
AUTOMOTIVE · FINAL QUALITY INSPECTION
Run final inspection with both hands free.
Inspection steps come from your system to the VEGA-X smart glove. The glove announces the next point; the worker records any defect by speaking and takes a photo of it. Where image processing is needed, it runs on the same device, on the spot.
Trusted by the world’s leading companies.
Results from an automotive manufacturer’s final quality inspection point
Results for this deployment are based on the Thread In Motion project report.
THE NEED ON THE FLOOR
Make recording easier while you inspect.
In final quality inspection, many points on every vehicle are checked one by one. The worker walks around the vehicle, bends down and touches the parts, and at the same time needs to see what to check and record what is found. A hand-held tablet keeps one hand busy, and defects are typed in by hand.
- 01
Use both hands on the vehicle
The device sits on the hand. The worker carries no tablet and can touch, bend down and move parts freely.
- 02
Let the glove call the next point
Inspection steps come from the system. VEGA-X announces the next point by voice and shows the same question on its screen.
- 03
Record defects by speaking
The worker says the defect out loud; the speech is turned into text and saved to the system. A photo of the defect is added to the record.
EXPLORE THE SITUATION
How does the record progress when a defect is found?
Choose a situation to see what the glove asks, how the worker records the defect and how the record reaches the system.

Voice defect record
- StepIs the paint surface OK?
- AnswerNot OK
- Spoken“Scratch on the left rear door”
The glove asks about the next point: “Is the paint surface OK?” The worker sees a scratch on the left rear door.
The worker says “Not OK” and states the defect: “Scratch on the left rear door.” The glove takes a photo of the defect.
The system turns the speech into text and opens a defect record. The step stays open until the photo is attached and the record is sent.
WeldsCompletedFastening clipCompletedPaint surfaceDefect foundLabelsNext
VEGA-X screen and voice guidance: “Defect record opened for paint surface.”
HOW IT WORKS
Listen. Check. Say what you find.

Checklist
- RecordKYT-000482
- Inspection steps18
- SourceSystem

Step 3 / 18
- AnswerOK
- NextFastening clip

Voice defect record
- Spoken“Scratch on the left rear door”
- PhotoAttached

Get the checklist from the system
The inspection steps for that vehicle come from the system to the glove. The record is opened by scanning a barcode.
SYSTEM, RECORD AND INTEGRATION
One device from checklist to record.
The checklist and vehicle data come from your system and results are written back. Voice guidance, voice defect recording, photos and, where needed, image processing all run on the same glove.

Checklist
Inspection steps and vehicle data are taken from your system and sent to the glove.
- SourceThe system you use
- Record opened byBarcode scan
- Components
- VEGA-X smart glove
- TIM INSPECT software
- System integration
- Software platform
Both hands free
The worker carries no tablet and works on the vehicle with both hands.
No step is skipped
Inspection steps come from the system and the glove announces each one in order.
Image processing on the same device
Where needed, analysis runs on the spot on the image taken with the glove.
See every inspection in one record with its step, result and photo. Follow date, time and status in the record list and open the photos that were taken directly from the record.
APPLICATION FILM
The glove asks. The worker records by speaking.

