Get a demo

OPERATIONAL EFFICIENCY · MACHINE UTILIZATION

See when the machine is really waiting.

Understand from camera feeds when a machine looks busy but is actually waiting, and what really causes its stops. When a stop begins, the operator, the maintenance technician or the material handler is notified on AXION.

Discuss the efficiency solution

Trusted by the world’s leading companies.

Sürat KargoÇimsa
Brisa
Togg
Eti
Arçelik
Yusen Logistics
CEVA Logistics
Aramex
Kühne + Nagel
CarrefourMercedes-Benz
Coca-Cola
Toyota
Renault
Honda
Ford
Stellantis
BSH
Daikin
DiageoLactalis
MANN+HUMMEL
Viessmann
Sika
Classify
Running, waiting, setup, fault
Alert
Tell the right person about the stop
Record
Stop reason and duration

THE NEED ON THE FLOOR

A camera reads the machine that gives you no data.

Machine data may say “running” while the operator is waiting for material. Stop reasons depend on the code the operator picks, and most end up as “other”. Older machines provide no data at all. TIM INSPECT watches the machine and its surroundings on camera and classifies its status by itself.

  • 01

    Read the real status from video

    Machine motion, material feed and output, whether the operator is at the machine and the colour of the signal light are assessed together.

  • 02

    Tell the right person about the stop

    When the machine stops unexpectedly or runs out of material, the operator, the maintenance technician or the material handler is notified on AXION.

  • 03

    Stop entering reasons by hand

    Stop reasons and durations are recorded automatically. Die changes and setup times are tracked separately as well.

EXPLORE THE SITUATION

What happens when the machine stops?

Choose a situation to see how the camera classifies the machine status, who receives the notification and how the stop is recorded.

Laser cutting machine with the cutting head idle above the table
Cutting head · idle
Machine 3 · Laser cutting
  • Machine signalRunning
  • CameraMaterial wait
  • Duration4 min
Machine camera
SituationMaterial wait

The machine signal says “running”, but the cutting head is idle and no new material is reaching the table.

Response on the floor

The material handler is notified on AXION with the machine details and brings material to the machine; the operator resumes production.

System decision

The status is classified as “waiting” instead of “running”. The waiting time is recorded together with its reason.

What the camera watches
Machine motionIdle
Material feedAbsent
Part outputWaiting
OperatorNormal
4Watched
1Normal
3Deviation
AXION alert
AXION · Operator · belt
!Waiting for material
Operator · belt
AXION · Person in charge · hand
!Waiting for material
Person in charge · hand

Notification: “Machine 3 is waiting for material.”

Notification open · material awaited

HOW IT WORKS

Watch. Classify. Alert on a stop.

Laser cutting machine with the cutting head and table marked in the image
Cutting head
Table · material
Machine 3 · Laser cutting
  • Data linkNone
  • Status sourceCamera
Machine view
Machine 5 · this shift
  • Running5 h 12 min
  • Waiting48 min
  • Setup36 min
  • Fault14 min
Status classification
AXION
!Machine 5 stopped
Alert to the right person
A maintenance technician checks the machine connections with a flashlight
Stop record
  • MachineMachine 8
  • ReasonFault
  • Duration14 min
  • ResponseMaintenance
Stop record
01 / 04

Watch the machine and its area

A fixed camera watches the machine and its surroundings. No data is expected from the machine, so older machines are covered the same way.

SYSTEM, RECORD AND INTEGRATION

Combine the stop record with plan and quantity data.

The statuses classified by the camera and the stop reasons are gathered in one record. Planned production time and quantity come from the MES, and utilization reports are built by combining the two.

Cutting head and table of the laser cutting machine
01 / 04

Machine view

Continuous video from a fixed camera that sees the machine and its area.

  • SourceFixed cameras
  • CoverageMachine and surroundings
    Components
  • Fixed cameras
  • TIM INSPECT software
  • AXION
  • MES connection
  • Older machines included

    The status of a machine that provides no data is read from video.

  • Stop reasons without manual entry

    The reason is recorded without depending on a code picked by the operator.

