton passing the measuring point is greater than the declared value.
Camera and laser take the measurement and the system compares it with the declaration. The operator’s AXION alerts and shows the measured value.
The difference becomes visible at the measuring point. Volume-based billing uses the recorded dimensions.
WidthRecordedLengthRecordedHeightDiffers from declared

Screen: “Height 46 cm · declared 40 cm.”
HOW IT WORKS
Measure in transit. Alert on a difference.
Measuring point · Line 2
- LoadPassing
- Declared60 × 40 × 40 cm

Measurement
- Width60 cm
- Length40 cm
- Height46 cm


Dimension record
- Size120 × 80 × 132 cm
- PhotoAttached
- SystemSent
Move the load past the measuring point
The carton or pallet passes the measuring point, and its dimensions are taken as it passes.
SYSTEM, RECORD AND INTEGRATION
One dimension record, from measurement to invoice.
The measured value, the declaration and the photo come together in one record. The record goes to your transport and billing system, and the photo is kept as proof of dimensions. High-speed lines may need dedicated hardware, which is assessed together during setup.

Measuring point
Dimensions are taken by camera and laser as the load passes.
- SourceFixed camera and laser
- TimingIn transit
- Components
- Fixed camera and laser
- TIM INSPECT software
- AXION
- Transport and billing link
Measurement on three axes
Measure width, length and height as the load passes.
Overhang and stack checks
Notice pallet overhang and leaning or unstable stacks.
Photo proof of dimensions
Record every measurement together with its photo.
Review the measured value, the declaration and the photo of every load in one record. When a difference comes up, the image shows what was measured, and the record becomes the shared reference for transport and billing.
SOLUTION FILM
Camera and laser measure. AXION shows the operator the difference.

