Get a demo

OPERATIONAL EFFICIENCY · DAMAGE DETECTION

Document damage before it leaves the gate.

Detect damage on cartons, pallets and containers on camera at shipping and receiving points. Alert the operator carrying the damaged load through AXION, and record a photo of the damage with its time and location.

Discuss damage detection

Trusted by the world’s leading companies.

Sürat KargoÇimsa
Brisa
Togg
Eti
Arçelik
Yusen Logistics
CEVA Logistics
Aramex
Kühne + Nagel
CarrefourMercedes-Benz
Coca-Cola
Toyota
Renault
Honda
Ford
Stellantis
BSH
Daikin
DiageoLactalis
MANN+HUMMEL
Viessmann
Sika
Detect
Carton, pallet and container damage
Alert
The operator carrying the load
Document
Photo, time and location

THE NEED ON THE FLOOR

Show on record where the damage occurred.

When nobody can tell where damage occurred, responsibility is disputed, and damaged goods are often noticed only after they reach the customer. Manual checks cannot cover every carton either. TIM INSPECT checks the load on camera at exit and entry points and documents damage on the spot.

  • 01

    Check every load as it passes

    Fixed cameras at shipping and receiving points assess the passing load: crushed, torn or wet cartons, broken pallets, loose stretch film, leaning stacks.

  • 02

    Show the operator where the damage is

    When a damaged load is detected, the AXION of the operator carrying it vibrates and shows where the damage is. The operator sets the load aside or approves it.

  • 03

    Attach the evidence to the document

    The damage photo is recorded with its time and location and attached to the shipping or receiving document. It serves as evidence for the carrier and the insurer.

EXPLORE THE SITUATION

What happens when a damaged load passes?

Choose a situation to see what the camera marks, how the operator is alerted and how the damage record closes.

A pallet of nine cartons on a roller conveyor; the middle carton is torn and crushed at one corner
Torn, crushed carton
Damage detection
  • FindingTorn, crushed
  • LocationMiddle carton
  • DecisionSet aside
Shipping point camera
SituationDamaged load

On a pallet arriving at the shipping point, the middle carton is torn and crushed at one corner.

Response on the floor

The camera marks the damage. The AXION of the operator carrying the load vibrates and shows where it is; the operator sets the carton aside.

System decision

The damage is recorded with its photo before the shipment leaves the gate and attached to the shipping document.

Load check
Carton surfaceDamaged
Corners and edgesDamaged
Stack alignmentNo damage
3Checks
1No damage
2Open
AXION alert
AXION · Operator · belt
!Torn carton
Operator · belt
AXION · Operator · hand
!Torn carton
Operator · hand

Vibration and screen: “Damage · middle row, middle carton. Set the carton aside.”

Alert open · damaged carton not set aside

HOW IT WORKS

Detect on passing. Record with a photo.

Shipping point 2
  • ShipmentSVK-3120
  • CheckOn passing
Checkpoint
The torn, crushed carton on the pallet is marked in the image
Torn, crushed carton
Damage detection
  • Carton surfaceTear
  • Corners and edgesCrushed
  • StackNo damage
Damage detection
AXION
!Damage · mid row
Alert to the operator
The close-up of the damaged carton stored in the record
Damage record
  • Time14:32
  • LocationShipping point 2
  • DocumentSVK-3120
  • PhotoAttached
Damage record
01 / 04

Move the load past the checkpoint

Fixed cameras at shipping and receiving points capture the carton, pallet or container as it passes.

SYSTEM AND RECORD

One damage record, from detection to document.

The camera’s detection, the alert to the operator and the operator’s decision come together in one record. The record is attached to the shipping or receiving document and serves as evidence for the carrier and the insurer.

Pallet arriving at the checkpoint on the conveyor
01 / 04

Passing view

Load images from cameras at shipping and receiving points.

  • SourceFixed cameras
  • PointShipping and receiving
    Components
  • Fixed cameras
  • TIM INSPECT software
  • AXION
  • Shipping and receiving document link
  • Checks at exit and entry

    Document damage at both shipping and receiving points.

