
FACILITY MONITORING · GAUGE READING
Read the gauge by camera, keep the value on record.
Read analog gauges, meters and level indicators with AXION or a fixed camera. Each value is matched to its equipment and recorded with its photo; when it is out of limit, the right person is alerted through AXION.
Trusted by the world’s leading companies.
THE NEED ON THE FLOOR
Record the value with its photo, not on a paper form.
In many plants, gauges on older equipment are still read on rounds and written onto a form by hand. Readings can be misread or mistyped, and a value that crosses its limit may go unnoticed until the next round. TIM INSPECT reads the gauge from the camera image and records the value against its equipment.
- 01
Read the value from the camera
The worker holds AXION up to the gauge and the value is read from the image. Dial gauges, numeric meters, sight glasses and valve positions are within the scope of this scenario.
- 02
Flag out-of-limit values at once
If the reading is outside the defined limit, AXION vibrates and alerts. For gauges watched by a fixed camera, the notification goes to the maintenance lead.
- 03
Follow the trend on record
Every value is stored with its equipment and its photo. Review how values change over time for each piece of equipment.
EXPLORE THE SITUATION
What happens when a reading has a problem?
Pick one of three situations. The reading, the alert that goes out and the resulting record change together with your choice.

PG-104 · Feed line
- Reading3.2 bar
- Lower limit4.0 bar
- Upper limit6.0 bar
During a round, the worker holds AXION up to a pressure gauge. The needle shows 3.2 bar; the lower limit for this equipment is 4.0 bar.
As soon as the value is read, AXION vibrates and shows the out-of-limit value on screen. The worker learns about it at the gauge, before the round ends.
The value is recorded with its photo and equipment details; the out-of-limit reading is flagged separately.
Gauge foundDoneValue readDoneEquipment matchedDoneLimit checkOut of limit

Vibration and screen: “PG-104 out of limit. Reading 3.2 bar.”
HOW IT WORKS
Scan. Match. Alert when out of limit.

Round · Boiler room
- PG-104Next
- PG-118Waiting
- PG-121Waiting

Reading
- EquipmentPG-104
- Value3.2 bar
- PhotoOn record



Continuous monitoring record
- TrendPer equipment
Receive the round list
The list of gauges to read arrives on AXION. The worker follows on the device which gauges are part of the round.
SYSTEM, RECORD AND INTEGRATION
One workflow from reading to trend record.
The image from AXION or a fixed camera, the value read from it and the alert come together in one record. Values can be passed to the maintenance management system and to energy monitoring; the integration scope is planned around the systems on site.

Gauge image
Captured by the AXION camera on rounds and by fixed cameras at critical points.
- SourceAXION or fixed camera
- ScopeNeedle · meter · level · valve
- Components
- AXION
- Fixed cameras
- TIM INSPECT software
- Maintenance management system
- Energy monitoring
Photo-backed values
The record holds the image the reading was taken from, not just the number.
Rounds and continuous watch
Read round gauges with AXION and critical gauges with fixed cameras.
Trend per equipment
Follow how values change over time for each piece of equipment.
Review in one record which gauge a value came from, when it was read and the photo behind it. See out-of-limit readings and trends per equipment, so maintenance decisions rest on a photographed value instead of one written on a form.
SOLUTION FILM
The camera reads the value. AXION flags what is out of limit.

