
AUTOMOTIVE · PART AND LABEL VERIFICATION
Verify the part in the crate against its labels.
Read the production label, the customer label and the part number stamped into the metal with AXION, then compare all three. The image is adjusted on the spot for shiny surfaces, and the worker is alerted before shipping if anything does not match.
Trusted by the world’s leading companies.
Results from an automotive supplier deployment
Results for this deployment are based on the Thread In Motion project report.
THE NEED ON THE FLOOR
Make sure the labels and the part tell the same story.
In automotive supply, every crate carries two labels: the production label and the customer label. Both must match the part inside. What tells very similar parts apart is often just a number stamped into the metal, and that number is hard to read on a shiny surface.
- 01
Compare the labels with each other
The worker scans the production label first, then the customer label. If the two do not match, the error surfaces before anyone looks at the part.
- 02
Read the stamped number off the metal
The number is stamped, not printed, in the metal’s own colour. AXION looks at the part up close and adjusts brightness and contrast on the spot; orientation and angle do not matter.
- 03
Catch mismatches before shipping
If the part does not match the labels, the device vibrates and the worker is notified. The result is written to the system you use: SAP, MES or whichever is required.
EXPLORE THE SITUATION
What happens when a label or the part does not match?
Choose a situation to see what AXION reads, whether the error is in the label or in the part, and how the record closes.

Label comparison
- ProductionTIM 482 731 C
- CustomerTIM 482 713 C
- ResultMismatch
The production label and the customer label on the crate show different part numbers.
AXION compares the two labels; on a mismatch the device vibrates and the worker is notified. The label is corrected and both labels are scanned again.
The error surfaces before the part is checked. The record shows that the problem is in the label.
Production labelMatchCustomer labelMismatchPart numberPending

Vibration and notification: “Labels do not match. Check the customer label.”
HOW IT WORKS
Scan the labels. Show the part. Record the result.

Crate KS-20417
- ProductionTIM 482 731 C
- CustomerTIM 482 731 C
- LabelsMatch

Image adjustment
- BrightnessAdjusting
- ContrastAdjusting
- AnalysisOn the device


Crate KS-20417
- Labels and partMatch
- CrateApproved
- SAPWritten
Scan both labels
The worker points AXION at the production label first, then at the customer label. The device compares the information on the two.
SYSTEM, RECORD AND INTEGRATION
One verification record, from label to part.
Label reading, character reading on metal and the comparison run on AXION itself, using Thread In Motion’s own AI models. The check stays in the worker’s hand, so parts do not have to be carried to a separate station.

Label reading
The production label and the customer label are read with AXION’s camera.
- ReadPart number · quantity · barcode
- OrderLabels first, then the part
- Components
- AXION
- TIM INSPECT AI models
- SAP or MES integration
Reading on difficult surfaces
Read stamped, low-contrast numbers on shiny metal.
Verification, not just reading
Compare label with label, and the part with the labels.
Decision on the device
The analysis runs on AXION, at the moment of reading.
For every crate, follow in one record which labels and which part number were read and what the result was. On a mismatch, the record shows whether the error was in the label or in the part, and the result is written to your SAP or MES system.
APPLICATION FILM
AXION reads the labels and the stamped number. Three matches approve the crate.

