Get a demo

FACILITY MONITORING · UNAUTHORIZED ENTRY

One person swipes the card; the camera counts who walks in.

Spot unauthorized entry to protected areas, tailgating at doors and off-hours movement from camera feeds. The moment it happens, send the security guard a notification on AXION with the location and the image.

Discuss area security

Trusted by the world’s leading companies.

Sürat KargoÇimsa
Brisa
Togg
Eti
Arçelik
Yusen Logistics
CEVA Logistics
Aramex
Kühne + Nagel
CarrefourMercedes-Benz
Coca-Cola
Toyota
Renault
Honda
Ford
Stellantis
BSH
Daikin
DiageoLactalis
MANN+HUMMEL
Viessmann
Sika
Spot
Tailgating and off-hours movement
Alert
The guard, with location and image
Record
The event with a short clip

THE NEED ON THE FLOOR

Let the camera cover what a card door cannot see.

High-value stock areas and hazardous material stores are usually protected by card-access doors, but a card alone cannot prevent tailgating. Off-hours movement is typically searched for in recordings after the fact. TIM INSPECT watches the protected area by camera and reports a situation outside the rule the moment it happens.

  • 01

    Count who passes the door

    When more than one person passes on a single card swipe, the camera sees the difference. The count is matched with the card-access log.

  • 02

    Define the area and the hours

    Set the protected areas and the allowed hours. Doors left open, off-hours movement and unauthorized vehicle entry are assessed against these rules.

  • 03

    Alert the guard as it happens

    The security guard receives a notification on AXION with the location and the image. The event is recorded with a short clip.

EXPLORE THE SITUATION

What happens when an entry breaks the rule?

Pick one of three violations and follow what the camera sees, the notification that reaches the guard and the event record.

Two people passing through the open card-access door one after the other; the reader light is green
1 card swipe
1
2
Entrance B · card door
  • Card swipe1
  • People passing2
Door camera · Entrance B
SituationPeople count mismatch

One card is swiped at a card-access door; the camera counts more than one person passing during the same opening.

Response on the floor

The security guard receives a notification on AXION with the door location and the event image, and assesses the situation on site.

System decision

The number of swipes is matched with the number of people passing; the difference is written to the event record with its short clip.

Area rules
Card swipeMet
People countViolation
Door statusMet
Time windowMet
4Rules
3Met
1Violated
AXION alert
AXION · Security guard · belt
!Tailgating
Security guard · belt
AXION · Shift supervisor · hand
!Tailgating
Shift supervisor · hand

Notification: “Entrance B: 1 card swipe, 2 people passed.”

Event open · tailgating

HOW IT WORKS

Define. Spot. Alert the guard.

A closed storeroom door defined as a protected area, with the card reader beside it
Card reader
Rule · Storeroom door 2
  • DoorStays closed
  • Hours08:00–18:00
  • AccessBy card
Area and time rule
Two people passing through the open door marked in the image
Person
Person
Door count
  • People passing2
  • Card swipe1
Violation detection
Shift supervisor · hand
!Tailgating
Shift supervisor · hand
Security guard · belt
!Entrance B · 2 people
Security guard · belt
Alert to the guard
Event record · Entrance B
  • Short clipStored
  • Card logMatched
  • KeptEvent only
Event record
01 / 04

Define areas and hours

Protected areas, doors and allowed hours are set. Every assessment follows these rules.

SYSTEM, RECORD AND INTEGRATION

Bring the card log and the camera image into one event.

The area rule, the camera’s detection and the notification to the guard come together in one workflow. Once matching with the card-access system is in place, card swipes are compared with the number of people passing the door. The integration scope is planned around the access system on site.

Card-access door to a protected storeroom, with its card reader
01 / 04

Door and area view

Images from fixed cameras that see the protected doors and areas.

  • SourceFixed cameras
  • CoverageDoor · area · vehicle entry
    Components
  • Fixed cameras
  • TIM INSPECT software
  • AXION
  • Card-access system
  • People count at the door

    Compare card swipes with the number of people passing the door.

