Get a demo
Dial pressure gauge on a pipe line

FACILITY MONITORING · GAUGE READING

Read the gauge by camera, keep the value on record.

Read analog gauges, meters and level indicators with AXION or a fixed camera. Each value is matched to its equipment and recorded with its photo; when it is out of limit, the right person is alerted through AXION.

Discuss facility monitoring
Move the lens to see what the camera sees

Trusted by the world’s leading companies.

Sürat KargoÇimsa
Brisa
Togg
Eti
Arçelik
Yusen Logistics
CEVA Logistics
Aramex
Kühne + Nagel
CarrefourMercedes-Benz
Coca-Cola
Toyota
Renault
Honda
Ford
Stellantis
BSH
Daikin
DiageoLactalis
MANN+HUMMEL
Viessmann
Sika
Read
Needle, meter and level values
Alert
Flag out-of-limit values at once
Record
Photo-backed values and trends

THE NEED ON THE FLOOR

Record the value with its photo, not on a paper form.

In many plants, gauges on older equipment are still read on rounds and written onto a form by hand. Readings can be misread or mistyped, and a value that crosses its limit may go unnoticed until the next round. TIM INSPECT reads the gauge from the camera image and records the value against its equipment.

  • 01

    Read the value from the camera

    The worker holds AXION up to the gauge and the value is read from the image. Dial gauges, numeric meters, sight glasses and valve positions are within the scope of this scenario.

  • 02

    Flag out-of-limit values at once

    If the reading is outside the defined limit, AXION vibrates and alerts. For gauges watched by a fixed camera, the notification goes to the maintenance lead.

  • 03

    Follow the trend on record

    Every value is stored with its equipment and its photo. Review how values change over time for each piece of equipment.

EXPLORE THE SITUATION

What happens when a reading has a problem?

Pick one of three situations. The reading, the alert that goes out and the resulting record change together with your choice.

Pressure gauge needle between 3 and 4 bar
Gauge ✓
Needle · 3.2 bar
PG-104 · Feed line
  • Reading3.2 bar
  • Lower limit4.0 bar
  • Upper limit6.0 bar
AXION camera · round
SituationOut-of-limit value

During a round, the worker holds AXION up to a pressure gauge. The needle shows 3.2 bar; the lower limit for this equipment is 4.0 bar.

Response on the floor

As soon as the value is read, AXION vibrates and shows the out-of-limit value on screen. The worker learns about it at the gauge, before the round ends.

System decision

The value is recorded with its photo and equipment details; the out-of-limit reading is flagged separately.

Reading checks
Gauge foundDone
Value readDone
Equipment matchedDone
Limit checkOut of limit
4Checks
3Done
1Open
AXION alert
AXION · Maintenance lead · belt
3.2Out of limit on a round
Maintenance lead · belt
AXION · Worker · hand
3.2Out of limit on a round
Worker · hand

Vibration and screen: “PG-104 out of limit. Reading 3.2 bar.”

Alert open · value out of limit

HOW IT WORKS

Scan. Match. Alert when out of limit.

AXION
0/3Pressure round
Round · Boiler room
  • PG-104Next
  • PG-118Waiting
  • PG-121Waiting
Round list
Pressure gauge with its dial and needle marked
Gauge
Needle
Reading
  • EquipmentPG-104
  • Value3.2 bar
  • PhotoOn record
Reading with AXION
Worker · hand
!Out of limit · 3.2 bar
Worker · hand
Maintenance lead · belt
!Line 3 out of limit
Maintenance lead · belt
Out-of-limit alert
Three line gauges watched by a fixed camera
Line 1 gauge
Line 2 gauge
Line 3 gauge
Continuous monitoring record
  • TrendPer equipment
Continuous monitoring
01 / 04

Receive the round list

The list of gauges to read arrives on AXION. The worker follows on the device which gauges are part of the round.

SYSTEM, RECORD AND INTEGRATION

One workflow from reading to trend record.

The image from AXION or a fixed camera, the value read from it and the alert come together in one record. Values can be passed to the maintenance management system and to energy monitoring; the integration scope is planned around the systems on site.

Three line gauges side by side
01 / 04

Gauge image

Captured by the AXION camera on rounds and by fixed cameras at critical points.

