Get a demo

OPERATIONAL EFFICIENCY · DIMENSIONING

Record the dimensions of every load, with a photo.

Measure the width, length and height of cartons and pallets with camera and laser as they pass. When a measurement does not match the declared value or a pallet overhangs, alert the operator through AXION and record the dimensions with a photo.

Discuss dimensioning

Trusted by the world’s leading companies.

Sürat KargoÇimsa
Brisa
Togg
Eti
Arçelik
Yusen Logistics
CEVA Logistics
Aramex
Kühne + Nagel
CarrefourMercedes-Benz
Coca-Cola
Toyota
Renault
Honda
Ford
Stellantis
BSH
Daikin
DiageoLactalis
MANN+HUMMEL
Viessmann
Sika
Measure
Width, length and height
Alert
Declared mismatch or overhang
Record
Dimensions with a photo

THE NEED ON THE FLOOR

Base dimensions on a record, not an estimate.

When freight is billed by volume, a wrong measurement means lost revenue or a dispute. Manual measuring is slow and inconsistent, and overhanging pallets do not fit racks or vehicles. TIM INSPECT measures the load as it passes and compares it with the declared dimensions.

  • 01

    Measure the load as it passes

    The width, length and height of cartons and pallets are taken by camera and laser at the measuring point. Pallet overhang and leaning or unstable stacks are assessed as well.

  • 02

    Tell the operator about the difference

    When a measurement does not match the declared value or a pallet overhangs, the operator’s AXION alerts and shows the measured value.

  • 03

    Keep the dimensions with evidence

    Every measurement is recorded with its photo. The record goes to the transport and billing system, and the photo is kept as proof of dimensions.

EXPLORE THE SITUATION

What happens when dimensions do not match the declaration?

Choose a situation to see what is measured, how the operator is alerted and how the dimension record is created.

Front view of a carton at the measuring point with width and height lines
60 cm
46 cm
Dimension comparison
  • Declared60 × 40 × 40 cm
  • Measured60 × 40 × 46 cm
  • DifferenceHeight +6 cm
Measuring point camera
SituationDeclared mismatch

The height of a carton passing the measuring point is greater than the declared value.

Response on the floor

Camera and laser take the measurement and the system compares it with the declaration. The operator’s AXION alerts and shows the measured value.

System decision

The difference becomes visible at the measuring point. Volume-based billing uses the recorded dimensions.

Dimension check
WidthRecorded
LengthRecorded
HeightDiffers from declared
3Checks
2Recorded
1Open
AXION alert
AXION · Operator · belt
+6Carton size differs
Operator · belt
AXION · Operator · hand
+6Carton size differs
Operator · hand

Screen: “Height 46 cm · declared 40 cm.”

Alert open · dimensions differ from declared

HOW IT WORKS

Measure in transit. Alert on a difference.

Measuring point · Line 2
  • LoadPassing
  • Declared60 × 40 × 40 cm
Measuring point
Measuring station with a fixed camera overhead and laser sensors on the table
Fixed camera
Laser sensor
Measurement
  • Width60 cm
  • Length40 cm
  • Height46 cm
Camera and laser measurement
AXION
46 cmDeclared: 40 cm
Alert to the operator
A pallet whose dimensions are recorded with a photo
120 cm
132 cm
Dimension record
  • Size120 × 80 × 132 cm
  • PhotoAttached
  • SystemSent
Dimension record
01 / 04

Move the load past the measuring point

The carton or pallet passes the measuring point, and its dimensions are taken as it passes.

SYSTEM, RECORD AND INTEGRATION

One dimension record, from measurement to invoice.

The measured value, the declaration and the photo come together in one record. The record goes to your transport and billing system, and the photo is kept as proof of dimensions. High-speed lines may need dedicated hardware, which is assessed together during setup.

Load under the camera gantry
01 / 04

Measuring point

Dimensions are taken by camera and laser as the load passes.

  • SourceFixed camera and laser
  • TimingIn transit
    Components
  • Fixed camera and laser
  • TIM INSPECT software
  • AXION
  • Transport and billing link
  • Measurement on three axes

    Measure width, length and height as the load passes.

