Get a demo
Close-up of a quick connector joining a hose to a pipe in the engine bay

AUTOMOTIVE · QUICK-CONNECT VERIFICATION

It looks connected. Is it locked?

Verify from an image that the quick connectors joining hoses and pipes are fully seated. After pushing the connector on, the operator captures it with VEGA-X; TIM INSPECT returns OK or NOK, and the result reaches the smart screen on the line and the PLC.

Discuss the assembly solution
Move the lens to see what the camera sees

Trusted by the world’s leading companies.

Sürat KargoÇimsa
Brisa
Togg
Eti
Arçelik
Yusen Logistics
CEVA Logistics
Aramex
Kühne + Nagel
CarrefourMercedes-Benz
Coca-Cola
Toyota
Renault
Honda
Ford
Stellantis
BSH
Daikin
DiageoLactalis
MANN+HUMMEL
Viessmann
Sika

Results from an automotive manufacturer deployment

100%
Traceability
4 s
Process time, down from 8 seconds
100%
Customer satisfaction

Results for this deployment are based on the Thread In Motion project report.

THE NEED ON THE FLOOR

Know that every connection is fully seated.

In parts assembly, hoses and pipes are joined with quick connectors: the operator pushes the connector on, it seats and locks. If it is not pushed all the way, it still looks in place from outside, but it is not locked. The difference is hard to see by eye, and the connections sit in tight spots with a restricted view.

  • 01

    Capture with the hand that connects

    The connections sit under the vehicle and inside the engine bay, where a fixed camera’s view gets blocked from one vehicle to the next. VEGA-X reaches the right angle together with the hand that makes the connection.

  • 02

    Make the check part of the motion

    TIM INSPECT first finds the connector, then checks whether it has fully engaged with its counterpart. The check follows straight on from the connecting motion; no extra movement is needed.

  • 03

    Keep a faulty connection from moving on

    On NOK the glove vibrates, the signal goes to the PLC and the line stops. The operator fixes the connection and checks again; the vehicle does not reach the next station with a half-locked connector.

EXPLORE THE SITUATION

What happens when a connector is not fully seated?

Choose a situation to see what is checked in the image, how the alert is given and how the vehicle record is completed.

A gap remains between the quick connector and the stop on the pipe
Gap · not fully seated
TIM INSPECT analysis
  • ConnectorFound
  • SeatingGap
  • DecisionNOK
VEGA-X image · lower connection
SituationNot fully seated

The lower connector looks connected, but its body has not reached the stop on the pipe; a gap remains.

Response on the floor

The operator captures the connection with VEGA-X. TIM INSPECT picks out the gap and returns NOK; the glove vibrates.

System decision

The NOK result appears on the smart screen and goes to the PLC. The image is added to the vehicle record with the result.

Vehicle connection record
Lower connectionNOK
Upper connectionPending
2Connections
0Seated
1Open
Alert to the operator
VEGA-X · On the operator’s hand · VEGA-X
NOKLower connection · NOK
On the operator’s hand · VEGA-X

Vibration: connector not fully seated. Screen: “Lower connection · NOK”.

NOK open · lower connection not seated

HOW IT WORKS

Connect. Capture. See the result on the line.

A quick connector among hoses and cables in the engine bay
Quick connector
VEGA-X image
  • PositionUpper connection
  • ImageCaptured
Image capture
The seating area of the connector is marked in the image
Quick connector
TIM INSPECT analysis
  • ConnectorFound
  • SeatingFull
  • DecisionOK
Image analysis
VEGA-X
NOKNot fully seated
PLC
  • ResultNOK
  • LineStopped
Alert and line control
A vehicle on the assembly line; connection record on screen
AR-3147
Vehicle AR-3147
  • Lower connectionOK
  • Upper connectionOK
  • ImagesStored
Vehicle record
01 / 04

Connect and capture

The operator pushes the quick connector on and captures it with VEGA-X. The glove reaches the right angle together with the hand that makes the connection.

SYSTEM, RECORD AND INTEGRATION

One inspection flow, from the glove to the PLC.

VEGA-X captures the image and TIM INSPECT returns OK or NOK on the server; the result reaches the smart screen on the line and the PLC. The same method applies to engine types where the connector sits in a different position.

Quick connector in the engine bay
01 / 04

Connection image

The operator captures the connection just made with VEGA-X.