  • Alerts as it happens

    The guard learns about the event when it occurs, not from recordings later.

  • Privacy-aware monitoring

    No face recognition; zones and behaviour are monitored, not identity.

Review in one record, with its short clip, at which door or area an event took place, when it happened and how it was closed. Assess events together with the card-access log so your area rules rest on concrete records.

SOLUTION FILM

The camera spots the violation. AXION tells the guard.

English narration · horizontal 16:9

TIM INSPECT · EXPLORE SOLUTIONS

One platform. 35 applications.

Discover the next opportunity on your floor. Choose a solution area or industry and explore each application visually.

35 solutions
Facility monitoring

Gauge & Meter Reading

Read analog gauges from images, record values and notify teams of threshold exceptions.

Manufacturing · Energy & facilities
Facility monitoring

Maintenance Rounds

Follow inspection points step by step and document findings with photographs and voice.

Manufacturing · Energy & facilities
Facility monitoring

Environmental Monitoring

Monitor visible emissions, dust and waste-sorting conditions through camera feeds.

Manufacturing · Energy & facilities
Verification & quality

Shipment & Crate Verification

Count passing crates, read their labels and match the load against the shipment list.

Automotive · Logistics & warehousing
Verification & quality

Returned Product Inspection

Identify returned products and record visual checks of damage, dates and product information.

Food & beverage · Retail & e-commerce · Logistics & warehousing
Verification & quality

Voice-Guided Final Inspection

Complete hands-free inspection steps and document findings with voice and photographs.

Automotive · Manufacturing
Verification & quality

Assembly Part Verification

Check parts, labels and surfaces during assembly and send the result to production systems.

Automotive · Manufacturing
Verification & quality

Cargo Sortation & Pallet Verification

Verify outgoing cargo by checking shipping labels and pallet contents together.

Logistics & warehousing · Aviation
Verification & quality

Metal Part & Label Verification

Match stamped metal-part numbers with crate labels to verify product identity.

Automotive · Manufacturing
Verification & quality

Quick-Connect Verification

Visually check that assembly quick-connects are fully seated and record the result.

Automotive · Manufacturing
Verification & quality

Vehicle Label Verification

Read vehicle-specific labels with OCR and compare them with expected production data.

Automotive · Manufacturing
Verification & quality

Component Assembly Inspection

Visually verify the assembly of components such as retaining rings, washers and plugs.

Automotive · Manufacturing
Verification & quality

Product & Carton Verification

Combine product, plug, label and carton-content checks before shipment.

Automotive · Manufacturing · Logistics & warehousing
Workplace safety

Forklift–Pedestrian Safety

Analyze risky encounters from camera feeds and alert the people involved through AXION.

Manufacturing · Logistics & warehousing
Workplace safety

Restricted-Zone Detection

Detect entry into hazardous areas and alert the worker and responsible team.

Manufacturing · Construction
Workplace safety

PPE Detection

Check the use of helmets, vests and other protective equipment in working areas.

Manufacturing · Construction · Logistics & warehousing
Workplace safety

Fire & Smoke Early Warning

Evaluate visible flame and smoke signs in camera feeds and notify the relevant team.

Manufacturing · Logistics & warehousing · Energy & facilities
Workplace safety

Spill & Leak Detection

Detect unexpected liquid accumulation and leaks, and notify teams with location information.

Manufacturing · Food & beverage · Energy & facilities
Workplace safety

Fallen or Motionless Person Detection

Detect falls or prolonged inactivity to support the assistance workflow.

Manufacturing · Logistics & warehousing · Energy & facilities
Workplace safety

Ergonomics & Posture Analysis

Analyze lifting, bending and reaching movements to make risky postures visible.

Manufacturing · Logistics & warehousing
Workplace safety

Working-at-Height Safety

Use visual checks to assess harness attachment, scaffolding and ladder use.

Construction · Energy & facilities · Manufacturing
Workplace safety

Lockout/Tagout Verification

Verify isolation steps with photographs to manage checks before maintenance.

Manufacturing · Energy & facilities
Workplace safety

Emergency Exit & Route Monitoring

Detect obstructions blocking emergency exits and access routes through camera feeds.