  • Overhang and stack checks

    Notice pallet overhang and leaning or unstable stacks.

  • Photo proof of dimensions

    Record every measurement together with its photo.

Review the measured value, the declaration and the photo of every load in one record. When a difference comes up, the image shows what was measured, and the record becomes the shared reference for transport and billing.

SOLUTION FILM

Camera and laser measure. AXION shows the operator the difference.

English narration · horizontal 16:9

TIM INSPECT · EXPLORE SOLUTIONS

One platform. 35 applications.

Discover the next opportunity on your floor. Choose a solution area or industry and explore each application visually.

35 solutions
Operational efficiency

Assembly Sequence Verification

Monitor the defined assembly sequence and flag missed or out-of-order steps.

Automotive · Manufacturing
Operational efficiency

Cycle Time & Microstops

Measure station cycles and brief stops from video to reveal deviations in workflow.

Automotive · Manufacturing
Operational efficiency

Machine Utilization

Assess running and waiting periods visually and notify the relevant team of stops.

Manufacturing · Automotive
Operational efficiency

Dock & Door Monitoring

Track vehicle arrivals, door use and loading progress in one workflow.

Logistics & warehousing · Manufacturing
Operational efficiency

Four-Side Pallet Scanning

Read labels across pallet faces during a pass and match them against the order list.

Logistics & warehousing · Retail & e-commerce · Food & beverage
Operational efficiency

Damage Detection

Document carton, pallet and container damage with photographs at entry and exit points.

Logistics & warehousing · Retail & e-commerce · Manufacturing
Operational efficiency

Inventory Counting

Read shelf and pallet labels to reveal empty locations and placement mismatches.

Logistics & warehousing · Retail & e-commerce · Manufacturing
Operational efficiency

License Plate & Container OCR

Read vehicle and container numbers and match them with appointment and shipment records.

Logistics & warehousing · Manufacturing
Operational efficiency

Conveyor Jam Detection

Detect conveyor build-ups and jams and notify the person who can respond.

Logistics & warehousing · Manufacturing · Food & beverage
Verification & quality

Shipment & Crate Verification

Count passing crates, read their labels and match the load against the shipment list.

Automotive · Logistics & warehousing
Verification & quality

Returned Product Inspection

Identify returned products and record visual checks of damage, dates and product information.

Food & beverage · Retail & e-commerce · Logistics & warehousing
Verification & quality

Voice-Guided Final Inspection

Complete hands-free inspection steps and document findings with voice and photographs.

Automotive · Manufacturing
Verification & quality

Assembly Part Verification

Check parts, labels and surfaces during assembly and send the result to production systems.

Automotive · Manufacturing
Verification & quality

Cargo Sortation & Pallet Verification

Verify outgoing cargo by checking shipping labels and pallet contents together.

Logistics & warehousing · Aviation
Verification & quality

Metal Part & Label Verification

Match stamped metal-part numbers with crate labels to verify product identity.

Automotive · Manufacturing
Verification & quality

Quick-Connect Verification

Visually check that assembly quick-connects are fully seated and record the result.

Automotive · Manufacturing
Verification & quality

Vehicle Label Verification

Read vehicle-specific labels with OCR and compare them with expected production data.

Automotive · Manufacturing
Verification & quality

Component Assembly Inspection

Visually verify the assembly of components such as retaining rings, washers and plugs.

Automotive · Manufacturing
Verification & quality

Product & Carton Verification

Combine product, plug, label and carton-content checks before shipment.

Automotive · Manufacturing · Logistics & warehousing
Workplace safety

Forklift–Pedestrian Safety

Analyze risky encounters from camera feeds and alert the people involved through AXION.

Manufacturing · Logistics & warehousing
Workplace safety

Restricted-Zone Detection

Detect entry into hazardous areas and alert the worker and responsible team.

Manufacturing · Construction
Workplace safety

PPE Detection

Check the use of helmets, vests and other protective equipment in working areas.

Manufacturing · Construction · Logistics & warehousing
Workplace safety

Fire & Smoke Early Warning

Evaluate visible flame and smoke signs in camera feeds and notify the relevant team.

