
AUTOMOTIVE · QUICK-CONNECT VERIFICATION
It looks connected. Is it locked?
Verify from an image that the quick connectors joining hoses and pipes are fully seated. After pushing the connector on, the operator captures it with VEGA-X; TIM INSPECT returns OK or NOK, and the result reaches the smart screen on the line and the PLC.
Trusted by the world’s leading companies.
Results from an automotive manufacturer deployment
Results for this deployment are based on the Thread In Motion project report.
THE NEED ON THE FLOOR
Know that every connection is fully seated.
In parts assembly, hoses and pipes are joined with quick connectors: the operator pushes the connector on, it seats and locks. If it is not pushed all the way, it still looks in place from outside, but it is not locked. The difference is hard to see by eye, and the connections sit in tight spots with a restricted view.
- 01
Capture with the hand that connects
The connections sit under the vehicle and inside the engine bay, where a fixed camera’s view gets blocked from one vehicle to the next. VEGA-X reaches the right angle together with the hand that makes the connection.
- 02
Make the check part of the motion
TIM INSPECT first finds the connector, then checks whether it has fully engaged with its counterpart. The check follows straight on from the connecting motion; no extra movement is needed.
- 03
Keep a faulty connection from moving on
On NOK the glove vibrates, the signal goes to the PLC and the line stops. The operator fixes the connection and checks again; the vehicle does not reach the next station with a half-locked connector.
EXPLORE THE SITUATION
What happens when a connector is not fully seated?
Choose a situation to see what is checked in the image, how the alert is given and how the vehicle record is completed.

TIM INSPECT analysis
- ConnectorFound
- SeatingGap
- DecisionNOK
The lower connector looks connected, but its body has not reached the stop on the pipe; a gap remains.
The operator captures the connection with VEGA-X. TIM INSPECT picks out the gap and returns NOK; the glove vibrates.
The NOK result appears on the smart screen and goes to the PLC. The image is added to the vehicle record with the result.
Lower connectionNOKUpper connectionPending
Vibration: connector not fully seated. Screen: “Lower connection · NOK”.
HOW IT WORKS
Connect. Capture. See the result on the line.

VEGA-X image
- PositionUpper connection
- ImageCaptured

TIM INSPECT analysis
- ConnectorFound
- SeatingFull
- DecisionOK

PLC
- ResultNOK
- LineStopped

Vehicle AR-3147
- Lower connectionOK
- Upper connectionOK
- ImagesStored
Connect and capture
The operator pushes the quick connector on and captures it with VEGA-X. The glove reaches the right angle together with the hand that makes the connection.
SYSTEM, RECORD AND INTEGRATION
One inspection flow, from the glove to the PLC.
VEGA-X captures the image and TIM INSPECT returns OK or NOK on the server; the result reaches the smart screen on the line and the PLC. The same method applies to engine types where the connector sits in a different position.

Connection image
The operator captures the connection just made with VEGA-X.
- SourceVEGA-X smart glove
- PositionLower and upper connection
- Components
- VEGA-X
- TIM INSPECT software
- Server
- Smart screen
- PLC integration
Where a camera cannot see
Check connections under the vehicle and inside the engine bay.
A small gap in a busy scene
Pick out a small seating gap among hoses and cables.
A decision wired to the line
Send the result to the PLC so the line stops on NOK.
Follow in one record which connection on which vehicle was checked and when, together with its image. A NOK result, the correction and the repeat check sit in the same vehicle record, documenting that every connection is fully seated.
APPLICATION FILM
VEGA-X captures the connection. TIM INSPECT verifies the seating.

