Get a demo
Low-angle view of a vehicle body moving along the line

AUTOMOTIVE · FINAL QUALITY INSPECTION

Run final inspection with both hands free.

Inspection steps come from your system to the VEGA-X smart glove. The glove announces the next point; the worker records any defect by speaking and takes a photo of it. Where image processing is needed, it runs on the same device, on the spot.

Discuss final inspection
Move the lens to see the checkpoints

Trusted by the world’s leading companies.

Sürat KargoÇimsa
Brisa
Togg
Eti
Arçelik
Yusen Logistics
CEVA Logistics
Aramex
Kühne + Nagel
CarrefourMercedes-Benz
Coca-Cola
Toyota
Renault
Honda
Ford
Stellantis
BSH
Daikin
DiageoLactalis
MANN+HUMMEL
Viessmann
Sika

Results from an automotive manufacturer’s final quality inspection point

60%
Faster inspection
100%
Accuracy
2
Hands free; no tablet to carry

Results for this deployment are based on the Thread In Motion project report.

THE NEED ON THE FLOOR

Make recording easier while you inspect.

In final quality inspection, many points on every vehicle are checked one by one. The worker walks around the vehicle, bends down and touches the parts, and at the same time needs to see what to check and record what is found. A hand-held tablet keeps one hand busy, and defects are typed in by hand.

  • 01

    Use both hands on the vehicle

    The device sits on the hand. The worker carries no tablet and can touch, bend down and move parts freely.

  • 02

    Let the glove call the next point

    Inspection steps come from the system. VEGA-X announces the next point by voice and shows the same question on its screen.

  • 03

    Record defects by speaking

    The worker says the defect out loud; the speech is turned into text and saved to the system. A photo of the defect is added to the record.

EXPLORE THE SITUATION

How does the record progress when a defect is found?

Choose a situation to see what the glove asks, how the worker records the defect and how the record reaches the system.

A diagonal scratch on a painted vehicle surface
Scratch
Voice defect record
  • StepIs the paint surface OK?
  • AnswerNot OK
  • Spoken“Scratch on the left rear door”
VEGA-X photo · defect
SituationDefect found

The glove asks about the next point: “Is the paint surface OK?” The worker sees a scratch on the left rear door.

Response on the floor

The worker says “Not OK” and states the defect: “Scratch on the left rear door.” The glove takes a photo of the defect.

System decision

The system turns the speech into text and opens a defect record. The step stays open until the photo is attached and the record is sent.

Checklist for this vehicle
WeldsCompleted
Fastening clipCompleted
Paint surfaceDefect found
LabelsNext
4Steps
2Completed
1Open
VEGA-X feedback
VEGA-X · Operator · VEGA-X
NOKScratch in the paint
Operator · VEGA-X

VEGA-X screen and voice guidance: “Defect record opened for paint surface.”

Step open · defect record incomplete

HOW IT WORKS

Listen. Check. Say what you find.

Vehicle body arriving at the inspection point
Checklist
  • RecordKYT-000482
  • Inspection steps18
  • SourceSystem
Checklist
The next checkpoint at the front of the vehicle body
Are the welds OK?
Step 3 / 18
  • AnswerOK
  • NextFastening clip
Voice guidance
A scratch marked on the painted surface
Scratch
Voice defect record
  • Spoken“Scratch on the left rear door”
  • PhotoAttached
Voice defect record
VEGA-X
NOKPaint surface · left rear door
Record and notification
01 / 04

Get the checklist from the system

The inspection steps for that vehicle come from the system to the glove. The record is opened by scanning a barcode.

SYSTEM, RECORD AND INTEGRATION

One device from checklist to record.

The checklist and vehicle data come from your system and results are written back. Voice guidance, voice defect recording, photos and, where needed, image processing all run on the same glove.

Vehicle body to be inspected
01 / 04

Checklist

Inspection steps and vehicle data are taken from your system and sent to the glove.

  • SourceThe system you use
  • Record opened byBarcode scan
    Components
  • VEGA-X smart glove
  • TIM INSPECT software
  • System integration
  • Software platform
  • Both hands free

    The worker carries no tablet and works on the vehicle with both hands.