  • Together with plan data

    Video alone is not enough for utilization figures; it is combined with plan and quantity data.

Review in one record how long a machine ran and waited during the day and the reason for each stop. Track die changes and setup times separately, and set improvement priorities according to the recorded stop reasons.

SOLUTION FILM

The camera reads the machine status. AXION reports the stop to the right person.

English narration · horizontal 16:9

TIM INSPECT · EXPLORE SOLUTIONS

One platform. 35 applications.

Discover the next opportunity on your floor. Choose a solution area or industry and explore each application visually.

35 solutions
Operational efficiency

Assembly Sequence Verification

Monitor the defined assembly sequence and flag missed or out-of-order steps.

Automotive · Manufacturing
Operational efficiency

Cycle Time & Microstops

Measure station cycles and brief stops from video to reveal deviations in workflow.

Automotive · Manufacturing
Operational efficiency

Dock & Door Monitoring

Track vehicle arrivals, door use and loading progress in one workflow.

Logistics & warehousing · Manufacturing
Operational efficiency

Four-Side Pallet Scanning

Read labels across pallet faces during a pass and match them against the order list.

Logistics & warehousing · Retail & e-commerce · Food & beverage
Operational efficiency

Dimensioning

Check carton and pallet dimensions with vision and laser measurement and create a record.

Logistics & warehousing · Retail & e-commerce
Operational efficiency

Damage Detection

Document carton, pallet and container damage with photographs at entry and exit points.

Logistics & warehousing · Retail & e-commerce · Manufacturing
Operational efficiency

Inventory Counting

Read shelf and pallet labels to reveal empty locations and placement mismatches.

Logistics & warehousing · Retail & e-commerce · Manufacturing
Operational efficiency

License Plate & Container OCR

Read vehicle and container numbers and match them with appointment and shipment records.

Logistics & warehousing · Manufacturing
Operational efficiency

Conveyor Jam Detection

Detect conveyor build-ups and jams and notify the person who can respond.

Logistics & warehousing · Manufacturing · Food & beverage
Verification & quality

Shipment & Crate Verification

Count passing crates, read their labels and match the load against the shipment list.

Automotive · Logistics & warehousing
Verification & quality

Returned Product Inspection

Identify returned products and record visual checks of damage, dates and product information.

Food & beverage · Retail & e-commerce · Logistics & warehousing
Verification & quality

Voice-Guided Final Inspection

Complete hands-free inspection steps and document findings with voice and photographs.

Automotive · Manufacturing
Verification & quality

Assembly Part Verification

Check parts, labels and surfaces during assembly and send the result to production systems.

Automotive · Manufacturing
Verification & quality

Cargo Sortation & Pallet Verification

Verify outgoing cargo by checking shipping labels and pallet contents together.

Logistics & warehousing · Aviation
Verification & quality

Metal Part & Label Verification

Match stamped metal-part numbers with crate labels to verify product identity.

Automotive · Manufacturing
Verification & quality

Quick-Connect Verification

Visually check that assembly quick-connects are fully seated and record the result.

Automotive · Manufacturing
Verification & quality

Vehicle Label Verification

Read vehicle-specific labels with OCR and compare them with expected production data.

Automotive · Manufacturing
Verification & quality

Component Assembly Inspection

Visually verify the assembly of components such as retaining rings, washers and plugs.

Automotive · Manufacturing
Verification & quality

Product & Carton Verification

Combine product, plug, label and carton-content checks before shipment.

Automotive · Manufacturing · Logistics & warehousing
Workplace safety

Forklift–Pedestrian Safety

Analyze risky encounters from camera feeds and alert the people involved through AXION.

Manufacturing · Logistics & warehousing
Workplace safety

Restricted-Zone Detection

Detect entry into hazardous areas and alert the worker and responsible team.

Manufacturing · Construction
Workplace safety

PPE Detection

Check the use of helmets, vests and other protective equipment in working areas.

Manufacturing · Construction · Logistics & warehousing
Workplace safety

Fire & Smoke Early Warning

Evaluate visible flame and smoke signs in camera feeds and notify the relevant team.