  • SourceAXION or fixed camera
  • ScopeNeedle · meter · level · valve
    Components
  • AXION
  • Fixed cameras
  • TIM INSPECT software
  • Maintenance management system
  • Energy monitoring
  • Photo-backed values

    The record holds the image the reading was taken from, not just the number.

  • Rounds and continuous watch

    Read round gauges with AXION and critical gauges with fixed cameras.

  • Trend per equipment

    Follow how values change over time for each piece of equipment.

Review in one record which gauge a value came from, when it was read and the photo behind it. See out-of-limit readings and trends per equipment, so maintenance decisions rest on a photographed value instead of one written on a form.

SOLUTION FILM

The camera reads the value. AXION flags what is out of limit.

English narration · horizontal 16:9

TIM INSPECT · EXPLORE SOLUTIONS

One platform. 35 applications.

Discover the next opportunity on your floor. Choose a solution area or industry and explore each application visually.

35 solutions
Facility monitoring

Maintenance Rounds

Follow inspection points step by step and document findings with photographs and voice.

Manufacturing · Energy & facilities
Facility monitoring

Unauthorized Entry

Monitor designated-area entry and tailgating and notify the security team.

Manufacturing · Logistics & warehousing · Retail & e-commerce
Facility monitoring

Environmental Monitoring

Monitor visible emissions, dust and waste-sorting conditions through camera feeds.

Manufacturing · Energy & facilities
Verification & quality

Shipment & Crate Verification

Count passing crates, read their labels and match the load against the shipment list.

Automotive · Logistics & warehousing
Verification & quality

Returned Product Inspection

Identify returned products and record visual checks of damage, dates and product information.

Food & beverage · Retail & e-commerce · Logistics & warehousing
Verification & quality

Voice-Guided Final Inspection

Complete hands-free inspection steps and document findings with voice and photographs.

Automotive · Manufacturing
Verification & quality

Assembly Part Verification

Check parts, labels and surfaces during assembly and send the result to production systems.

Automotive · Manufacturing
Verification & quality

Cargo Sortation & Pallet Verification

Verify outgoing cargo by checking shipping labels and pallet contents together.

Logistics & warehousing · Aviation
Verification & quality

Metal Part & Label Verification

Match stamped metal-part numbers with crate labels to verify product identity.

Automotive · Manufacturing
Verification & quality

Quick-Connect Verification

Visually check that assembly quick-connects are fully seated and record the result.

Automotive · Manufacturing
Verification & quality

Vehicle Label Verification

Read vehicle-specific labels with OCR and compare them with expected production data.

Automotive · Manufacturing
Verification & quality

Component Assembly Inspection

Visually verify the assembly of components such as retaining rings, washers and plugs.

Automotive · Manufacturing
Verification & quality

Product & Carton Verification

Combine product, plug, label and carton-content checks before shipment.

Automotive · Manufacturing · Logistics & warehousing
Workplace safety

Forklift–Pedestrian Safety

Analyze risky encounters from camera feeds and alert the people involved through AXION.

Manufacturing · Logistics & warehousing
Workplace safety

Restricted-Zone Detection

Detect entry into hazardous areas and alert the worker and responsible team.

Manufacturing · Construction
Workplace safety

PPE Detection

Check the use of helmets, vests and other protective equipment in working areas.

Manufacturing · Construction · Logistics & warehousing
Workplace safety

Fire & Smoke Early Warning

Evaluate visible flame and smoke signs in camera feeds and notify the relevant team.

Manufacturing · Logistics & warehousing · Energy & facilities
Workplace safety

Spill & Leak Detection

Detect unexpected liquid accumulation and leaks, and notify teams with location information.

Manufacturing · Food & beverage · Energy & facilities
Workplace safety

Fallen or Motionless Person Detection

Detect falls or prolonged inactivity to support the assistance workflow.

Manufacturing · Logistics & warehousing · Energy & facilities
Workplace safety

Ergonomics & Posture Analysis

Analyze lifting, bending and reaching movements to make risky postures visible.

Manufacturing · Logistics & warehousing
Workplace safety

Working-at-Height Safety

Use visual checks to assess harness attachment, scaffolding and ladder use.

Construction · Energy & facilities · Manufacturing
Workplace safety

Lockout/Tagout Verification

Verify isolation steps with photographs to manage checks before maintenance.

