OPERATIONAL EFFICIENCY · PLATE & CONTAINER OCR
Let the camera keep the gate logbook.
Read the license plates, container numbers and trailer numbers of vehicles entering and leaving your site from camera feeds, and match them with appointment and shipment records. When a vehicle does not match, notify the gate guard and the shipping supervisor through AXION.
Trusted by the world’s leading companies.
THE NEED ON THE FLOOR
Stop keeping the vehicle log by hand.
At many sites the vehicle log at the gate is kept by hand, and nobody knows how long a truck stays on site. Loading the wrong container, or letting it leave, is an expensive mistake. TIM INSPECT matches the numbers read by the gate camera with appointment and shipment records.
- 01
Read the numbers at the gate
When a vehicle arrives, the camera reads the license plate, the container and seal numbers and the trailer number, and records the entry time.
- 02
Match what is read with records
The numbers are compared with the appointment and shipment record. If they match, an entry record is opened and the vehicle is directed to its door.
- 03
Verify again on the way out
The numbers are read again when the vehicle leaves. Time on site is reported from the entry and exit times.
EXPLORE THE SITUATION
What happens when a number does not match?
Choose a situation to see which number the camera reads, who is notified and how the entry or exit record is closed.

Entry · appointment check
- Plate34 TMA 482
- AppointmentNot found
- Entry recordNot opened
The plate of a vehicle arriving at the gate has been read, but there is no appointment for it.
A notification goes to the AXION of the gate guard and the shipping supervisor. The guard holds the vehicle while the supervisor checks the appointment.
No entry record is opened. The notification stays open until an appointment matches.
PlateDoneAppointmentNo appointmentContainer no.PendingShipment recordPending

Notification: “No appointment found for 34 TMA 482.”
HOW IT WORKS
Read. Match. Notify on a mismatch.

Entry · numbers read
- Plate34 TMA 482
- Trailer no.34 TMD 917
- Entry time08:14

Record matching
- ContainerTIMU 482137 5
- AppointmentMatched
- Shipment recordMatched
- Directed toDock 3



Exit verification
- PlateMatched
- Container no.Matched
- Time on site1 h 42 min
Read the numbers
A vehicle arrives at the gate. The camera reads the license plate, the container and seal numbers and the trailer number.
SYSTEM, RECORD AND INTEGRATION
One workflow from gate read to shipment record.
The numbers read are matched with records in the appointment and shipment system; where needed, the workflow connects to barrier control. Plate reading is a common product; the difference here is that reading is combined with shipment verification in the same system.

Gate view
License plate, container and trailer numbers seen by gate cameras.
- SourceFixed cameras (gate)
- ReadPlate · container · trailer
- Components
- Gate cameras
- TIM INSPECT software
- AXION
- Appointment and shipment system
- Barrier control
Gate and shipment in one system
Combine number reading with shipment verification in the same system.
Notifications to two roles
Inform the gate guard and the shipping supervisor together.
Entry and exit records
Record each vehicle’s entry and exit times with its numbers.
Review in one record which numbers a vehicle entered with and when, which record it matched and when it left. The time-on-site report is produced from these records.
SOLUTION FILM
Cameras read the numbers. AXION flags the vehicle that does not match.