  • You define the limit

    Set your own criteria for which damage is unacceptable.

  • Records that serve as evidence

    Store the photo with its time and location.

Review in one record, with its photo, where and when a damage was detected and what the operator decided. The damage is documented as the load passes the gate, not when a complaint arrives.

SOLUTION FILM

The camera marks the damage. AXION shows the operator where it is.

English narration · horizontal 16:9

TIM INSPECT · EXPLORE SOLUTIONS

One platform. 35 applications.

Discover the next opportunity on your floor. Choose a solution area or industry and explore each application visually.

35 solutions
Operational efficiency

Assembly Sequence Verification

Monitor the defined assembly sequence and flag missed or out-of-order steps.

Automotive · Manufacturing
Operational efficiency

Cycle Time & Microstops

Measure station cycles and brief stops from video to reveal deviations in workflow.

Automotive · Manufacturing
Operational efficiency

Machine Utilization

Assess running and waiting periods visually and notify the relevant team of stops.

Manufacturing · Automotive
Operational efficiency

Dock & Door Monitoring

Track vehicle arrivals, door use and loading progress in one workflow.

Logistics & warehousing · Manufacturing
Operational efficiency

Four-Side Pallet Scanning

Read labels across pallet faces during a pass and match them against the order list.

Logistics & warehousing · Retail & e-commerce · Food & beverage
Operational efficiency

Dimensioning

Check carton and pallet dimensions with vision and laser measurement and create a record.

Logistics & warehousing · Retail & e-commerce
Operational efficiency

Inventory Counting

Read shelf and pallet labels to reveal empty locations and placement mismatches.

Logistics & warehousing · Retail & e-commerce · Manufacturing
Operational efficiency

License Plate & Container OCR

Read vehicle and container numbers and match them with appointment and shipment records.

Logistics & warehousing · Manufacturing
Operational efficiency

Conveyor Jam Detection

Detect conveyor build-ups and jams and notify the person who can respond.

Logistics & warehousing · Manufacturing · Food & beverage
Verification & quality

Shipment & Crate Verification

Count passing crates, read their labels and match the load against the shipment list.

Automotive · Logistics & warehousing
Verification & quality

Returned Product Inspection

Identify returned products and record visual checks of damage, dates and product information.

Food & beverage · Retail & e-commerce · Logistics & warehousing
Verification & quality

Voice-Guided Final Inspection

Complete hands-free inspection steps and document findings with voice and photographs.

Automotive · Manufacturing
Verification & quality

Assembly Part Verification

Check parts, labels and surfaces during assembly and send the result to production systems.

Automotive · Manufacturing
Verification & quality

Cargo Sortation & Pallet Verification

Verify outgoing cargo by checking shipping labels and pallet contents together.

Logistics & warehousing · Aviation
Verification & quality

Metal Part & Label Verification

Match stamped metal-part numbers with crate labels to verify product identity.

Automotive · Manufacturing
Verification & quality

Quick-Connect Verification

Visually check that assembly quick-connects are fully seated and record the result.

Automotive · Manufacturing
Verification & quality

Vehicle Label Verification

Read vehicle-specific labels with OCR and compare them with expected production data.

Automotive · Manufacturing
Verification & quality

Component Assembly Inspection

Visually verify the assembly of components such as retaining rings, washers and plugs.

Automotive · Manufacturing
Verification & quality

Product & Carton Verification

Combine product, plug, label and carton-content checks before shipment.

Automotive · Manufacturing · Logistics & warehousing
Workplace safety

Forklift–Pedestrian Safety

Analyze risky encounters from camera feeds and alert the people involved through AXION.

Manufacturing · Logistics & warehousing
Workplace safety

Restricted-Zone Detection

Detect entry into hazardous areas and alert the worker and responsible team.

Manufacturing · Construction
Workplace safety

PPE Detection

Check the use of helmets, vests and other protective equipment in working areas.

Manufacturing · Construction · Logistics & warehousing
Workplace safety

Fire & Smoke Early Warning

Evaluate visible flame and smoke signs in camera feeds and notify the relevant team.