Manufacturing · Logistics & warehousing · Energy & facilities
Workplace safety

Spill & Leak Detection

Detect unexpected liquid accumulation and leaks, and notify teams with location information.

Manufacturing · Food & beverage · Energy & facilities
Workplace safety

Fallen or Motionless Person Detection

Detect falls or prolonged inactivity to support the assistance workflow.

Manufacturing · Logistics & warehousing · Energy & facilities
Workplace safety

Ergonomics & Posture Analysis

Analyze lifting, bending and reaching movements to make risky postures visible.

Manufacturing · Logistics & warehousing
Workplace safety

Working-at-Height Safety

Use visual checks to assess harness attachment, scaffolding and ladder use.

Construction · Energy & facilities · Manufacturing
Workplace safety

Lockout/Tagout Verification

Verify isolation steps with photographs to manage checks before maintenance.

Manufacturing · Energy & facilities
Workplace safety

Emergency Exit & Route Monitoring

Detect obstructions blocking emergency exits and access routes through camera feeds.

Manufacturing · Logistics & warehousing · Retail & e-commerce
Workplace safety

Loading Dock Safety

Check truck position, wheel chocks and dock conditions to flag risky loading situations.

Logistics & warehousing · Manufacturing
Facility monitoring

Gauge & Meter Reading

Read analog gauges from images, record values and notify teams of threshold exceptions.

Manufacturing · Energy & facilities
Facility monitoring

Maintenance Rounds

Follow inspection points step by step and document findings with photographs and voice.

Manufacturing · Energy & facilities
Facility monitoring

Unauthorized Entry

Monitor designated-area entry and tailgating and notify the security team.

Manufacturing · Logistics & warehousing · Retail & e-commerce
Facility monitoring

Environmental Monitoring

Monitor visible emissions, dust and waste-sorting conditions through camera feeds.

Manufacturing · Energy & facilities

FAQ

Questions, answered

Dimensioning is an operational efficiency solution on Thread In Motion’s TIM INSPECT platform that measures carton and pallet dimensions in transit with camera and laser, comparing them with the declared values. On a mismatch or overhang, the operator is alerted through AXION; each measurement is recorded with a photo.

With TIM INSPECT, Dimensioning works in four steps: 1) Move the load past the measuring point: The carton or pallet passes the measuring point, and its dimensions are taken as it passes. 2) Measure with camera and laser: The width, length and height of the load are measured. Pallet overhang and leaning or unstable stacks are assessed as well. 3) Compare with the declaration: The system compares the measurement with the declared value. If they differ, the operator’s AXION alerts and shows the measured value. 4) Record dimensions with a photo: The measurement is recorded with its photo and sent to the transport and billing system.

Components used: fixed camera and laser, TIM INSPECT software, AXION and transport and billing link. The measured value, the declaration and the photo come together in one record. The record goes to your transport and billing system, and the photo is kept as proof of dimensions. High-speed lines may need dedicated hardware, which is assessed together during setup.

As the load passes the measuring point, a fixed camera and laser take its width, length and height. The system compares the measurement with the declared value; if they differ, the operator is alerted and the dimensions are recorded with a photo.

We do not state an accuracy or tolerance figure on this page. Precision depends on the load type, the line speed and the hardware used. Target values are defined together within the pilot and verified by measuring on site.

We have experience with laser measurement, but high-speed lines may need dedicated hardware. We review your line speed and load variety with you before setup and choose the hardware accordingly.

The dimension record can be sent to your transport and billing system. The photo is stored with the record as proof of dimensions. The scope of the connection is planned around the system you use.

The scenario measures the load, not the person. Where people enter the field of view, privacy is designed in from the start: identity is not tracked, images are filtered and only the event moment is stored. Setup is planned in line with KVKK and GDPR requirements.

YOUR SITE

Let’s plan your measuring point together.

Let’s review your load types, line speed and the source of your declared data together, then define the pilot scope and the results to measure from the start.

Request a solution discussioninfo@threadinmotion.com
Chat on WhatsApp WhatsApp'tan yazın