Manufacturing · Energy & facilities
Workplace safety

Emergency Exit & Route Monitoring

Detect obstructions blocking emergency exits and access routes through camera feeds.

Manufacturing · Logistics & warehousing · Retail & e-commerce
Workplace safety

Loading Dock Safety

Check truck position, wheel chocks and dock conditions to flag risky loading situations.

Logistics & warehousing · Manufacturing
Operational efficiency

Assembly Sequence Verification

Monitor the defined assembly sequence and flag missed or out-of-order steps.

Automotive · Manufacturing
Operational efficiency

Cycle Time & Microstops

Measure station cycles and brief stops from video to reveal deviations in workflow.

Automotive · Manufacturing
Operational efficiency

Machine Utilization

Assess running and waiting periods visually and notify the relevant team of stops.

Manufacturing · Automotive
Operational efficiency

Dock & Door Monitoring

Track vehicle arrivals, door use and loading progress in one workflow.

Logistics & warehousing · Manufacturing
Operational efficiency

Four-Side Pallet Scanning

Read labels across pallet faces during a pass and match them against the order list.

Logistics & warehousing · Retail & e-commerce · Food & beverage
Operational efficiency

Dimensioning

Check carton and pallet dimensions with vision and laser measurement and create a record.

Logistics & warehousing · Retail & e-commerce
Operational efficiency

Damage Detection

Document carton, pallet and container damage with photographs at entry and exit points.

Logistics & warehousing · Retail & e-commerce · Manufacturing
Operational efficiency

Inventory Counting

Read shelf and pallet labels to reveal empty locations and placement mismatches.

Logistics & warehousing · Retail & e-commerce · Manufacturing
Operational efficiency

License Plate & Container OCR

Read vehicle and container numbers and match them with appointment and shipment records.

Logistics & warehousing · Manufacturing
Operational efficiency

Conveyor Jam Detection

Detect conveyor build-ups and jams and notify the person who can respond.

Logistics & warehousing · Manufacturing · Food & beverage

FAQ

Questions, answered

Gauge & Meter Reading is a facility monitoring solution on Thread In Motion’s TIM INSPECT platform that reads analog gauges, meters and level indicators with AXION or fixed cameras. Values are recorded with photos; when one is out of limit, the worker or maintenance lead is alerted on AXION.

With TIM INSPECT, Gauge & Meter Reading works in four steps: 1) Receive the round list: The list of gauges to read arrives on AXION. The worker follows on the device which gauges are part of the round. 2) Hold AXION up to the gauge: The value is read from the image, matched to its equipment through the gauge tag and recorded with its photo. 3) Alert when out of limit: If the value is outside the defined limit, AXION vibrates and alerts. For continuously watched gauges, the maintenance lead is notified. 4) Watch critical gauges continuously: Critical gauges are watched around the clock by fixed cameras. Values are stored per equipment and reviewed as a trend.

Components used: AXION, fixed cameras, TIM INSPECT software, maintenance management system and energy monitoring. The image from AXION or a fixed camera, the value read from it and the alert come together in one record. Values can be passed to the maintenance management system and to energy monitoring; the integration scope is planned around the systems on site.

Dial gauges, numeric meters, sight glasses and valve positions are within the scope of this scenario. The gauge tag is read as well, to establish which equipment the value belongs to. The scope is confirmed in the pilot based on the gauge types on site.

Yes. Fogged, dirty or reflective glass lowers reading accuracy. Our experience with capturing images on shiny surfaces helps here; camera angle and lighting are assessed gauge by gauge during setup.

Both can be used together. On a round, the worker reads by holding AXION up to the gauge. Critical gauges are watched continuously by fixed cameras; when a limit is exceeded, the maintenance lead is notified on AXION.

Readings can be passed to the maintenance management system and to energy monitoring. The trend of values over time is tracked per equipment. The integration scope is planned around the systems used on site.

If a person or confidential information is visible in a photo, it is filtered. The retention period is agreed together with you. The setup is designed in line with KVKK and GDPR requirements.

YOUR SITE

Define the reading scope for your gauges.

Let’s review your round lists, gauge types and limit values together, and define up front the three metrics to measure at the end of the pilot.

Request a solution discussioninfo@threadinmotion.com
Chat on WhatsApp WhatsApp'tan yazın