Get a demo

FACILITY MONITORING · MAINTENANCE ROUNDS

Document maintenance rounds with photos.

The technician walks through the inspection points step by step with AXION. At each point the tag is verified, a photo is taken and findings are recorded by voice; when the round is complete, the record is written to the maintenance management system.

Discuss maintenance rounds

Trusted by the world’s leading companies.

Sürat KargoÇimsa
Brisa
Togg
Eti
Arçelik
Yusen Logistics
CEVA Logistics
Aramex
Kühne + Nagel
CarrefourMercedes-Benz
Coca-Cola
Toyota
Renault
Honda
Ford
Stellantis
BSH
Daikin
DiageoLactalis
MANN+HUMMEL
Viessmann
Sika
Guide
Announce the next point by voice
Document
Photograph every point
Record
Findings by voice, round to system

THE NEED ON THE FLOOR

Keep a photo record of the round, not just a signed form.

Round forms get signed, but the record does not show whether the inspection point was actually visited. Finding descriptions are often incomplete and come without photos, and it is hard to trace when a fault was first seen. TIM INSPECT runs the round step by step on AXION and records every point with its photo.

  • 01

    Show that the point was visited

    The technician photographs each inspection point. The tag at the point is read to verify that they are in front of the right equipment.

  • 02

    Record findings by voice

    The technician says what they see and the system turns it into text. The finding is added to the round record together with the photo of the point.

  • 03

    Compare with the previous round

    Photos are stored per equipment. If there is a clear change since the previous round, AXION draws attention with a vibration.

EXPLORE THE SITUATION

What does a round catch along the way?

Choose a situation to follow what is checked in the photo, what AXION tells the technician and what goes into the round record.

A technician inspects fittings with a torch; VALVE 1 and VALVE 2 tags sit side by side on the panel
Tag read
Point 4 / 8
  • ExpectedVALVE 2
  • ReadVALVE 1
  • PhotoOn hold
AXION camera · point photo
SituationTag does not match

The next point in the round is VALVE 2. Of two similar fittings side by side, the technician photographs the one tagged VALVE 1.

Response on the floor

The tag that was read does not match the next point. AXION alerts the technician and repeats the right point; the photo is not recorded for this point.

System decision

Every photo is stored with its verified point, so the record shows that the point was actually visited.

Point checks
Next pointDone
Point tagNo match
PhotoWaiting
Finding noteWaiting
4Steps
1Done
3Open
AXION alert
AXION · During the round · belt
!Wrong point
During the round · belt
AXION · Taking the photo · hand
!Wrong point
Taking the photo · hand

Voice alert: “Tag does not match. Next point is VALVE 2.”

Point open · tag does not match

HOW IT WORKS

Go there. Photograph. Say what you find.

AXION
4/8Next point
Round · Filling line
  • Point 4Next
  • Point 5Waiting
  • Point 6Waiting
Round task
Point 4 / 8
  • TagVerified
  • PhotoTaken
Point photo
AXION
!Change found
Spoken finding
  • NoteCoupling leak
  • TextOn record
Finding and change alert
A worker in a hi-vis vest reviews the round record on a laptop in the maintenance workshop
Round record
  • Points8 / 8
  • Findings1
  • SystemWritten
Round record
01 / 04

Receive the round task

The round task arrives on AXION. AXION announces the next point and what to look at there.

SYSTEM, RECORD AND INTEGRATION

One workflow from round task to maintenance record.

The round task, the point photos and the spoken findings come together in one record. When the round is complete, it is written to the maintenance management system, and the photos build a history for each piece of equipment.

Inspection point with its tags visible
01 / 04

Point photo

The photo the technician takes with AXION at each inspection point.

  • SourceAXION camera
  • VerificationPoint tag
    Components
  • AXION
  • TIM INSPECT software
  • Maintenance management system
  • Rounds backed by photos

    A visit is documented by a photo with a verified tag, not by a signature.

  • Voice-recorded findings

    A finding is spoken, turned into text and stored with its photo.