Manufacturing · Logistics & warehousing · Energy & facilities
Workplace safety

Spill & Leak Detection

Detect unexpected liquid accumulation and leaks, and notify teams with location information.

Manufacturing · Food & beverage · Energy & facilities
Workplace safety

Fallen or Motionless Person Detection

Detect falls or prolonged inactivity to support the assistance workflow.

Manufacturing · Logistics & warehousing · Energy & facilities
Workplace safety

Ergonomics & Posture Analysis

Analyze lifting, bending and reaching movements to make risky postures visible.

Manufacturing · Logistics & warehousing
Workplace safety

Working-at-Height Safety

Use visual checks to assess harness attachment, scaffolding and ladder use.

Construction · Energy & facilities · Manufacturing
Workplace safety

Lockout/Tagout Verification

Verify isolation steps with photographs to manage checks before maintenance.

Manufacturing · Energy & facilities
Workplace safety

Emergency Exit & Route Monitoring

Detect obstructions blocking emergency exits and access routes through camera feeds.

Manufacturing · Logistics & warehousing · Retail & e-commerce
Workplace safety

Loading Dock Safety

Check truck position, wheel chocks and dock conditions to flag risky loading situations.

Logistics & warehousing · Manufacturing
Facility monitoring

Gauge & Meter Reading

Read analog gauges from images, record values and notify teams of threshold exceptions.

Manufacturing · Energy & facilities
Facility monitoring

Maintenance Rounds

Follow inspection points step by step and document findings with photographs and voice.

Manufacturing · Energy & facilities
Facility monitoring

Unauthorized Entry

Monitor designated-area entry and tailgating and notify the security team.

Manufacturing · Logistics & warehousing · Retail & e-commerce
Facility monitoring

Environmental Monitoring

Monitor visible emissions, dust and waste-sorting conditions through camera feeds.

Manufacturing · Energy & facilities

FAQ

Questions, answered

Machine Utilization is an operational efficiency solution on Thread In Motion’s TIM INSPECT platform that classifies machine status as running, waiting, setup or fault from fixed camera feeds, older machines included. When a stop begins, the right person is notified on AXION; stop reasons and durations are recorded automatically.

With TIM INSPECT, Machine Utilization works in four steps: 1) Watch the machine and its area: A fixed camera watches the machine and its surroundings. No data is expected from the machine, so older machines are covered the same way. 2) Classify the status: TIM INSPECT assesses the machine status in four classes: running, waiting, setup and fault. 3) Alert the right person: When a stop begins, the operator, the maintenance technician or the material handler concerned is notified on AXION. 4) Record the reason: Stop reasons are recorded automatically. Plan and quantity data come from the MES to build utilization reports.

Components used: fixed cameras, TIM INSPECT software, AXION and MES connection. The statuses classified by the camera and the stop reasons are gathered in one record. Planned production time and quantity come from the MES, and utilization reports are built by combining the two.

No. Video shows when the machine ran, when it waited and why it stopped, but it is not enough for utilization figures by itself. Planned production time and quantity come from the MES, and utilization reports are built by combining these data.

Yes. This scenario does not expect data from the machine; the camera looks at the colour of the signal light, the machine’s motion and the material feed and output. The scope is finalised around the angle from which the camera sees the machine.

The machine status is classified as running, waiting, setup or fault. Waiting for material, the operator being away from the machine, die changes and setup time, and the moments the machine sits idle are tracked separately.

When the machine stops unexpectedly or runs out of material, the operator, the maintenance technician or the material handler concerned is notified on AXION. Which situation goes to whom is defined together during setup.

The camera looks at the machine and its surroundings; it assesses whether the operator is at the machine, not who the operator is. Zones and actions are observed, not identity; images are filtered and only the event moment is stored. Privacy is designed in from the start in line with KVKK and GDPR requirements.

YOUR SITE

Start with one machine and see the real stop reasons.

Let’s review your machines, the camera view and the plan data to take from the MES together, then define the pilot scope and the metrics to measure at the end of the pilot from the start.

Request a solution discussioninfo@threadinmotion.com
Chat on WhatsApp WhatsApp'tan yazın