TIM INSPECT · EXPLORE SOLUTIONS
One platform. 35 applications.
Discover the next opportunity on your floor. Choose a solution area or industry and explore each application visually.
Verification & qualityShipment & Crate Verification
Count passing crates, read their labels and match the load against the shipment list.
Automotive · Logistics & warehousing
Verification & qualityReturned Product Inspection
Identify returned products and record visual checks of damage, dates and product information.
Food & beverage · Retail & e-commerce · Logistics & warehousing
Verification & qualityAssembly Part Verification
Check parts, labels and surfaces during assembly and send the result to production systems.
Automotive · Manufacturing
Verification & qualityCargo Sortation & Pallet Verification
Verify outgoing cargo by checking shipping labels and pallet contents together.
Logistics & warehousing · Aviation
Verification & qualityMetal Part & Label Verification
Match stamped metal-part numbers with crate labels to verify product identity.
Automotive · Manufacturing
Verification & qualityQuick-Connect Verification
Visually check that assembly quick-connects are fully seated and record the result.
Automotive · Manufacturing
Verification & qualityVehicle Label Verification
Read vehicle-specific labels with OCR and compare them with expected production data.
Automotive · Manufacturing
Verification & qualityComponent Assembly Inspection
Visually verify the assembly of components such as retaining rings, washers and plugs.
Automotive · Manufacturing
Verification & qualityProduct & Carton Verification
Combine product, plug, label and carton-content checks before shipment.
Automotive · Manufacturing · Logistics & warehousing
Workplace safetyForklift–Pedestrian Safety
Analyze risky encounters from camera feeds and alert the people involved through AXION.
Manufacturing · Logistics & warehousing
Workplace safetyRestricted-Zone Detection
Detect entry into hazardous areas and alert the worker and responsible team.
Manufacturing · Construction
Workplace safetyPPE Detection
Check the use of helmets, vests and other protective equipment in working areas.
Manufacturing · Construction · Logistics & warehousing
Workplace safetyFire & Smoke Early Warning
Evaluate visible flame and smoke signs in camera feeds and notify the relevant team.
Manufacturing · Logistics & warehousing · Energy & facilities
Workplace safetySpill & Leak Detection
Detect unexpected liquid accumulation and leaks, and notify teams with location information.
Manufacturing · Food & beverage · Energy & facilities
Workplace safetyFallen or Motionless Person Detection
Detect falls or prolonged inactivity to support the assistance workflow.
Manufacturing · Logistics & warehousing · Energy & facilities
Workplace safetyErgonomics & Posture Analysis
Analyze lifting, bending and reaching movements to make risky postures visible.
Manufacturing · Logistics & warehousing
Workplace safetyWorking-at-Height Safety
Use visual checks to assess harness attachment, scaffolding and ladder use.
Construction · Energy & facilities · Manufacturing
Workplace safetyLockout/Tagout Verification
Verify isolation steps with photographs to manage checks before maintenance.
Manufacturing · Energy & facilities
Workplace safetyEmergency Exit & Route Monitoring
Detect obstructions blocking emergency exits and access routes through camera feeds.
Manufacturing · Logistics & warehousing · Retail & e-commerce
Workplace safetyLoading Dock Safety
Check truck position, wheel chocks and dock conditions to flag risky loading situations.
Logistics & warehousing · Manufacturing
Operational efficiencyAssembly Sequence Verification
Monitor the defined assembly sequence and flag missed or out-of-order steps.
Automotive · Manufacturing
Operational efficiencyCycle Time & Microstops
Measure station cycles and brief stops from video to reveal deviations in workflow.
Automotive · Manufacturing
Operational efficiencyMachine Utilization
Assess running and waiting periods visually and notify the relevant team of stops.
Manufacturing · Automotive
Operational efficiencyDock & Door Monitoring
Track vehicle arrivals, door use and loading progress in one workflow.
Logistics & warehousing · Manufacturing
Operational efficiencyFour-Side Pallet Scanning
Read labels across pallet faces during a pass and match them against the order list.
Logistics & warehousing · Retail & e-commerce · Food & beverage
Operational efficiencyDimensioning
Check carton and pallet dimensions with vision and laser measurement and create a record.
Logistics & warehousing · Retail & e-commerce
Operational efficiencyDamage Detection
Document carton, pallet and container damage with photographs at entry and exit points.
Logistics & warehousing · Retail & e-commerce · Manufacturing
Operational efficiencyInventory Counting
Read shelf and pallet labels to reveal empty locations and placement mismatches.
Logistics & warehousing · Retail & e-commerce · Manufacturing
Operational efficiencyLicense Plate & Container OCR
Read vehicle and container numbers and match them with appointment and shipment records.
Logistics & warehousing · Manufacturing
Operational efficiencyConveyor Jam Detection
Detect conveyor build-ups and jams and notify the person who can respond.
Logistics & warehousing · Manufacturing · Food & beverage
Facility monitoringGauge & Meter Reading
Read analog gauges from images, record values and notify teams of threshold exceptions.
Manufacturing · Energy & facilities
Facility monitoringMaintenance Rounds
Follow inspection points step by step and document findings with photographs and voice.
Manufacturing · Energy & facilities
Facility monitoringUnauthorized Entry
Monitor designated-area entry and tailgating and notify the security team.
Manufacturing · Logistics & warehousing · Retail & e-commerce
Facility monitoringEnvironmental Monitoring
Monitor visible emissions, dust and waste-sorting conditions through camera feeds.
Manufacturing · Energy & facilitiesFAQ
Questions, answered
Voice-Guided Final Inspection is a quality inspection solution on Thread In Motion’s TIM INSPECT platform that announces inspection steps through the VEGA-X smart glove and records defects by speech and photo. Both hands stay free; records are written to the system with photos and transcribed voice notes.
With TIM INSPECT, Voice-Guided Final Inspection works in four steps: 1) Get the checklist from the system: The inspection steps for that vehicle come from the system to the glove. The record is opened by scanning a barcode. 2) Inspect with voice guidance: VEGA-X announces the next point and shows it on its screen. The worker checks it with both hands, confirms if it is OK and moves on. 3) Say the defect, take the photo: When a defect is found, the worker says it out loud and the system turns it into text. The glove photographs the defect and adds it to the record. 4) Write the record to the system: When all steps are done, the record is written to the system together with its photos and transcribed voice notes.
Components used: VEGA-X smart glove, TIM INSPECT software, system integration and software platform. The checklist and vehicle data come from your system and results are written back. Voice guidance, voice defect recording, photos and, where needed, image processing all run on the same glove.
A tablet keeps one hand busy at all times and defects are typed in by hand. VEGA-X sits on the hand: both hands stay free, the glove announces the next check and defects are recorded by speaking. A photo of the defect is added to the record as well.
The checklist and vehicle data are taken from the systems you use, and results are written back to the same system. The record is opened by scanning a barcode. Which system to connect to is agreed together before installation.
In two places. Every point the worker finds defective is photographed and added to the record. If a checkpoint has its own image processing step defined, TIM INSPECT analyses the image taken with the glove on the spot.
The glove says the question out loud and shows it on its screen. If the point is OK, the worker confirms and moves on; if there is a defect, the worker says it out loud. The glove’s screen also offers OK, NOK, back and next options.
All records, photos and statuses are collected in a single software platform in the background. It provides summary counters, a record list with date and time, and access to the photos that were taken.

YOUR SITE
Let’s move your checklist onto the glove.
Let’s review your checkpoints, your defect recording flow and the system to connect to, then define the pilot scope and the results to measure from the start.
























