OPERATIONAL EFFICIENCY · DAMAGE DETECTION
Document damage before it leaves the gate.
Detect damage on cartons, pallets and containers on camera at shipping and receiving points. Alert the operator carrying the damaged load through AXION, and record a photo of the damage with its time and location.
Trusted by the world’s leading companies.
THE NEED ON THE FLOOR
Show on record where the damage occurred.
When nobody can tell where damage occurred, responsibility is disputed, and damaged goods are often noticed only after they reach the customer. Manual checks cannot cover every carton either. TIM INSPECT checks the load on camera at exit and entry points and documents damage on the spot.
- 01
Check every load as it passes
Fixed cameras at shipping and receiving points assess the passing load: crushed, torn or wet cartons, broken pallets, loose stretch film, leaning stacks.
- 02
Show the operator where the damage is
When a damaged load is detected, the AXION of the operator carrying it vibrates and shows where the damage is. The operator sets the load aside or approves it.
- 03
Attach the evidence to the document
The damage photo is recorded with its time and location and attached to the shipping or receiving document. It serves as evidence for the carrier and the insurer.
EXPLORE THE SITUATION
What happens when a damaged load passes?
Choose a situation to see what the camera marks, how the operator is alerted and how the damage record closes.

Damage detection
- FindingTorn, crushed
- LocationMiddle carton
- DecisionSet aside
On a pallet arriving at the shipping point, the middle carton is torn and crushed at one corner.
The camera marks the damage. The AXION of the operator carrying the load vibrates and shows where it is; the operator sets the carton aside.
The damage is recorded with its photo before the shipment leaves the gate and attached to the shipping document.
Carton surfaceDamagedCorners and edgesDamagedStack alignmentNo damage

Vibration and screen: “Damage · middle row, middle carton. Set the carton aside.”
HOW IT WORKS
Detect on passing. Record with a photo.
Shipping point 2
- ShipmentSVK-3120
- CheckOn passing

Damage detection
- Carton surfaceTear
- Corners and edgesCrushed
- StackNo damage


Damage record
- Time14:32
- LocationShipping point 2
- DocumentSVK-3120
- PhotoAttached
Move the load past the checkpoint
Fixed cameras at shipping and receiving points capture the carton, pallet or container as it passes.
SYSTEM AND RECORD
One damage record, from detection to document.
The camera’s detection, the alert to the operator and the operator’s decision come together in one record. The record is attached to the shipping or receiving document and serves as evidence for the carrier and the insurer.

Passing view
Load images from cameras at shipping and receiving points.
- SourceFixed cameras
- PointShipping and receiving
- Components
- Fixed cameras
- TIM INSPECT software
- AXION
- Shipping and receiving document link
Checks at exit and entry
Document damage at both shipping and receiving points.
You define the limit
Set your own criteria for which damage is unacceptable.
Records that serve as evidence
Store the photo with its time and location.
Review in one record, with its photo, where and when a damage was detected and what the operator decided. The damage is documented as the load passes the gate, not when a complaint arrives.
SOLUTION FILM
The camera marks the damage. AXION shows the operator where it is.

