Get a demo

WORKPLACE SAFETY · LOADING DOCK SAFETY

Verify dock conditions before entering the trailer.

Check from camera feeds that the truck is fully docked, the wheel chock is in place and the dock leveler is positioned. If the chock is missing or the truck moves, alert the forklift operator heading into the trailer through AXION.

Discuss dock safety

Trusted by the world’s leading companies.

Sürat KargoÇimsa
Brisa
Togg
Eti
Arçelik
Yusen Logistics
CEVA Logistics
Aramex
Kühne + Nagel
CarrefourMercedes-Benz
Coca-Cola
Toyota
Renault
Honda
Ford
Stellantis
BSH
Daikin
DiageoLactalis
MANN+HUMMEL
Viessmann
Sika
Check
Truck position, chock and dock leveler
Alert
The operator, before entering the trailer
Record
The event with a short video

THE NEED ON THE FLOOR

Don’t leave dock checks to one person’s attention.

A truck that pulls away early or creeps forward can cause a forklift to fall at the dock. On many sites, checking the chock and the lock is left to the driver and the operator. TIM INSPECT checks dock conditions from camera feeds before loading starts and while it continues.

  • 01

    Verify conditions before loading

    When a truck docks, the camera checks its position, the wheel chock and the dock leveler. Loading is released once the conditions are met.

  • 02

    Alert the operator before entry

    If the chock is missing or the truck moves, the AXION of the forklift operator about to enter the trailer vibrates and gives a voice alert.

  • 03

    Record the event with video

    Each event is recorded with a short video, so you can review later which condition failed at which dock.

EXPLORE THE SITUATION

What happens when a dock condition fails?

Pick one of three situations: which condition the camera watches, how the alert reaches the operator and when loading is released again.

View from inside the warehouse: a docked trailer and a forklift at the trailer entrance
Trailer · in position ✓
Forklift · at trailer entrance
Dock 2 · before loading
  • Truck positionOK
  • Wheel chockNot seen
  • LoadingOn hold
Dock door camera
SituationChock not verified

The truck has docked, but the camera sees no chock at the wheels. A forklift is at the trailer entrance.

Response on the floor

The operator’s AXION vibrates and gives a voice alert. The operator waits outside the trailer while the chock is placed.

System decision

The chock condition stays open. The alert does not close until the camera verifies the chock.

Dock conditions
Truck positionMet
Wheel chockNot seen
Dock levelerChecking
Dock edgeMet
4Conditions
2Met
1Open
AXION alert
AXION · Forklift operator · belt
!Chock not in place
Forklift operator · belt
AXION · Forklift operator · hand
!Chock not in place
Forklift operator · hand

Voice alert: “Chock not in place. Do not enter the trailer.”

Alert open · chock not verified

HOW IT WORKS

Verify. Monitor. Alert when a condition fails.

Dock door seen from inside the warehouse, with the docked trailer and the dock leveler marked
Trailer
Dock leveler
Dock 2 · docking
  • Truck positionChecked
  • Wheel chockChecking
  • Dock levelerNext
Docking check
A forklift loading inside the docked trailer
Forklift · in the trailer
Dock 2 · conditions
  • Truck positionOK
  • Wheel chockOK
  • Dock levelerOK
  • LoadingReleased
Loading released
Forklift operator · hand
!Truck is moving
Forklift operator · hand
Forklift operator · belt
!No chock
Forklift operator · belt
Alert to the operator
Top view of a truck in the loading area with the event record on screen
Event record
  • Dock2
  • ConditionTruck movement
  • Short videoStored
  • ClosedPosition verified
Event record
01 / 04

Verify docking

The truck backs up to the dock. The camera checks its position, the wheel chock and the dock leveler.

SYSTEM, RECORD AND INTEGRATION

One workflow from dock condition to event record.

The conditions verified by the camera, the alert to the operator and the event record come together in one workflow. Where needed, it connects to the dock light and door control. Cameras already installed for shipment verification can also serve this scenario.

Dock door and a docked trailer seen from inside the warehouse
01 / 04

Dock view

The truck, the chock area and the dock leveler seen by dock cameras.