TIM INSPECT · EXPLORE SOLUTIONS
One platform. 35 applications.
Discover the next opportunity on your floor. Choose a solution area or industry and explore each application visually.
Facility monitoringMaintenance Rounds
Follow inspection points step by step and document findings with photographs and voice.
Manufacturing · Energy & facilities
Facility monitoringUnauthorized Entry
Monitor designated-area entry and tailgating and notify the security team.
Manufacturing · Logistics & warehousing · Retail & e-commerce
Facility monitoringEnvironmental Monitoring
Monitor visible emissions, dust and waste-sorting conditions through camera feeds.
Manufacturing · Energy & facilities
Verification & qualityShipment & Crate Verification
Count passing crates, read their labels and match the load against the shipment list.
Automotive · Logistics & warehousing
Verification & qualityReturned Product Inspection
Identify returned products and record visual checks of damage, dates and product information.
Food & beverage · Retail & e-commerce · Logistics & warehousing
Verification & qualityVoice-Guided Final Inspection
Complete hands-free inspection steps and document findings with voice and photographs.
Automotive · Manufacturing
Verification & qualityAssembly Part Verification
Check parts, labels and surfaces during assembly and send the result to production systems.
Automotive · Manufacturing
Verification & qualityCargo Sortation & Pallet Verification
Verify outgoing cargo by checking shipping labels and pallet contents together.
Logistics & warehousing · Aviation
Verification & qualityMetal Part & Label Verification
Match stamped metal-part numbers with crate labels to verify product identity.
Automotive · Manufacturing
Verification & qualityQuick-Connect Verification
Visually check that assembly quick-connects are fully seated and record the result.
Automotive · Manufacturing
Verification & qualityVehicle Label Verification
Read vehicle-specific labels with OCR and compare them with expected production data.
Automotive · Manufacturing
Verification & qualityComponent Assembly Inspection
Visually verify the assembly of components such as retaining rings, washers and plugs.
Automotive · Manufacturing
Verification & qualityProduct & Carton Verification
Combine product, plug, label and carton-content checks before shipment.
Automotive · Manufacturing · Logistics & warehousing
Workplace safetyForklift–Pedestrian Safety
Analyze risky encounters from camera feeds and alert the people involved through AXION.
Manufacturing · Logistics & warehousing
Workplace safetyRestricted-Zone Detection
Detect entry into hazardous areas and alert the worker and responsible team.
Manufacturing · Construction
Workplace safetyPPE Detection
Check the use of helmets, vests and other protective equipment in working areas.
Manufacturing · Construction · Logistics & warehousing
Workplace safetyFire & Smoke Early Warning
Evaluate visible flame and smoke signs in camera feeds and notify the relevant team.
Manufacturing · Logistics & warehousing · Energy & facilities
Workplace safetySpill & Leak Detection
Detect unexpected liquid accumulation and leaks, and notify teams with location information.
Manufacturing · Food & beverage · Energy & facilities
Workplace safetyFallen or Motionless Person Detection
Detect falls or prolonged inactivity to support the assistance workflow.
Manufacturing · Logistics & warehousing · Energy & facilities
Workplace safetyErgonomics & Posture Analysis
Analyze lifting, bending and reaching movements to make risky postures visible.
Manufacturing · Logistics & warehousing
Workplace safetyWorking-at-Height Safety
Use visual checks to assess harness attachment, scaffolding and ladder use.
Construction · Energy & facilities · Manufacturing
Workplace safetyLockout/Tagout Verification
Verify isolation steps with photographs to manage checks before maintenance.
Manufacturing · Energy & facilities
Workplace safetyEmergency Exit & Route Monitoring
Detect obstructions blocking emergency exits and access routes through camera feeds.
Manufacturing · Logistics & warehousing · Retail & e-commerce
Workplace safetyLoading Dock Safety
Check truck position, wheel chocks and dock conditions to flag risky loading situations.
Logistics & warehousing · Manufacturing
Operational efficiencyAssembly Sequence Verification
Monitor the defined assembly sequence and flag missed or out-of-order steps.
Automotive · Manufacturing
Operational efficiencyCycle Time & Microstops
Measure station cycles and brief stops from video to reveal deviations in workflow.
Automotive · Manufacturing
Operational efficiencyMachine Utilization
Assess running and waiting periods visually and notify the relevant team of stops.
Manufacturing · Automotive
Operational efficiencyDock & Door Monitoring
Track vehicle arrivals, door use and loading progress in one workflow.
Logistics & warehousing · Manufacturing
Operational efficiencyFour-Side Pallet Scanning
Read labels across pallet faces during a pass and match them against the order list.
Logistics & warehousing · Retail & e-commerce · Food & beverage
Operational efficiencyDimensioning
Check carton and pallet dimensions with vision and laser measurement and create a record.
Logistics & warehousing · Retail & e-commerce
Operational efficiencyDamage Detection
Document carton, pallet and container damage with photographs at entry and exit points.
Logistics & warehousing · Retail & e-commerce · Manufacturing
Operational efficiencyInventory Counting
Read shelf and pallet labels to reveal empty locations and placement mismatches.
Logistics & warehousing · Retail & e-commerce · Manufacturing
Operational efficiencyLicense Plate & Container OCR
Read vehicle and container numbers and match them with appointment and shipment records.
Logistics & warehousing · Manufacturing
Operational efficiencyConveyor Jam Detection
Detect conveyor build-ups and jams and notify the person who can respond.
Logistics & warehousing · Manufacturing · Food & beverageFAQ
Questions, answered
Gauge & Meter Reading is a facility monitoring solution on Thread In Motion’s TIM INSPECT platform that reads analog gauges, meters and level indicators with AXION or fixed cameras. Values are recorded with photos; when one is out of limit, the worker or maintenance lead is alerted on AXION.
With TIM INSPECT, Gauge & Meter Reading works in four steps: 1) Receive the round list: The list of gauges to read arrives on AXION. The worker follows on the device which gauges are part of the round. 2) Hold AXION up to the gauge: The value is read from the image, matched to its equipment through the gauge tag and recorded with its photo. 3) Alert when out of limit: If the value is outside the defined limit, AXION vibrates and alerts. For continuously watched gauges, the maintenance lead is notified. 4) Watch critical gauges continuously: Critical gauges are watched around the clock by fixed cameras. Values are stored per equipment and reviewed as a trend.
Components used: AXION, fixed cameras, TIM INSPECT software, maintenance management system and energy monitoring. The image from AXION or a fixed camera, the value read from it and the alert come together in one record. Values can be passed to the maintenance management system and to energy monitoring; the integration scope is planned around the systems on site.
Dial gauges, numeric meters, sight glasses and valve positions are within the scope of this scenario. The gauge tag is read as well, to establish which equipment the value belongs to. The scope is confirmed in the pilot based on the gauge types on site.
Yes. Fogged, dirty or reflective glass lowers reading accuracy. Our experience with capturing images on shiny surfaces helps here; camera angle and lighting are assessed gauge by gauge during setup.
Both can be used together. On a round, the worker reads by holding AXION up to the gauge. Critical gauges are watched continuously by fixed cameras; when a limit is exceeded, the maintenance lead is notified on AXION.
Readings can be passed to the maintenance management system and to energy monitoring. The trend of values over time is tracked per equipment. The integration scope is planned around the systems used on site.
If a person or confidential information is visible in a photo, it is filtered. The retention period is agreed together with you. The setup is designed in line with KVKK and GDPR requirements.

YOUR SITE
Define the reading scope for your gauges.
Let’s review your round lists, gauge types and limit values together, and define up front the three metrics to measure at the end of the pilot.
