TIM INSPECT · EXPLORE SOLUTIONS
One platform. 35 applications.
Discover the next opportunity on your floor. Choose a solution area or industry and explore each application visually.
Operational efficiencyAssembly Sequence Verification
Monitor the defined assembly sequence and flag missed or out-of-order steps.
Automotive · Manufacturing
Operational efficiencyCycle Time & Microstops
Measure station cycles and brief stops from video to reveal deviations in workflow.
Automotive · Manufacturing
Operational efficiencyMachine Utilization
Assess running and waiting periods visually and notify the relevant team of stops.
Manufacturing · Automotive
Operational efficiencyDock & Door Monitoring
Track vehicle arrivals, door use and loading progress in one workflow.
Logistics & warehousing · Manufacturing
Operational efficiencyFour-Side Pallet Scanning
Read labels across pallet faces during a pass and match them against the order list.
Logistics & warehousing · Retail & e-commerce · Food & beverage
Operational efficiencyDimensioning
Check carton and pallet dimensions with vision and laser measurement and create a record.
Logistics & warehousing · Retail & e-commerce
Operational efficiencyInventory Counting
Read shelf and pallet labels to reveal empty locations and placement mismatches.
Logistics & warehousing · Retail & e-commerce · Manufacturing
Operational efficiencyLicense Plate & Container OCR
Read vehicle and container numbers and match them with appointment and shipment records.
Logistics & warehousing · Manufacturing
Operational efficiencyConveyor Jam Detection
Detect conveyor build-ups and jams and notify the person who can respond.
Logistics & warehousing · Manufacturing · Food & beverage
Verification & qualityShipment & Crate Verification
Count passing crates, read their labels and match the load against the shipment list.
Automotive · Logistics & warehousing
Verification & qualityReturned Product Inspection
Identify returned products and record visual checks of damage, dates and product information.
Food & beverage · Retail & e-commerce · Logistics & warehousing
Verification & qualityVoice-Guided Final Inspection
Complete hands-free inspection steps and document findings with voice and photographs.
Automotive · Manufacturing
Verification & qualityAssembly Part Verification
Check parts, labels and surfaces during assembly and send the result to production systems.
Automotive · Manufacturing
Verification & qualityCargo Sortation & Pallet Verification
Verify outgoing cargo by checking shipping labels and pallet contents together.
Logistics & warehousing · Aviation
Verification & qualityMetal Part & Label Verification
Match stamped metal-part numbers with crate labels to verify product identity.
Automotive · Manufacturing
Verification & qualityQuick-Connect Verification
Visually check that assembly quick-connects are fully seated and record the result.
Automotive · Manufacturing
Verification & qualityVehicle Label Verification
Read vehicle-specific labels with OCR and compare them with expected production data.
Automotive · Manufacturing
Verification & qualityComponent Assembly Inspection
Visually verify the assembly of components such as retaining rings, washers and plugs.
Automotive · Manufacturing
Verification & qualityProduct & Carton Verification
Combine product, plug, label and carton-content checks before shipment.
Automotive · Manufacturing · Logistics & warehousing
Workplace safetyForklift–Pedestrian Safety
Analyze risky encounters from camera feeds and alert the people involved through AXION.
Manufacturing · Logistics & warehousing
Workplace safetyRestricted-Zone Detection
Detect entry into hazardous areas and alert the worker and responsible team.
Manufacturing · Construction
Workplace safetyPPE Detection
Check the use of helmets, vests and other protective equipment in working areas.
Manufacturing · Construction · Logistics & warehousing
Workplace safetyFire & Smoke Early Warning
Evaluate visible flame and smoke signs in camera feeds and notify the relevant team.
Manufacturing · Logistics & warehousing · Energy & facilities
Workplace safetySpill & Leak Detection
Detect unexpected liquid accumulation and leaks, and notify teams with location information.
Manufacturing · Food & beverage · Energy & facilities
Workplace safetyFallen or Motionless Person Detection
Detect falls or prolonged inactivity to support the assistance workflow.
Manufacturing · Logistics & warehousing · Energy & facilities
Workplace safetyErgonomics & Posture Analysis
Analyze lifting, bending and reaching movements to make risky postures visible.
Manufacturing · Logistics & warehousing
Workplace safetyWorking-at-Height Safety
Use visual checks to assess harness attachment, scaffolding and ladder use.
Construction · Energy & facilities · Manufacturing
Workplace safetyLockout/Tagout Verification
Verify isolation steps with photographs to manage checks before maintenance.
Manufacturing · Energy & facilities
Workplace safetyEmergency Exit & Route Monitoring
Detect obstructions blocking emergency exits and access routes through camera feeds.
Manufacturing · Logistics & warehousing · Retail & e-commerce
Workplace safetyLoading Dock Safety
Check truck position, wheel chocks and dock conditions to flag risky loading situations.
Logistics & warehousing · Manufacturing
Facility monitoringGauge & Meter Reading
Read analog gauges from images, record values and notify teams of threshold exceptions.
Manufacturing · Energy & facilities
Facility monitoringMaintenance Rounds
Follow inspection points step by step and document findings with photographs and voice.
Manufacturing · Energy & facilities
Facility monitoringUnauthorized Entry
Monitor designated-area entry and tailgating and notify the security team.
Manufacturing · Logistics & warehousing · Retail & e-commerce
Facility monitoringEnvironmental Monitoring
Monitor visible emissions, dust and waste-sorting conditions through camera feeds.
Manufacturing · Energy & facilitiesFAQ
Questions, answered
Damage Detection is an operational efficiency solution on Thread In Motion’s TIM INSPECT platform that detects carton, pallet and container damage from fixed cameras at shipping and receiving points. The operator is alerted through AXION; a photo with time and location is attached to the shipping or receiving document.
With TIM INSPECT, Damage Detection works in four steps: 1) Move the load past the checkpoint: Fixed cameras at shipping and receiving points capture the carton, pallet or container as it passes. 2) Detect and mark the damage: TIM INSPECT marks crushed, torn or wet cartons, broken pallets, loose stretch film and leaning stacks in the image. 3) Alert the operator: The AXION of the operator carrying the load vibrates and shows where the damage is. The operator sets the load aside or approves it. 4) Record it with a photo: The damage photo is recorded with its time and location and attached to the shipping or receiving document.
Components used: fixed cameras, TIM INSPECT software, AXION and shipping and receiving document link. The camera’s detection, the alert to the operator and the operator’s decision come together in one record. The record is attached to the shipping or receiving document and serves as evidence for the carrier and the insurer.
This scenario covers crushed, torn and wet cartons, broken pallets, loose stretch film, dents or holes in containers and trailers, and leaning stacks. The scope is confirmed during setup, based on the camera view at the checkpoint and on your load types.
You do. You define with your own criteria which damage counts as unacceptable, and the system marks accordingly. When alerted, the operator sets the load aside or approves it, and the decision goes on record.
The damage photo is recorded with its time and location and attached to the shipping or receiving document. The record can serve as evidence for the carrier and the insurer.
The scenario assesses the load, not the person. Where people enter the field of view, privacy is designed in from the start: identity is not tracked, images are filtered and only the event moment is stored. Setup is planned in line with KVKK and GDPR requirements.
Together we define your checkpoints, your load types and what you count as unacceptable damage. The metrics to measure at the end of the pilot are set from the start, and results are assessed against them.

YOUR SITE
Let’s define your checkpoints together.
Let’s review your exit and entry points, load types and your definition of unacceptable damage together, then define the pilot scope and the results to measure from the start.
