  • SourceFixed cameras
  • CoverageDock and approach area
    Components
  • Fixed cameras
  • TIM INSPECT software
  • AXION
  • Dock light and door integration
  • Verification before loading

    Position and chock are checked before a forklift enters the trailer.

  • Alerts that reach the operator

    The alert goes to the device of the operator heading into the trailer.

  • Setup with existing cameras

    Sites with shipment door cameras may not need extra cameras.

Review in one record which dock and which condition an alert was opened for, and when it closed. Short event videos help you assess dock rules and site layout against concrete records.

SOLUTION FILM

Cameras check the dock. AXION alerts the operator in time.

English narration · horizontal 16:9

TIM INSPECT · EXPLORE SOLUTIONS

One platform. 35 applications.

Discover the next opportunity on your floor. Choose a solution area or industry and explore each application visually.

35 solutions
Workplace safety

Forklift–Pedestrian Safety

Analyze risky encounters from camera feeds and alert the people involved through AXION.

Manufacturing · Logistics & warehousing
Workplace safety

Restricted-Zone Detection

Detect entry into hazardous areas and alert the worker and responsible team.

Manufacturing · Construction
Workplace safety

PPE Detection

Check the use of helmets, vests and other protective equipment in working areas.

Manufacturing · Construction · Logistics & warehousing
Workplace safety

Fire & Smoke Early Warning

Evaluate visible flame and smoke signs in camera feeds and notify the relevant team.

Manufacturing · Logistics & warehousing · Energy & facilities
Workplace safety

Spill & Leak Detection

Detect unexpected liquid accumulation and leaks, and notify teams with location information.

Manufacturing · Food & beverage · Energy & facilities
Workplace safety

Fallen or Motionless Person Detection

Detect falls or prolonged inactivity to support the assistance workflow.

Manufacturing · Logistics & warehousing · Energy & facilities
Workplace safety

Ergonomics & Posture Analysis

Analyze lifting, bending and reaching movements to make risky postures visible.

Manufacturing · Logistics & warehousing
Workplace safety

Working-at-Height Safety

Use visual checks to assess harness attachment, scaffolding and ladder use.

Construction · Energy & facilities · Manufacturing
Workplace safety

Lockout/Tagout Verification

Verify isolation steps with photographs to manage checks before maintenance.

Manufacturing · Energy & facilities
Workplace safety

Emergency Exit & Route Monitoring

Detect obstructions blocking emergency exits and access routes through camera feeds.

Manufacturing · Logistics & warehousing · Retail & e-commerce
Verification & quality

Shipment & Crate Verification

Count passing crates, read their labels and match the load against the shipment list.

Automotive · Logistics & warehousing
Verification & quality

Returned Product Inspection

Identify returned products and record visual checks of damage, dates and product information.

Food & beverage · Retail & e-commerce · Logistics & warehousing
Verification & quality

Voice-Guided Final Inspection

Complete hands-free inspection steps and document findings with voice and photographs.

Automotive · Manufacturing
Verification & quality

Assembly Part Verification

Check parts, labels and surfaces during assembly and send the result to production systems.

Automotive · Manufacturing
Verification & quality

Cargo Sortation & Pallet Verification

Verify outgoing cargo by checking shipping labels and pallet contents together.

Logistics & warehousing · Aviation
Verification & quality

Metal Part & Label Verification

Match stamped metal-part numbers with crate labels to verify product identity.

Automotive · Manufacturing
Verification & quality

Quick-Connect Verification

Visually check that assembly quick-connects are fully seated and record the result.

Automotive · Manufacturing
Verification & quality

Vehicle Label Verification

Read vehicle-specific labels with OCR and compare them with expected production data.

Automotive · Manufacturing
Verification & quality

Component Assembly Inspection

Visually verify the assembly of components such as retaining rings, washers and plugs.

Automotive · Manufacturing
Verification & quality

Product & Carton Verification

Combine product, plug, label and carton-content checks before shipment.

Automotive · Manufacturing · Logistics & warehousing
Operational efficiency

Assembly Sequence Verification

Monitor the defined assembly sequence and flag missed or out-of-order steps.

Automotive · Manufacturing
Operational efficiency

Cycle Time & Microstops

Measure station cycles and brief stops from video to reveal deviations in workflow.