  • History per equipment

    Follow the photo history of each piece of equipment from round to round.

Review in one record which point was visited and when, the photo taken there and the finding that was spoken. Use the photo history of the equipment to find the round in which a fault was first seen.

SOLUTION FILM

AXION announces the point. The photo documents the round.

English narration · horizontal 16:9

TIM INSPECT · EXPLORE SOLUTIONS

One platform. 35 applications.

Discover the next opportunity on your floor. Choose a solution area or industry and explore each application visually.

35 solutions
Facility monitoring

Gauge & Meter Reading

Read analog gauges from images, record values and notify teams of threshold exceptions.

Manufacturing · Energy & facilities
Facility monitoring

Unauthorized Entry

Monitor designated-area entry and tailgating and notify the security team.

Manufacturing · Logistics & warehousing · Retail & e-commerce
Facility monitoring

Environmental Monitoring

Monitor visible emissions, dust and waste-sorting conditions through camera feeds.

Manufacturing · Energy & facilities
Verification & quality

Shipment & Crate Verification

Count passing crates, read their labels and match the load against the shipment list.

Automotive · Logistics & warehousing
Verification & quality

Returned Product Inspection

Identify returned products and record visual checks of damage, dates and product information.

Food & beverage · Retail & e-commerce · Logistics & warehousing
Verification & quality

Voice-Guided Final Inspection

Complete hands-free inspection steps and document findings with voice and photographs.

Automotive · Manufacturing
Verification & quality

Assembly Part Verification

Check parts, labels and surfaces during assembly and send the result to production systems.

Automotive · Manufacturing
Verification & quality

Cargo Sortation & Pallet Verification

Verify outgoing cargo by checking shipping labels and pallet contents together.

Logistics & warehousing · Aviation
Verification & quality

Metal Part & Label Verification

Match stamped metal-part numbers with crate labels to verify product identity.

Automotive · Manufacturing
Verification & quality

Quick-Connect Verification

Visually check that assembly quick-connects are fully seated and record the result.

Automotive · Manufacturing
Verification & quality

Vehicle Label Verification

Read vehicle-specific labels with OCR and compare them with expected production data.

Automotive · Manufacturing
Verification & quality

Component Assembly Inspection

Visually verify the assembly of components such as retaining rings, washers and plugs.

Automotive · Manufacturing
Verification & quality

Product & Carton Verification

Combine product, plug, label and carton-content checks before shipment.

Automotive · Manufacturing · Logistics & warehousing
Workplace safety

Forklift–Pedestrian Safety

Analyze risky encounters from camera feeds and alert the people involved through AXION.

Manufacturing · Logistics & warehousing
Workplace safety

Restricted-Zone Detection

Detect entry into hazardous areas and alert the worker and responsible team.

Manufacturing · Construction
Workplace safety

PPE Detection

Check the use of helmets, vests and other protective equipment in working areas.

Manufacturing · Construction · Logistics & warehousing
Workplace safety

Fire & Smoke Early Warning

Evaluate visible flame and smoke signs in camera feeds and notify the relevant team.

Manufacturing · Logistics & warehousing · Energy & facilities
Workplace safety

Spill & Leak Detection

Detect unexpected liquid accumulation and leaks, and notify teams with location information.

Manufacturing · Food & beverage · Energy & facilities
Workplace safety

Fallen or Motionless Person Detection

Detect falls or prolonged inactivity to support the assistance workflow.

Manufacturing · Logistics & warehousing · Energy & facilities
Workplace safety

Ergonomics & Posture Analysis

Analyze lifting, bending and reaching movements to make risky postures visible.

Manufacturing · Logistics & warehousing
Workplace safety

Working-at-Height Safety

Use visual checks to assess harness attachment, scaffolding and ladder use.

Construction · Energy & facilities · Manufacturing
Workplace safety

Lockout/Tagout Verification

Verify isolation steps with photographs to manage checks before maintenance.

Manufacturing · Energy & facilities
Workplace safety

Emergency Exit & Route Monitoring

Detect obstructions blocking emergency exits and access routes through camera feeds.