TIM INSPECT · EXPLORE SOLUTIONS
One platform. 35 applications.
Discover the next opportunity on your floor. Choose a solution area or industry and explore each application visually.
Operational efficiencyAssembly Sequence Verification
Monitor the defined assembly sequence and flag missed or out-of-order steps.
Automotive · Manufacturing
Operational efficiencyCycle Time & Microstops
Measure station cycles and brief stops from video to reveal deviations in workflow.
Automotive · Manufacturing
Operational efficiencyMachine Utilization
Assess running and waiting periods visually and notify the relevant team of stops.
Manufacturing · Automotive
Operational efficiencyDock & Door Monitoring
Track vehicle arrivals, door use and loading progress in one workflow.
Logistics & warehousing · Manufacturing
Operational efficiencyFour-Side Pallet Scanning
Read labels across pallet faces during a pass and match them against the order list.
Logistics & warehousing · Retail & e-commerce · Food & beverage
Operational efficiencyDamage Detection
Document carton, pallet and container damage with photographs at entry and exit points.
Logistics & warehousing · Retail & e-commerce · Manufacturing
Operational efficiencyInventory Counting
Read shelf and pallet labels to reveal empty locations and placement mismatches.
Logistics & warehousing · Retail & e-commerce · Manufacturing
Operational efficiencyLicense Plate & Container OCR
Read vehicle and container numbers and match them with appointment and shipment records.
Logistics & warehousing · Manufacturing
Operational efficiencyConveyor Jam Detection
Detect conveyor build-ups and jams and notify the person who can respond.
Logistics & warehousing · Manufacturing · Food & beverage
Verification & qualityShipment & Crate Verification
Count passing crates, read their labels and match the load against the shipment list.
Automotive · Logistics & warehousing
Verification & qualityReturned Product Inspection
Identify returned products and record visual checks of damage, dates and product information.
Food & beverage · Retail & e-commerce · Logistics & warehousing
Verification & qualityVoice-Guided Final Inspection
Complete hands-free inspection steps and document findings with voice and photographs.
Automotive · Manufacturing
Verification & qualityAssembly Part Verification
Check parts, labels and surfaces during assembly and send the result to production systems.
Automotive · Manufacturing
Verification & qualityCargo Sortation & Pallet Verification
Verify outgoing cargo by checking shipping labels and pallet contents together.
Logistics & warehousing · Aviation
Verification & qualityMetal Part & Label Verification
Match stamped metal-part numbers with crate labels to verify product identity.
Automotive · Manufacturing
Verification & qualityQuick-Connect Verification
Visually check that assembly quick-connects are fully seated and record the result.
Automotive · Manufacturing
Verification & qualityVehicle Label Verification
Read vehicle-specific labels with OCR and compare them with expected production data.
Automotive · Manufacturing
Verification & qualityComponent Assembly Inspection
Visually verify the assembly of components such as retaining rings, washers and plugs.
Automotive · Manufacturing
Verification & qualityProduct & Carton Verification
Combine product, plug, label and carton-content checks before shipment.
Automotive · Manufacturing · Logistics & warehousing
Workplace safetyForklift–Pedestrian Safety
Analyze risky encounters from camera feeds and alert the people involved through AXION.
Manufacturing · Logistics & warehousing
Workplace safetyRestricted-Zone Detection
Detect entry into hazardous areas and alert the worker and responsible team.
Manufacturing · Construction
Workplace safetyPPE Detection
Check the use of helmets, vests and other protective equipment in working areas.
Manufacturing · Construction · Logistics & warehousing
Workplace safetyFire & Smoke Early Warning
Evaluate visible flame and smoke signs in camera feeds and notify the relevant team.
Manufacturing · Logistics & warehousing · Energy & facilities
Workplace safetySpill & Leak Detection
Detect unexpected liquid accumulation and leaks, and notify teams with location information.
Manufacturing · Food & beverage · Energy & facilities
Workplace safetyFallen or Motionless Person Detection
Detect falls or prolonged inactivity to support the assistance workflow.
Manufacturing · Logistics & warehousing · Energy & facilities
Workplace safetyErgonomics & Posture Analysis
Analyze lifting, bending and reaching movements to make risky postures visible.
Manufacturing · Logistics & warehousing
Workplace safetyWorking-at-Height Safety
Use visual checks to assess harness attachment, scaffolding and ladder use.
Construction · Energy & facilities · Manufacturing
Workplace safetyLockout/Tagout Verification
Verify isolation steps with photographs to manage checks before maintenance.
Manufacturing · Energy & facilities
Workplace safetyEmergency Exit & Route Monitoring
Detect obstructions blocking emergency exits and access routes through camera feeds.
Manufacturing · Logistics & warehousing · Retail & e-commerce
Workplace safetyLoading Dock Safety
Check truck position, wheel chocks and dock conditions to flag risky loading situations.
Logistics & warehousing · Manufacturing
Facility monitoringGauge & Meter Reading
Read analog gauges from images, record values and notify teams of threshold exceptions.
Manufacturing · Energy & facilities
Facility monitoringMaintenance Rounds
Follow inspection points step by step and document findings with photographs and voice.
Manufacturing · Energy & facilities
Facility monitoringUnauthorized Entry
Monitor designated-area entry and tailgating and notify the security team.
Manufacturing · Logistics & warehousing · Retail & e-commerce
Facility monitoringEnvironmental Monitoring
Monitor visible emissions, dust and waste-sorting conditions through camera feeds.
Manufacturing · Energy & facilitiesFAQ
Questions, answered
Dimensioning is an operational efficiency solution on Thread In Motion’s TIM INSPECT platform that measures carton and pallet dimensions in transit with camera and laser, comparing them with the declared values. On a mismatch or overhang, the operator is alerted through AXION; each measurement is recorded with a photo.
With TIM INSPECT, Dimensioning works in four steps: 1) Move the load past the measuring point: The carton or pallet passes the measuring point, and its dimensions are taken as it passes. 2) Measure with camera and laser: The width, length and height of the load are measured. Pallet overhang and leaning or unstable stacks are assessed as well. 3) Compare with the declaration: The system compares the measurement with the declared value. If they differ, the operator’s AXION alerts and shows the measured value. 4) Record dimensions with a photo: The measurement is recorded with its photo and sent to the transport and billing system.
Components used: fixed camera and laser, TIM INSPECT software, AXION and transport and billing link. The measured value, the declaration and the photo come together in one record. The record goes to your transport and billing system, and the photo is kept as proof of dimensions. High-speed lines may need dedicated hardware, which is assessed together during setup.
As the load passes the measuring point, a fixed camera and laser take its width, length and height. The system compares the measurement with the declared value; if they differ, the operator is alerted and the dimensions are recorded with a photo.
We do not state an accuracy or tolerance figure on this page. Precision depends on the load type, the line speed and the hardware used. Target values are defined together within the pilot and verified by measuring on site.
We have experience with laser measurement, but high-speed lines may need dedicated hardware. We review your line speed and load variety with you before setup and choose the hardware accordingly.
The dimension record can be sent to your transport and billing system. The photo is stored with the record as proof of dimensions. The scope of the connection is planned around the system you use.
The scenario measures the load, not the person. Where people enter the field of view, privacy is designed in from the start: identity is not tracked, images are filtered and only the event moment is stored. Setup is planned in line with KVKK and GDPR requirements.

YOUR SITE
Let’s plan your measuring point together.
Let’s review your load types, line speed and the source of your declared data together, then define the pilot scope and the results to measure from the start.
