  • No step is skipped

    Inspection steps come from the system and the glove announces each one in order.

  • Image processing on the same device

    Where needed, analysis runs on the spot on the image taken with the glove.

See every inspection in one record with its step, result and photo. Follow date, time and status in the record list and open the photos that were taken directly from the record.

APPLICATION FILM

The glove asks. The worker records by speaking.

English narration · horizontal 16:9

TIM INSPECT · EXPLORE SOLUTIONS

One platform. 35 applications.

Discover the next opportunity on your floor. Choose a solution area or industry and explore each application visually.

35 solutions
Verification & quality

Shipment & Crate Verification

Count passing crates, read their labels and match the load against the shipment list.

Automotive · Logistics & warehousing
Verification & quality

Returned Product Inspection

Identify returned products and record visual checks of damage, dates and product information.

Food & beverage · Retail & e-commerce · Logistics & warehousing
Verification & quality

Assembly Part Verification

Check parts, labels and surfaces during assembly and send the result to production systems.

Automotive · Manufacturing
Verification & quality

Cargo Sortation & Pallet Verification

Verify outgoing cargo by checking shipping labels and pallet contents together.

Logistics & warehousing · Aviation
Verification & quality

Metal Part & Label Verification

Match stamped metal-part numbers with crate labels to verify product identity.

Automotive · Manufacturing
Verification & quality

Quick-Connect Verification

Visually check that assembly quick-connects are fully seated and record the result.

Automotive · Manufacturing
Verification & quality

Vehicle Label Verification

Read vehicle-specific labels with OCR and compare them with expected production data.

Automotive · Manufacturing
Verification & quality

Component Assembly Inspection

Visually verify the assembly of components such as retaining rings, washers and plugs.

Automotive · Manufacturing
Verification & quality

Product & Carton Verification

Combine product, plug, label and carton-content checks before shipment.

Automotive · Manufacturing · Logistics & warehousing
Workplace safety

Forklift–Pedestrian Safety

Analyze risky encounters from camera feeds and alert the people involved through AXION.

Manufacturing · Logistics & warehousing
Workplace safety

Restricted-Zone Detection

Detect entry into hazardous areas and alert the worker and responsible team.

Manufacturing · Construction
Workplace safety

PPE Detection

Check the use of helmets, vests and other protective equipment in working areas.

Manufacturing · Construction · Logistics & warehousing
Workplace safety

Fire & Smoke Early Warning

Evaluate visible flame and smoke signs in camera feeds and notify the relevant team.

Manufacturing · Logistics & warehousing · Energy & facilities
Workplace safety

Spill & Leak Detection

Detect unexpected liquid accumulation and leaks, and notify teams with location information.

Manufacturing · Food & beverage · Energy & facilities
Workplace safety

Fallen or Motionless Person Detection

Detect falls or prolonged inactivity to support the assistance workflow.

Manufacturing · Logistics & warehousing · Energy & facilities
Workplace safety

Ergonomics & Posture Analysis

Analyze lifting, bending and reaching movements to make risky postures visible.

Manufacturing · Logistics & warehousing
Workplace safety

Working-at-Height Safety

Use visual checks to assess harness attachment, scaffolding and ladder use.

Construction · Energy & facilities · Manufacturing
Workplace safety

Lockout/Tagout Verification

Verify isolation steps with photographs to manage checks before maintenance.

Manufacturing · Energy & facilities
Workplace safety

Emergency Exit & Route Monitoring

Detect obstructions blocking emergency exits and access routes through camera feeds.

Manufacturing · Logistics & warehousing · Retail & e-commerce
Workplace safety

Loading Dock Safety

Check truck position, wheel chocks and dock conditions to flag risky loading situations.

Logistics & warehousing · Manufacturing
Operational efficiency

Assembly Sequence Verification

Monitor the defined assembly sequence and flag missed or out-of-order steps.

Automotive · Manufacturing
Operational efficiency

Cycle Time & Microstops

Measure station cycles and brief stops from video to reveal deviations in workflow.