Manufacturing · Logistics & warehousing · Retail & e-commerce
Workplace safety

Loading Dock Safety

Check truck position, wheel chocks and dock conditions to flag risky loading situations.

Logistics & warehousing · Manufacturing
Operational efficiency

Assembly Sequence Verification

Monitor the defined assembly sequence and flag missed or out-of-order steps.

Automotive · Manufacturing
Operational efficiency

Cycle Time & Microstops

Measure station cycles and brief stops from video to reveal deviations in workflow.

Automotive · Manufacturing
Operational efficiency

Machine Utilization

Assess running and waiting periods visually and notify the relevant team of stops.

Manufacturing · Automotive
Operational efficiency

Dock & Door Monitoring

Track vehicle arrivals, door use and loading progress in one workflow.

Logistics & warehousing · Manufacturing
Operational efficiency

Four-Side Pallet Scanning

Read labels across pallet faces during a pass and match them against the order list.

Logistics & warehousing · Retail & e-commerce · Food & beverage
Operational efficiency

Dimensioning

Check carton and pallet dimensions with vision and laser measurement and create a record.

Logistics & warehousing · Retail & e-commerce
Operational efficiency

Damage Detection

Document carton, pallet and container damage with photographs at entry and exit points.

Logistics & warehousing · Retail & e-commerce · Manufacturing
Operational efficiency

Inventory Counting

Read shelf and pallet labels to reveal empty locations and placement mismatches.

Logistics & warehousing · Retail & e-commerce · Manufacturing
Operational efficiency

License Plate & Container OCR

Read vehicle and container numbers and match them with appointment and shipment records.

Logistics & warehousing · Manufacturing
Operational efficiency

Conveyor Jam Detection

Detect conveyor build-ups and jams and notify the person who can respond.

Logistics & warehousing · Manufacturing · Food & beverage

FAQ

Questions, answered

Unauthorized Entry is an area security solution on Thread In Motion’s TIM INSPECT platform that spots unauthorized entry, tailgating and off-hours movement in protected areas from fixed camera feeds, without face recognition. The security guard gets an AXION alert with location and image, and a short clip is recorded.

With TIM INSPECT, Unauthorized Entry works in four steps: 1) Define areas and hours: Protected areas, doors and allowed hours are set. Every assessment follows these rules. 2) Spot the violation: Cameras detect tailgating, doors left open, off-hours movement and unauthorized vehicle entry. No face recognition is used. 3) Alert the security guard: As the event happens, the guard receives a notification on AXION with location and image, and assesses the situation on site. 4) Record the event with its clip: The event is recorded with a short clip and matched with the card-access log. Only the event moment is stored.

Components used: fixed cameras, TIM INSPECT software, AXION and card-access system. The area rule, the camera’s detection and the notification to the guard come together in one workflow. Once matching with the card-access system is in place, card swipes are compared with the number of people passing the door. The integration scope is planned around the access system on site.

No. No face recognition is used. The system monitors zones and behaviour, not identity: how many people pass a door, or at what time there is movement in an area. Images are filtered and only the event moment is stored. Privacy is designed in from the start in line with KVKK and GDPR requirements.

The camera counts the people passing through the door. When this is matched with the card-access system, it shows that more than one person passed on a single card swipe, and the security guard is notified.

More than one person passing on a single card swipe, a door left open that should be closed, off-hours movement in an area and unauthorized vehicle entry are within the scope of this scenario. The scope depends on the protected areas and the camera views.

No. This scenario is not designed to replace a security system or a security service; it is an additional capability on top of a TIM INSPECT setup already on site. It works by being matched with your card-access system.

In this scenario the system alerts and records; it does not lock a door by itself. As the event happens, the security guard is informed on AXION and assesses the situation on site.

YOUR SITE

Decide which doors and areas to monitor.

Let’s review your protected areas, allowed hours and card-access system together, then define the pilot scope and the three metrics to measure from the start.

Request a solution discussioninfo@threadinmotion.com
Chat on WhatsApp WhatsApp'tan yazın