  • SourceVEGA-X smart glove
  • PositionLower and upper connection
    Components
  • VEGA-X
  • TIM INSPECT software
  • Server
  • Smart screen
  • PLC integration
  • Where a camera cannot see

    Check connections under the vehicle and inside the engine bay.

  • A small gap in a busy scene

    Pick out a small seating gap among hoses and cables.

  • A decision wired to the line

    Send the result to the PLC so the line stops on NOK.

Follow in one record which connection on which vehicle was checked and when, together with its image. A NOK result, the correction and the repeat check sit in the same vehicle record, documenting that every connection is fully seated.

APPLICATION FILM

VEGA-X captures the connection. TIM INSPECT verifies the seating.

English narration · horizontal 16:9

TIM INSPECT · EXPLORE SOLUTIONS

One platform. 35 applications.

Discover the next opportunity on your floor. Choose a solution area or industry and explore each application visually.

35 solutions
Verification & quality

Shipment & Crate Verification

Count passing crates, read their labels and match the load against the shipment list.

Automotive · Logistics & warehousing
Verification & quality

Returned Product Inspection

Identify returned products and record visual checks of damage, dates and product information.

Food & beverage · Retail & e-commerce · Logistics & warehousing
Verification & quality

Voice-Guided Final Inspection

Complete hands-free inspection steps and document findings with voice and photographs.

Automotive · Manufacturing
Verification & quality

Assembly Part Verification

Check parts, labels and surfaces during assembly and send the result to production systems.

Automotive · Manufacturing
Verification & quality

Cargo Sortation & Pallet Verification

Verify outgoing cargo by checking shipping labels and pallet contents together.

Logistics & warehousing · Aviation
Verification & quality

Metal Part & Label Verification

Match stamped metal-part numbers with crate labels to verify product identity.

Automotive · Manufacturing
Verification & quality

Vehicle Label Verification

Read vehicle-specific labels with OCR and compare them with expected production data.

Automotive · Manufacturing
Verification & quality

Component Assembly Inspection

Visually verify the assembly of components such as retaining rings, washers and plugs.

Automotive · Manufacturing
Verification & quality

Product & Carton Verification

Combine product, plug, label and carton-content checks before shipment.

Automotive · Manufacturing · Logistics & warehousing
Workplace safety

Forklift–Pedestrian Safety

Analyze risky encounters from camera feeds and alert the people involved through AXION.

Manufacturing · Logistics & warehousing
Workplace safety

Restricted-Zone Detection

Detect entry into hazardous areas and alert the worker and responsible team.

Manufacturing · Construction
Workplace safety

PPE Detection

Check the use of helmets, vests and other protective equipment in working areas.

Manufacturing · Construction · Logistics & warehousing
Workplace safety

Fire & Smoke Early Warning

Evaluate visible flame and smoke signs in camera feeds and notify the relevant team.

Manufacturing · Logistics & warehousing · Energy & facilities
Workplace safety

Spill & Leak Detection

Detect unexpected liquid accumulation and leaks, and notify teams with location information.

Manufacturing · Food & beverage · Energy & facilities
Workplace safety

Fallen or Motionless Person Detection

Detect falls or prolonged inactivity to support the assistance workflow.

Manufacturing · Logistics & warehousing · Energy & facilities
Workplace safety

Ergonomics & Posture Analysis

Analyze lifting, bending and reaching movements to make risky postures visible.

Manufacturing · Logistics & warehousing
Workplace safety

Working-at-Height Safety

Use visual checks to assess harness attachment, scaffolding and ladder use.

Construction · Energy & facilities · Manufacturing
Workplace safety

Lockout/Tagout Verification

Verify isolation steps with photographs to manage checks before maintenance.

Manufacturing · Energy & facilities
Workplace safety

Emergency Exit & Route Monitoring

Detect obstructions blocking emergency exits and access routes through camera feeds.

Manufacturing · Logistics & warehousing · Retail & e-commerce
Workplace safety

Loading Dock Safety

Check truck position, wheel chocks and dock conditions to flag risky loading situations.

Logistics & warehousing · Manufacturing
Operational efficiency

Assembly Sequence Verification

Monitor the defined assembly sequence and flag missed or out-of-order steps.

Automotive · Manufacturing
Operational efficiency

Cycle Time & Microstops

Measure station cycles and brief stops from video to reveal deviations in workflow.