TIM INSPECT · EXPLORE SOLUTIONS
One platform. 35 applications.
Discover the next opportunity on your floor. Choose a solution area or industry and explore each application visually.
Operational efficiencyAssembly Sequence Verification
Monitor the defined assembly sequence and flag missed or out-of-order steps.
Automotive · Manufacturing
Operational efficiencyCycle Time & Microstops
Measure station cycles and brief stops from video to reveal deviations in workflow.
Automotive · Manufacturing
Operational efficiencyMachine Utilization
Assess running and waiting periods visually and notify the relevant team of stops.
Manufacturing · Automotive
Operational efficiencyDock & Door Monitoring
Track vehicle arrivals, door use and loading progress in one workflow.
Logistics & warehousing · Manufacturing
Operational efficiencyFour-Side Pallet Scanning
Read labels across pallet faces during a pass and match them against the order list.
Logistics & warehousing · Retail & e-commerce · Food & beverage
Operational efficiencyDimensioning
Check carton and pallet dimensions with vision and laser measurement and create a record.
Logistics & warehousing · Retail & e-commerce
Operational efficiencyDamage Detection
Document carton, pallet and container damage with photographs at entry and exit points.
Logistics & warehousing · Retail & e-commerce · Manufacturing
Operational efficiencyInventory Counting
Read shelf and pallet labels to reveal empty locations and placement mismatches.
Logistics & warehousing · Retail & e-commerce · Manufacturing
Operational efficiencyConveyor Jam Detection
Detect conveyor build-ups and jams and notify the person who can respond.
Logistics & warehousing · Manufacturing · Food & beverage
Verification & qualityShipment & Crate Verification
Count passing crates, read their labels and match the load against the shipment list.
Automotive · Logistics & warehousing
Verification & qualityReturned Product Inspection
Identify returned products and record visual checks of damage, dates and product information.
Food & beverage · Retail & e-commerce · Logistics & warehousing
Verification & qualityVoice-Guided Final Inspection
Complete hands-free inspection steps and document findings with voice and photographs.
Automotive · Manufacturing
Verification & qualityAssembly Part Verification
Check parts, labels and surfaces during assembly and send the result to production systems.
Automotive · Manufacturing
Verification & qualityCargo Sortation & Pallet Verification
Verify outgoing cargo by checking shipping labels and pallet contents together.
Logistics & warehousing · Aviation
Verification & qualityMetal Part & Label Verification
Match stamped metal-part numbers with crate labels to verify product identity.
Automotive · Manufacturing
Verification & qualityQuick-Connect Verification
Visually check that assembly quick-connects are fully seated and record the result.
Automotive · Manufacturing
Verification & qualityVehicle Label Verification
Read vehicle-specific labels with OCR and compare them with expected production data.
Automotive · Manufacturing
Verification & qualityComponent Assembly Inspection
Visually verify the assembly of components such as retaining rings, washers and plugs.
Automotive · Manufacturing
Verification & qualityProduct & Carton Verification
Combine product, plug, label and carton-content checks before shipment.
Automotive · Manufacturing · Logistics & warehousing
Workplace safetyForklift–Pedestrian Safety
Analyze risky encounters from camera feeds and alert the people involved through AXION.
Manufacturing · Logistics & warehousing
Workplace safetyRestricted-Zone Detection
Detect entry into hazardous areas and alert the worker and responsible team.
Manufacturing · Construction
Workplace safetyPPE Detection
Check the use of helmets, vests and other protective equipment in working areas.
Manufacturing · Construction · Logistics & warehousing
Workplace safetyFire & Smoke Early Warning
Evaluate visible flame and smoke signs in camera feeds and notify the relevant team.
Manufacturing · Logistics & warehousing · Energy & facilities
Workplace safetySpill & Leak Detection
Detect unexpected liquid accumulation and leaks, and notify teams with location information.
Manufacturing · Food & beverage · Energy & facilities
Workplace safetyFallen or Motionless Person Detection
Detect falls or prolonged inactivity to support the assistance workflow.
Manufacturing · Logistics & warehousing · Energy & facilities
Workplace safetyErgonomics & Posture Analysis
Analyze lifting, bending and reaching movements to make risky postures visible.
Manufacturing · Logistics & warehousing
Workplace safetyWorking-at-Height Safety
Use visual checks to assess harness attachment, scaffolding and ladder use.
Construction · Energy & facilities · Manufacturing
Workplace safetyLockout/Tagout Verification
Verify isolation steps with photographs to manage checks before maintenance.
Manufacturing · Energy & facilities
Workplace safetyEmergency Exit & Route Monitoring
Detect obstructions blocking emergency exits and access routes through camera feeds.
Manufacturing · Logistics & warehousing · Retail & e-commerce
Workplace safetyLoading Dock Safety
Check truck position, wheel chocks and dock conditions to flag risky loading situations.
Logistics & warehousing · Manufacturing
Facility monitoringGauge & Meter Reading
Read analog gauges from images, record values and notify teams of threshold exceptions.
Manufacturing · Energy & facilities
Facility monitoringMaintenance Rounds
Follow inspection points step by step and document findings with photographs and voice.
Manufacturing · Energy & facilities
Facility monitoringUnauthorized Entry
Monitor designated-area entry and tailgating and notify the security team.
Manufacturing · Logistics & warehousing · Retail & e-commerce
Facility monitoringEnvironmental Monitoring
Monitor visible emissions, dust and waste-sorting conditions through camera feeds.
Manufacturing · Energy & facilitiesFAQ
Questions, answered
License Plate & Container OCR is an operational efficiency solution on Thread In Motion’s TIM INSPECT platform that reads license plates, container and trailer numbers with gate cameras and matches them with appointment and shipment records. Mismatches are reported to the gate guard and the shipping supervisor via AXION.
With TIM INSPECT, License Plate & Container OCR works in four steps: 1) Read the numbers: A vehicle arrives at the gate. The camera reads the license plate, the container and seal numbers and the trailer number. 2) Match with records: The system matches what was read with the appointment and shipment record. On a match, an entry record is opened and the vehicle is directed to a door. 3) Notify on a mismatch: If a vehicle has no appointment or does not match the record, the gate guard and the shipping supervisor are notified on AXION. 4) Verify again at exit: At the exit the numbers are read and verified again. Time on site is calculated from the entry and exit times.
Components used: gate cameras, TIM INSPECT software, AXION, appointment and shipment system and barrier control. The numbers read are matched with records in the appointment and shipment system; where needed, the workflow connects to barrier control. Plate reading is a common product; the difference here is that reading is combined with shipment verification in the same system.
Plate reading is a common product. The value in this scenario is that plate and container reading is combined with shipment verification in the same system: the number read at the gate is matched with the shipment record in one workflow, and mismatches reach the right people through AXION.
License plates, container numbers, seal numbers and trailer numbers are within the scope of this scenario; vehicle entry and exit times are recorded as well. Which number is read by which camera is agreed together before installation, based on camera positions at the gate.
The numbers read are matched with records in the appointment and shipment system. Where needed, the workflow connects to barrier control. The integration scope is planned around the systems used on site.
This scenario reads vehicle and container numbers; it does not assess who a person is. Where people appear in view, images are filtered and only the event moment is stored. Privacy is designed in from the start in line with KVKK and GDPR requirements.
This page describes a solution scenario; it does not include proven result figures. The metrics to track in a pilot, such as registration time at the gate or mismatches caught, are defined together with you at the start.

YOUR SITE
Connect your gate flow with the shipment record.
Let’s review your gate layout, your appointment and shipment system and the numbers to be read, then set the pilot scope and the metrics to track from the very start.
