Automotive · Manufacturing
Operational efficiency

Machine Utilization

Assess running and waiting periods visually and notify the relevant team of stops.

Manufacturing · Automotive
Operational efficiency

Dock & Door Monitoring

Track vehicle arrivals, door use and loading progress in one workflow.

Logistics & warehousing · Manufacturing
Operational efficiency

Four-Side Pallet Scanning

Read labels across pallet faces during a pass and match them against the order list.

Logistics & warehousing · Retail & e-commerce · Food & beverage
Operational efficiency

Dimensioning

Check carton and pallet dimensions with vision and laser measurement and create a record.

Logistics & warehousing · Retail & e-commerce
Operational efficiency

Damage Detection

Document carton, pallet and container damage with photographs at entry and exit points.

Logistics & warehousing · Retail & e-commerce · Manufacturing
Operational efficiency

Inventory Counting

Read shelf and pallet labels to reveal empty locations and placement mismatches.

Logistics & warehousing · Retail & e-commerce · Manufacturing
Operational efficiency

License Plate & Container OCR

Read vehicle and container numbers and match them with appointment and shipment records.

Logistics & warehousing · Manufacturing
Operational efficiency

Conveyor Jam Detection

Detect conveyor build-ups and jams and notify the person who can respond.

Logistics & warehousing · Manufacturing · Food & beverage
Facility monitoring

Gauge & Meter Reading

Read analog gauges from images, record values and notify teams of threshold exceptions.

Manufacturing · Energy & facilities
Facility monitoring

Maintenance Rounds

Follow inspection points step by step and document findings with photographs and voice.

Manufacturing · Energy & facilities
Facility monitoring

Unauthorized Entry

Monitor designated-area entry and tailgating and notify the security team.

Manufacturing · Logistics & warehousing · Retail & e-commerce
Facility monitoring

Environmental Monitoring

Monitor visible emissions, dust and waste-sorting conditions through camera feeds.

Manufacturing · Energy & facilities

FAQ

Questions, answered

Loading Dock Safety is a workplace safety solution on Thread In Motion’s TIM INSPECT platform that checks truck position, wheel chock and dock leveler from fixed camera feeds. When a condition fails, the forklift operator heading into the trailer is alerted through AXION, and the event is recorded.

With TIM INSPECT, Loading Dock Safety works in four steps: 1) Verify docking: The truck backs up to the dock. The camera checks its position, the wheel chock and the dock leveler. 2) Release loading: Loading is released once the conditions are met. The camera keeps watching truck movement and the dock edge while loading continues. 3) Alert when a condition fails: If the chock is missing or the truck moves, the AXION of the operator heading into the trailer vibrates and gives a voice alert. 4) Record the event: The event is recorded with a short video. The dock, the failed condition and the closing details are kept in one record.

Components used: fixed cameras, TIM INSPECT software, AXION and dock light and door integration. The conditions verified by the camera, the alert to the operator and the event record come together in one workflow. Where needed, it connects to the dock light and door control. Cameras already installed for shipment verification can also serve this scenario.

No. The system does not stop the truck or the forklift; when a condition fails it alerts the operator through AXION and records the event. Where needed, it connects to the dock light and door control; the scope of that integration is planned around the equipment on site.

Full docking of the truck, the wheel chock being in place, the position of the dock leveler, truck movement during loading and pedestrians at the dock edge are within the scope of this scenario. The scope is finalized according to the camera view at the dock.

Sites that already have cameras at the shipment door may not need extra cameras; dock safety can be added to the same cameras as an additional feature. Whether the camera angle covers the chock area and the dock leveler is reviewed together before installation.

The system monitors zones and behavior, not who the person is. Images are filtered and only the event moment is stored. Privacy is designed in from the start in line with KVKK and GDPR requirements.

This page describes a solution scenario; it does not include proven result figures. Before a pilot starts we define the metrics to track together with you, and at the end of the pilot we evaluate against those metrics.

YOUR SITE

Define safety conditions for your loading docks.

Let’s review your dock layout, camera views and operator workflow together, and agree up front which docks the pilot will cover and which metrics it will track.

Request a solution discussioninfo@threadinmotion.com
Chat on WhatsApp WhatsApp'tan yazın