TIM INSPECT · EXPLORE SOLUTIONS
One platform. 35 applications.
Discover the next opportunity on your floor. Choose a solution area or industry and explore each application visually.
Verification & qualityShipment & Crate Verification
Count passing crates, read their labels and match the load against the shipment list.
Automotive · Logistics & warehousing
Verification & qualityReturned Product Inspection
Identify returned products and record visual checks of damage, dates and product information.
Food & beverage · Retail & e-commerce · Logistics & warehousing
Verification & qualityVoice-Guided Final Inspection
Complete hands-free inspection steps and document findings with voice and photographs.
Automotive · Manufacturing
Verification & qualityAssembly Part Verification
Check parts, labels and surfaces during assembly and send the result to production systems.
Automotive · Manufacturing
Verification & qualityCargo Sortation & Pallet Verification
Verify outgoing cargo by checking shipping labels and pallet contents together.
Logistics & warehousing · Aviation
Verification & qualityQuick-Connect Verification
Visually check that assembly quick-connects are fully seated and record the result.
Automotive · Manufacturing
Verification & qualityVehicle Label Verification
Read vehicle-specific labels with OCR and compare them with expected production data.
Automotive · Manufacturing
Verification & qualityComponent Assembly Inspection
Visually verify the assembly of components such as retaining rings, washers and plugs.
Automotive · Manufacturing
Verification & qualityProduct & Carton Verification
Combine product, plug, label and carton-content checks before shipment.
Automotive · Manufacturing · Logistics & warehousing
Workplace safetyForklift–Pedestrian Safety
Analyze risky encounters from camera feeds and alert the people involved through AXION.
Manufacturing · Logistics & warehousing
Workplace safetyRestricted-Zone Detection
Detect entry into hazardous areas and alert the worker and responsible team.
Manufacturing · Construction
Workplace safetyPPE Detection
Check the use of helmets, vests and other protective equipment in working areas.
Manufacturing · Construction · Logistics & warehousing
Workplace safetyFire & Smoke Early Warning
Evaluate visible flame and smoke signs in camera feeds and notify the relevant team.
Manufacturing · Logistics & warehousing · Energy & facilities
Workplace safetySpill & Leak Detection
Detect unexpected liquid accumulation and leaks, and notify teams with location information.
Manufacturing · Food & beverage · Energy & facilities
Workplace safetyFallen or Motionless Person Detection
Detect falls or prolonged inactivity to support the assistance workflow.
Manufacturing · Logistics & warehousing · Energy & facilities
Workplace safetyErgonomics & Posture Analysis
Analyze lifting, bending and reaching movements to make risky postures visible.
Manufacturing · Logistics & warehousing
Workplace safetyWorking-at-Height Safety
Use visual checks to assess harness attachment, scaffolding and ladder use.
Construction · Energy & facilities · Manufacturing
Workplace safetyLockout/Tagout Verification
Verify isolation steps with photographs to manage checks before maintenance.
Manufacturing · Energy & facilities
Workplace safetyEmergency Exit & Route Monitoring
Detect obstructions blocking emergency exits and access routes through camera feeds.
Manufacturing · Logistics & warehousing · Retail & e-commerce
Workplace safetyLoading Dock Safety
Check truck position, wheel chocks and dock conditions to flag risky loading situations.
Logistics & warehousing · Manufacturing
Operational efficiencyAssembly Sequence Verification
Monitor the defined assembly sequence and flag missed or out-of-order steps.
Automotive · Manufacturing
Operational efficiencyCycle Time & Microstops
Measure station cycles and brief stops from video to reveal deviations in workflow.
Automotive · Manufacturing
Operational efficiencyMachine Utilization
Assess running and waiting periods visually and notify the relevant team of stops.
Manufacturing · Automotive
Operational efficiencyDock & Door Monitoring
Track vehicle arrivals, door use and loading progress in one workflow.
Logistics & warehousing · Manufacturing
Operational efficiencyFour-Side Pallet Scanning
Read labels across pallet faces during a pass and match them against the order list.
Logistics & warehousing · Retail & e-commerce · Food & beverage
Operational efficiencyDimensioning
Check carton and pallet dimensions with vision and laser measurement and create a record.
Logistics & warehousing · Retail & e-commerce
Operational efficiencyDamage Detection
Document carton, pallet and container damage with photographs at entry and exit points.
Logistics & warehousing · Retail & e-commerce · Manufacturing
Operational efficiencyInventory Counting
Read shelf and pallet labels to reveal empty locations and placement mismatches.
Logistics & warehousing · Retail & e-commerce · Manufacturing
Operational efficiencyLicense Plate & Container OCR
Read vehicle and container numbers and match them with appointment and shipment records.
Logistics & warehousing · Manufacturing
Operational efficiencyConveyor Jam Detection
Detect conveyor build-ups and jams and notify the person who can respond.
Logistics & warehousing · Manufacturing · Food & beverage
Facility monitoringGauge & Meter Reading
Read analog gauges from images, record values and notify teams of threshold exceptions.
Manufacturing · Energy & facilities
Facility monitoringMaintenance Rounds
Follow inspection points step by step and document findings with photographs and voice.
Manufacturing · Energy & facilities
Facility monitoringUnauthorized Entry
Monitor designated-area entry and tailgating and notify the security team.
Manufacturing · Logistics & warehousing · Retail & e-commerce
Facility monitoringEnvironmental Monitoring
Monitor visible emissions, dust and waste-sorting conditions through camera feeds.
Manufacturing · Energy & facilitiesFAQ
Questions, answered
Metal Part & Label Verification is a quality control solution on Thread In Motion’s TIM INSPECT platform that reads crate labels and the part number stamped into metal with AXION and compares them. A mismatch alerts the worker before shipping; results are written to SAP or MES.
With TIM INSPECT, Metal Part & Label Verification works in four steps: 1) Scan both labels: The worker points AXION at the production label first, then at the customer label. The device compares the information on the two. 2) Show the part to the device: On a glaring surface AXION adjusts brightness and contrast, then reads the number stamped into the metal whatever its orientation or angle. 3) Get alerted on a mismatch: If the labels or the part do not match, the device vibrates and the worker is notified. It is clear whether the error is in the label or in the part. 4) Write the result to your system: If all three match, the crate is approved. Every result is recorded with its evidence photo and written to your SAP or MES system.
Components used: AXION, TIM INSPECT AI models and SAP or MES integration. Label reading, character reading on metal and the comparison run on AXION itself, using Thread In Motion’s own AI models. The check stays in the worker’s hand, so parts do not have to be carried to a separate station.
Metal reflects light, and a stamped number has the metal’s own colour and very low contrast. Because AXION is in the worker’s hand, it looks at the part up close from the right angle and adjusts the brightness and contrast of the image on the spot. Surface conditions such as scratches, oil or pen marks are assessed together on your own parts during setup.
A fixed camera looks at the part from one angle; when the light glares at that angle, the number cannot be read. The part also sits differently every time: the number may be upside down, sideways or tilted. AXION is in the worker’s hand, so it looks from the right angle and the check happens without carrying the part to a separate station.
The order of checks is deliberate: first the two labels are compared with each other, then the part is compared with the labels. If the labels disagree, the error surfaces before the part is checked. If the labels agree but the part does not, the error is in the part.
The result is written to the system you use. In deployments this is usually SAP; whether it is SAP, MES or another system, the integration is planned accordingly. The check usually takes place before shipping.

YOUR SITE
Let’s review your parts and labels together.
Let’s look at your part variants, label structure and surface conditions together, then define the checkpoint, the integration and the results to measure from the start.
