Manufacturing · Logistics & warehousing · Energy & facilities
Workplace safety

Spill & Leak Detection

Detect unexpected liquid accumulation and leaks, and notify teams with location information.

Manufacturing · Food & beverage · Energy & facilities
Workplace safety

Fallen or Motionless Person Detection

Detect falls or prolonged inactivity to support the assistance workflow.

Manufacturing · Logistics & warehousing · Energy & facilities
Workplace safety

Ergonomics & Posture Analysis

Analyze lifting, bending and reaching movements to make risky postures visible.

Manufacturing · Logistics & warehousing
Workplace safety

Working-at-Height Safety

Use visual checks to assess harness attachment, scaffolding and ladder use.

Construction · Energy & facilities · Manufacturing
Workplace safety

Lockout/Tagout Verification

Verify isolation steps with photographs to manage checks before maintenance.

Manufacturing · Energy & facilities
Workplace safety

Emergency Exit & Route Monitoring

Detect obstructions blocking emergency exits and access routes through camera feeds.

Manufacturing · Logistics & warehousing · Retail & e-commerce
Workplace safety

Loading Dock Safety

Check truck position, wheel chocks and dock conditions to flag risky loading situations.

Logistics & warehousing · Manufacturing
Facility monitoring

Gauge & Meter Reading

Read analog gauges from images, record values and notify teams of threshold exceptions.

Manufacturing · Energy & facilities
Facility monitoring

Maintenance Rounds

Follow inspection points step by step and document findings with photographs and voice.

Manufacturing · Energy & facilities
Facility monitoring

Unauthorized Entry

Monitor designated-area entry and tailgating and notify the security team.

Manufacturing · Logistics & warehousing · Retail & e-commerce
Facility monitoring

Environmental Monitoring

Monitor visible emissions, dust and waste-sorting conditions through camera feeds.

Manufacturing · Energy & facilities

FAQ

Questions, answered

Damage Detection is an operational efficiency solution on Thread In Motion’s TIM INSPECT platform that detects carton, pallet and container damage from fixed cameras at shipping and receiving points. The operator is alerted through AXION; a photo with time and location is attached to the shipping or receiving document.

With TIM INSPECT, Damage Detection works in four steps: 1) Move the load past the checkpoint: Fixed cameras at shipping and receiving points capture the carton, pallet or container as it passes. 2) Detect and mark the damage: TIM INSPECT marks crushed, torn or wet cartons, broken pallets, loose stretch film and leaning stacks in the image. 3) Alert the operator: The AXION of the operator carrying the load vibrates and shows where the damage is. The operator sets the load aside or approves it. 4) Record it with a photo: The damage photo is recorded with its time and location and attached to the shipping or receiving document.

Components used: fixed cameras, TIM INSPECT software, AXION and shipping and receiving document link. The camera’s detection, the alert to the operator and the operator’s decision come together in one record. The record is attached to the shipping or receiving document and serves as evidence for the carrier and the insurer.

This scenario covers crushed, torn and wet cartons, broken pallets, loose stretch film, dents or holes in containers and trailers, and leaning stacks. The scope is confirmed during setup, based on the camera view at the checkpoint and on your load types.

You do. You define with your own criteria which damage counts as unacceptable, and the system marks accordingly. When alerted, the operator sets the load aside or approves it, and the decision goes on record.

The damage photo is recorded with its time and location and attached to the shipping or receiving document. The record can serve as evidence for the carrier and the insurer.

The scenario assesses the load, not the person. Where people enter the field of view, privacy is designed in from the start: identity is not tracked, images are filtered and only the event moment is stored. Setup is planned in line with KVKK and GDPR requirements.

Together we define your checkpoints, your load types and what you count as unacceptable damage. The metrics to measure at the end of the pilot are set from the start, and results are assessed against them.

YOUR SITE

Let’s define your checkpoints together.

Let’s review your exit and entry points, load types and your definition of unacceptable damage together, then define the pilot scope and the results to measure from the start.

Request a solution discussioninfo@threadinmotion.com
Chat on WhatsApp WhatsApp'tan yazın