Manufacturing · Logistics & warehousing · Retail & e-commerce
Workplace safety

Loading Dock Safety

Check truck position, wheel chocks and dock conditions to flag risky loading situations.

Logistics & warehousing · Manufacturing
Operational efficiency

Assembly Sequence Verification

Monitor the defined assembly sequence and flag missed or out-of-order steps.

Automotive · Manufacturing
Operational efficiency

Cycle Time & Microstops

Measure station cycles and brief stops from video to reveal deviations in workflow.

Automotive · Manufacturing
Operational efficiency

Machine Utilization

Assess running and waiting periods visually and notify the relevant team of stops.

Manufacturing · Automotive
Operational efficiency

Dock & Door Monitoring

Track vehicle arrivals, door use and loading progress in one workflow.

Logistics & warehousing · Manufacturing
Operational efficiency

Four-Side Pallet Scanning

Read labels across pallet faces during a pass and match them against the order list.

Logistics & warehousing · Retail & e-commerce · Food & beverage
Operational efficiency

Dimensioning

Check carton and pallet dimensions with vision and laser measurement and create a record.

Logistics & warehousing · Retail & e-commerce
Operational efficiency

Damage Detection

Document carton, pallet and container damage with photographs at entry and exit points.

Logistics & warehousing · Retail & e-commerce · Manufacturing
Operational efficiency

Inventory Counting

Read shelf and pallet labels to reveal empty locations and placement mismatches.

Logistics & warehousing · Retail & e-commerce · Manufacturing
Operational efficiency

License Plate & Container OCR

Read vehicle and container numbers and match them with appointment and shipment records.

Logistics & warehousing · Manufacturing
Operational efficiency

Conveyor Jam Detection

Detect conveyor build-ups and jams and notify the person who can respond.

Logistics & warehousing · Manufacturing · Food & beverage

FAQ

Questions, answered

Maintenance Rounds is a facility monitoring solution on Thread In Motion’s TIM INSPECT platform that runs rounds on AXION, recording each inspection point with a photo, a verified tag and spoken findings. AXION flags clear changes since the last round; completed rounds are written to the maintenance management system.

With TIM INSPECT, Maintenance Rounds works in four steps: 1) Receive the round task: The round task arrives on AXION. AXION announces the next point and what to look at there. 2) Photograph the point: The technician photographs the inspection point. The tag is read to verify that it is the right equipment. 3) Record findings by voice: If there is a finding, the technician says it and the system turns it into text. On a clear change since the last round, AXION vibrates. 4) Write the round to the system: When the round is complete, the record is written to the maintenance management system. Photos are kept as a history per equipment.

Components used: AXION, TIM INSPECT software and maintenance management system. The round task, the point photos and the spoken findings come together in one record. When the round is complete, it is written to the maintenance management system, and the photos build a history for each piece of equipment.

When the technician photographs the point, the tag at the inspection point is read to verify that they are in front of the right equipment. The photo is added to the round record with its point and time.

The condition of the equipment: leaks, loose connections, wear and missing guards. The photo is compared with the photo of the same point from the previous round, and AXION vibrates on a clear change. The technician puts the finding on record by saying it.

The technician says what they see; the system turns it into text and stores it with the photo of the point. That way a finding does not end up with an incomplete description or without a photo.

When the round is complete, the record is written to the maintenance management system; the integration scope is planned around the system used on site. Voice-guided, step-by-step checking is a method we already apply on the quality control side; maintenance rounds are its counterpart for maintenance.

If a person or confidential information is visible in a photo, it is filtered. The retention period is agreed together with you, and the setup is designed in line with KVKK and GDPR requirements. Photos are kept as a history per equipment.

YOUR SITE

Let’s define your maintenance rounds together.

Let’s review your round lists, inspection points and maintenance management system together, and agree up front on the three metrics to measure at the end of the pilot.

Request a solution discussioninfo@threadinmotion.com
Chat on WhatsApp WhatsApp'tan yazın