TIM INSPECT · EXPLORE SOLUTIONS
One platform. 35 applications.
Discover the next opportunity on your floor. Choose a solution area or industry and explore each application visually.
Verification & qualityShipment & Crate Verification
Count passing crates, read their labels and match the load against the shipment list.
Automotive · Logistics & warehousing
Verification & qualityReturned Product Inspection
Identify returned products and record visual checks of damage, dates and product information.
Food & beverage · Retail & e-commerce · Logistics & warehousing
Verification & qualityVoice-Guided Final Inspection
Complete hands-free inspection steps and document findings with voice and photographs.
Automotive · Manufacturing
Verification & qualityAssembly Part Verification
Check parts, labels and surfaces during assembly and send the result to production systems.
Automotive · Manufacturing
Verification & qualityCargo Sortation & Pallet Verification
Verify outgoing cargo by checking shipping labels and pallet contents together.
Logistics & warehousing · Aviation
Verification & qualityMetal Part & Label Verification
Match stamped metal-part numbers with crate labels to verify product identity.
Automotive · Manufacturing
Verification & qualityVehicle Label Verification
Read vehicle-specific labels with OCR and compare them with expected production data.
Automotive · Manufacturing
Verification & qualityComponent Assembly Inspection
Visually verify the assembly of components such as retaining rings, washers and plugs.
Automotive · Manufacturing
Verification & qualityProduct & Carton Verification
Combine product, plug, label and carton-content checks before shipment.
Automotive · Manufacturing · Logistics & warehousing
Workplace safetyForklift–Pedestrian Safety
Analyze risky encounters from camera feeds and alert the people involved through AXION.
Manufacturing · Logistics & warehousing
Workplace safetyRestricted-Zone Detection
Detect entry into hazardous areas and alert the worker and responsible team.
Manufacturing · Construction
Workplace safetyPPE Detection
Check the use of helmets, vests and other protective equipment in working areas.
Manufacturing · Construction · Logistics & warehousing
Workplace safetyFire & Smoke Early Warning
Evaluate visible flame and smoke signs in camera feeds and notify the relevant team.
Manufacturing · Logistics & warehousing · Energy & facilities
Workplace safetySpill & Leak Detection
Detect unexpected liquid accumulation and leaks, and notify teams with location information.
Manufacturing · Food & beverage · Energy & facilities
Workplace safetyFallen or Motionless Person Detection
Detect falls or prolonged inactivity to support the assistance workflow.
Manufacturing · Logistics & warehousing · Energy & facilities
Workplace safetyErgonomics & Posture Analysis
Analyze lifting, bending and reaching movements to make risky postures visible.
Manufacturing · Logistics & warehousing
Workplace safetyWorking-at-Height Safety
Use visual checks to assess harness attachment, scaffolding and ladder use.
Construction · Energy & facilities · Manufacturing
Workplace safetyLockout/Tagout Verification
Verify isolation steps with photographs to manage checks before maintenance.
Manufacturing · Energy & facilities
Workplace safetyEmergency Exit & Route Monitoring
Detect obstructions blocking emergency exits and access routes through camera feeds.
Manufacturing · Logistics & warehousing · Retail & e-commerce
Workplace safetyLoading Dock Safety
Check truck position, wheel chocks and dock conditions to flag risky loading situations.
Logistics & warehousing · Manufacturing
Operational efficiencyAssembly Sequence Verification
Monitor the defined assembly sequence and flag missed or out-of-order steps.
Automotive · Manufacturing
Operational efficiencyCycle Time & Microstops
Measure station cycles and brief stops from video to reveal deviations in workflow.
Automotive · Manufacturing
Operational efficiencyMachine Utilization
Assess running and waiting periods visually and notify the relevant team of stops.
Manufacturing · Automotive
Operational efficiencyDock & Door Monitoring
Track vehicle arrivals, door use and loading progress in one workflow.
Logistics & warehousing · Manufacturing
Operational efficiencyFour-Side Pallet Scanning
Read labels across pallet faces during a pass and match them against the order list.
Logistics & warehousing · Retail & e-commerce · Food & beverage
Operational efficiencyDimensioning
Check carton and pallet dimensions with vision and laser measurement and create a record.
Logistics & warehousing · Retail & e-commerce
Operational efficiencyDamage Detection
Document carton, pallet and container damage with photographs at entry and exit points.
Logistics & warehousing · Retail & e-commerce · Manufacturing
Operational efficiencyInventory Counting
Read shelf and pallet labels to reveal empty locations and placement mismatches.
Logistics & warehousing · Retail & e-commerce · Manufacturing
Operational efficiencyLicense Plate & Container OCR
Read vehicle and container numbers and match them with appointment and shipment records.
Logistics & warehousing · Manufacturing
Operational efficiencyConveyor Jam Detection
Detect conveyor build-ups and jams and notify the person who can respond.
Logistics & warehousing · Manufacturing · Food & beverage
Facility monitoringGauge & Meter Reading
Read analog gauges from images, record values and notify teams of threshold exceptions.
Manufacturing · Energy & facilities
Facility monitoringMaintenance Rounds
Follow inspection points step by step and document findings with photographs and voice.
Manufacturing · Energy & facilities
Facility monitoringUnauthorized Entry
Monitor designated-area entry and tailgating and notify the security team.
Manufacturing · Logistics & warehousing · Retail & e-commerce
Facility monitoringEnvironmental Monitoring
Monitor visible emissions, dust and waste-sorting conditions through camera feeds.
Manufacturing · Energy & facilitiesFAQ
Questions, answered
Quick-Connect Verification is a quality control solution on Thread In Motion’s TIM INSPECT platform that verifies from VEGA-X images that hose and pipe quick connectors are fully seated. On NOK the glove alerts the operator and the PLC is signalled; each result is stored in the vehicle record.
With TIM INSPECT, Quick-Connect Verification works in four steps: 1) Connect and capture: The operator pushes the quick connector on and captures it with VEGA-X. The glove reaches the right angle together with the hand that makes the connection. 2) Assess the seating: The image goes to the server. TIM INSPECT first finds the connector, then checks whether it has fully engaged with its counterpart: OK or NOK. 3) Alert on NOK: If the connector is not fully seated, the glove vibrates. The signal goes to the PLC and the line stops; the operator fixes the connection and checks again. 4) Record each connection by vehicle: The image and result of the lower and upper connections are stored against the vehicle. The result appears on the smart screen on the line.
Components used: VEGA-X, TIM INSPECT software, server, smart screen and PLC integration. VEGA-X captures the image and TIM INSPECT returns OK or NOK on the server; the result reaches the smart screen on the line and the PLC. The same method applies to engine types where the connector sits in a different position.
The quick connector is first found in the image, then assessed for whether it has fully engaged with its counterpart. In a correct assembly the connector body reaches the stop on the pipe and the lock ring sits in place; in a faulty one a gap remains. The decision is returned as OK or NOK.
The connections sit under the vehicle and inside the engine bay, in tight spots with a restricted view, and a fixed camera’s view gets blocked from one vehicle to the next. The operator’s hand is already there: the hand that makes the connection brings VEGA-X to the right angle too.
In this deployment, yes. The NOK result goes to the PLC and the line stops, while the glove alerts the operator by vibration. The operator fixes the connection, checks again and the line moves on. The scope of the PLC connection is defined together for each line during setup.
The check follows straight on from the connecting motion; the operator does not walk to a separate station. In this deployment, process time went from 8 seconds to 4.
Yes. The lower and upper connections are checked separately, and the connector position depends on the engine type. In this deployment the same method was applied to the connections of two different engine types.

YOUR SITE
Let’s look at your connection points together.
Let’s assess feasibility together using your own sample OK and NOK images, then define the line integration and the results to measure from the start.
