Automotive · Manufacturing
Operational efficiency

Machine Utilization

Assess running and waiting periods visually and notify the relevant team of stops.

Manufacturing · Automotive
Operational efficiency

Dock & Door Monitoring

Track vehicle arrivals, door use and loading progress in one workflow.

Logistics & warehousing · Manufacturing
Operational efficiency

Four-Side Pallet Scanning

Read labels across pallet faces during a pass and match them against the order list.

Logistics & warehousing · Retail & e-commerce · Food & beverage
Operational efficiency

Dimensioning

Check carton and pallet dimensions with vision and laser measurement and create a record.

Logistics & warehousing · Retail & e-commerce
Operational efficiency

Damage Detection

Document carton, pallet and container damage with photographs at entry and exit points.

Logistics & warehousing · Retail & e-commerce · Manufacturing
Operational efficiency

Inventory Counting

Read shelf and pallet labels to reveal empty locations and placement mismatches.

Logistics & warehousing · Retail & e-commerce · Manufacturing
Operational efficiency

License Plate & Container OCR

Read vehicle and container numbers and match them with appointment and shipment records.

Logistics & warehousing · Manufacturing
Operational efficiency

Conveyor Jam Detection

Detect conveyor build-ups and jams and notify the person who can respond.

Logistics & warehousing · Manufacturing · Food & beverage
Facility monitoring

Gauge & Meter Reading

Read analog gauges from images, record values and notify teams of threshold exceptions.

Manufacturing · Energy & facilities
Facility monitoring

Maintenance Rounds

Follow inspection points step by step and document findings with photographs and voice.

Manufacturing · Energy & facilities
Facility monitoring

Unauthorized Entry

Monitor designated-area entry and tailgating and notify the security team.

Manufacturing · Logistics & warehousing · Retail & e-commerce
Facility monitoring

Environmental Monitoring

Monitor visible emissions, dust and waste-sorting conditions through camera feeds.

Manufacturing · Energy & facilities

FAQ

Questions, answered

Voice-Guided Final Inspection is a quality inspection solution on Thread In Motion’s TIM INSPECT platform that announces inspection steps through the VEGA-X smart glove and records defects by speech and photo. Both hands stay free; records are written to the system with photos and transcribed voice notes.

With TIM INSPECT, Voice-Guided Final Inspection works in four steps: 1) Get the checklist from the system: The inspection steps for that vehicle come from the system to the glove. The record is opened by scanning a barcode. 2) Inspect with voice guidance: VEGA-X announces the next point and shows it on its screen. The worker checks it with both hands, confirms if it is OK and moves on. 3) Say the defect, take the photo: When a defect is found, the worker says it out loud and the system turns it into text. The glove photographs the defect and adds it to the record. 4) Write the record to the system: When all steps are done, the record is written to the system together with its photos and transcribed voice notes.

Components used: VEGA-X smart glove, TIM INSPECT software, system integration and software platform. The checklist and vehicle data come from your system and results are written back. Voice guidance, voice defect recording, photos and, where needed, image processing all run on the same glove.

A tablet keeps one hand busy at all times and defects are typed in by hand. VEGA-X sits on the hand: both hands stay free, the glove announces the next check and defects are recorded by speaking. A photo of the defect is added to the record as well.

The checklist and vehicle data are taken from the systems you use, and results are written back to the same system. The record is opened by scanning a barcode. Which system to connect to is agreed together before installation.

In two places. Every point the worker finds defective is photographed and added to the record. If a checkpoint has its own image processing step defined, TIM INSPECT analyses the image taken with the glove on the spot.

The glove says the question out loud and shows it on its screen. If the point is OK, the worker confirms and moves on; if there is a defect, the worker says it out loud. The glove’s screen also offers OK, NOK, back and next options.

All records, photos and statuses are collected in a single software platform in the background. It provides summary counters, a record list with date and time, and access to the photos that were taken.

YOUR SITE

Let’s move your checklist onto the glove.

Let’s review your checkpoints, your defect recording flow and the system to connect to, then define the pilot scope and the results to measure from the start.

Request a solution discussioninfo@threadinmotion.com
Chat on WhatsApp WhatsApp'tan yazın