Automotive · Manufacturing
Operational efficiency

Machine Utilization

Assess running and waiting periods visually and notify the relevant team of stops.

Manufacturing · Automotive
Operational efficiency

Dock & Door Monitoring

Track vehicle arrivals, door use and loading progress in one workflow.

Logistics & warehousing · Manufacturing
Operational efficiency

Four-Side Pallet Scanning

Read labels across pallet faces during a pass and match them against the order list.

Logistics & warehousing · Retail & e-commerce · Food & beverage
Operational efficiency

Dimensioning

Check carton and pallet dimensions with vision and laser measurement and create a record.

Logistics & warehousing · Retail & e-commerce
Operational efficiency

Damage Detection

Document carton, pallet and container damage with photographs at entry and exit points.

Logistics & warehousing · Retail & e-commerce · Manufacturing
Operational efficiency

Inventory Counting

Read shelf and pallet labels to reveal empty locations and placement mismatches.

Logistics & warehousing · Retail & e-commerce · Manufacturing
Operational efficiency

License Plate & Container OCR

Read vehicle and container numbers and match them with appointment and shipment records.

Logistics & warehousing · Manufacturing
Operational efficiency

Conveyor Jam Detection

Detect conveyor build-ups and jams and notify the person who can respond.

Logistics & warehousing · Manufacturing · Food & beverage
Facility monitoring

Gauge & Meter Reading

Read analog gauges from images, record values and notify teams of threshold exceptions.

Manufacturing · Energy & facilities
Facility monitoring

Maintenance Rounds

Follow inspection points step by step and document findings with photographs and voice.

Manufacturing · Energy & facilities
Facility monitoring

Unauthorized Entry

Monitor designated-area entry and tailgating and notify the security team.

Manufacturing · Logistics & warehousing · Retail & e-commerce
Facility monitoring

Environmental Monitoring

Monitor visible emissions, dust and waste-sorting conditions through camera feeds.

Manufacturing · Energy & facilities

FAQ

Questions, answered

Quick-Connect Verification is a quality control solution on Thread In Motion’s TIM INSPECT platform that verifies from VEGA-X images that hose and pipe quick connectors are fully seated. On NOK the glove alerts the operator and the PLC is signalled; each result is stored in the vehicle record.

With TIM INSPECT, Quick-Connect Verification works in four steps: 1) Connect and capture: The operator pushes the quick connector on and captures it with VEGA-X. The glove reaches the right angle together with the hand that makes the connection. 2) Assess the seating: The image goes to the server. TIM INSPECT first finds the connector, then checks whether it has fully engaged with its counterpart: OK or NOK. 3) Alert on NOK: If the connector is not fully seated, the glove vibrates. The signal goes to the PLC and the line stops; the operator fixes the connection and checks again. 4) Record each connection by vehicle: The image and result of the lower and upper connections are stored against the vehicle. The result appears on the smart screen on the line.

Components used: VEGA-X, TIM INSPECT software, server, smart screen and PLC integration. VEGA-X captures the image and TIM INSPECT returns OK or NOK on the server; the result reaches the smart screen on the line and the PLC. The same method applies to engine types where the connector sits in a different position.

The quick connector is first found in the image, then assessed for whether it has fully engaged with its counterpart. In a correct assembly the connector body reaches the stop on the pipe and the lock ring sits in place; in a faulty one a gap remains. The decision is returned as OK or NOK.

The connections sit under the vehicle and inside the engine bay, in tight spots with a restricted view, and a fixed camera’s view gets blocked from one vehicle to the next. The operator’s hand is already there: the hand that makes the connection brings VEGA-X to the right angle too.

In this deployment, yes. The NOK result goes to the PLC and the line stops, while the glove alerts the operator by vibration. The operator fixes the connection, checks again and the line moves on. The scope of the PLC connection is defined together for each line during setup.

The check follows straight on from the connecting motion; the operator does not walk to a separate station. In this deployment, process time went from 8 seconds to 4.

Yes. The lower and upper connections are checked separately, and the connector position depends on the engine type. In this deployment the same method was applied to the connections of two different engine types.

YOUR SITE

Let’s look at your connection points together.

Let’s assess feasibility together using your own sample OK and NOK images, then define the line integration and the results to measure from the start.

Request a solution discussioninfo@threadinmotion.com
Chat on WhatsApp WhatsApp'tan yazın