OPERATIONAL EFFICIENCY · CYCLE TIME
Measure every cycle, make brief stops visible.
Measure the real cycle time of every station and the brief stops nobody records, directly from camera feeds. When a station drifts from takt time or a build-up starts ahead of the line, the shift supervisor is notified on AXION with the station details.
Trusted by the world’s leading companies.
THE NEED ON THE FLOOR
A stopwatch measures once a year; a camera measures every cycle.
On most lines, cycle times are measured with a stopwatch a few times a year. Stops of a few seconds never reach a record, yet together they add up to a serious capacity loss. Which station is the bottleneck then becomes a matter of debate. TIM INSPECT watches the stations continuously and measures every cycle by itself.
- 01
See the real cycle time
The start and end of each cycle are determined from video. Measured times are compared with the planned times in the MES.
- 02
Learn about deviations within the shift
When a station exceeds takt time several cycles in a row or a build-up starts, the shift supervisor is notified with the station details.
- 03
See brief stops by type
Non-value-added time such as waiting, searching for material and walking is separated out and reported by station at the end of the day.
EXPLORE THE SITUATION
What happens when a station falls behind?
Choose a situation to see what the camera measures, how the notification reaches the shift supervisor and how the record closes.

Line 2 · Takt 38 s
- Station 346 s
- In a row3 cycles
Station three exceeds takt time for three cycles in a row; the rest of the line starts waiting for it.
The shift supervisor is notified on AXION with the station details, goes to the station and resolves the cause of the delay on the spot.
A run of cycles over takt is reported, not a single long cycle. The station’s cycle times are recorded.
Station 1Within taktStation 2Within taktStation 3Over taktStation 4Within takt

Notification: “Station 3 is running late. Last cycle 46 seconds.”
HOW IT WORKS
Watch. Measure. Notify on deviation.

Line 2
- Stations4
- Takt time38 s
- Plan sourceMES
Station 3 · latest cycles
- Cycle 21437 s
- Cycle 21538 s
- Cycle 21636 s
- Takt38 s


End of day · average cycle
- Station 137 s
- Station 238 s
- Station 344 s
- Station 436 s
Watch the stations
Fixed cameras watch the stations along the line. Measurements are mapped so they can be compared with the planned times in the MES.
SYSTEM, RECORD AND INTEGRATION
Compare measured time with planned time.
Cycles measured by the camera are compared with the planned times in the MES. Deviations and build-ups are reported within the shift; at the end of the day, the time breakdown and stop reasons are reported by station.

Line view
Continuous video from fixed cameras that see the stations.
- SourceFixed cameras
- CoverageStations along the line
- Components
- Fixed cameras
- TIM INSPECT software
- AXION
- MES connection
Every cycle is measured
Instead of a few measurements a year, every cycle of the shift is recorded.
Station-level reporting
Reports are prepared by station, not by individual.
Privacy-aware design
Zones and actions are observed, not identity; only the event moment is stored.
Review in one record a station’s cycle times through the day, the moments it exceeded takt time and the types of brief stops. Base the bottleneck discussion on measured data and follow the effect of improvement work station by station.
SOLUTION FILM
Cameras measure every cycle. AXION reports the deviation to the supervisor.

TIM INSPECT · EXPLORE SOLUTIONS
One platform. 35 applications.
Discover the next opportunity on your floor. Choose a solution area or industry and explore each application visually.
Operational efficiencyAssembly Sequence Verification
Monitor the defined assembly sequence and flag missed or out-of-order steps.
Automotive · Manufacturing
Operational efficiencyMachine Utilization
Assess running and waiting periods visually and notify the relevant team of stops.
Manufacturing · Automotive
Operational efficiencyDock & Door Monitoring
Track vehicle arrivals, door use and loading progress in one workflow.
Logistics & warehousing · Manufacturing
Operational efficiencyFour-Side Pallet Scanning
Read labels across pallet faces during a pass and match them against the order list.
Logistics & warehousing · Retail & e-commerce · Food & beverage
Operational efficiencyDimensioning
Check carton and pallet dimensions with vision and laser measurement and create a record.
Logistics & warehousing · Retail & e-commerce
Operational efficiencyDamage Detection
Document carton, pallet and container damage with photographs at entry and exit points.
Logistics & warehousing · Retail & e-commerce · Manufacturing
Operational efficiencyInventory Counting
Read shelf and pallet labels to reveal empty locations and placement mismatches.
Logistics & warehousing · Retail & e-commerce · Manufacturing
Operational efficiencyLicense Plate & Container OCR
Read vehicle and container numbers and match them with appointment and shipment records.
Logistics & warehousing · Manufacturing
Operational efficiencyConveyor Jam Detection
Detect conveyor build-ups and jams and notify the person who can respond.
Logistics & warehousing · Manufacturing · Food & beverage
Verification & qualityShipment & Crate Verification
Count passing crates, read their labels and match the load against the shipment list.
Automotive · Logistics & warehousing
Verification & qualityReturned Product Inspection
Identify returned products and record visual checks of damage, dates and product information.
Food & beverage · Retail & e-commerce · Logistics & warehousing
Verification & qualityVoice-Guided Final Inspection
Complete hands-free inspection steps and document findings with voice and photographs.
Automotive · Manufacturing
Verification & qualityAssembly Part Verification
Check parts, labels and surfaces during assembly and send the result to production systems.
Automotive · Manufacturing
Verification & qualityCargo Sortation & Pallet Verification
Verify outgoing cargo by checking shipping labels and pallet contents together.
Logistics & warehousing · Aviation
Verification & qualityMetal Part & Label Verification
Match stamped metal-part numbers with crate labels to verify product identity.
Automotive · Manufacturing
Verification & qualityQuick-Connect Verification
Visually check that assembly quick-connects are fully seated and record the result.
Automotive · Manufacturing
Verification & qualityVehicle Label Verification
Read vehicle-specific labels with OCR and compare them with expected production data.
Automotive · Manufacturing
Verification & qualityComponent Assembly Inspection
Visually verify the assembly of components such as retaining rings, washers and plugs.
Automotive · Manufacturing
Verification & qualityProduct & Carton Verification
Combine product, plug, label and carton-content checks before shipment.
Automotive · Manufacturing · Logistics & warehousing
Workplace safetyForklift–Pedestrian Safety
Analyze risky encounters from camera feeds and alert the people involved through AXION.
Manufacturing · Logistics & warehousing
Workplace safetyRestricted-Zone Detection
Detect entry into hazardous areas and alert the worker and responsible team.
Manufacturing · Construction
Workplace safetyPPE Detection
Check the use of helmets, vests and other protective equipment in working areas.
Manufacturing · Construction · Logistics & warehousing
Workplace safetyFire & Smoke Early Warning
Evaluate visible flame and smoke signs in camera feeds and notify the relevant team.
Manufacturing · Logistics & warehousing · Energy & facilities
Workplace safetySpill & Leak Detection
Detect unexpected liquid accumulation and leaks, and notify teams with location information.
Manufacturing · Food & beverage · Energy & facilities
Workplace safetyFallen or Motionless Person Detection
Detect falls or prolonged inactivity to support the assistance workflow.
Manufacturing · Logistics & warehousing · Energy & facilities
Workplace safetyErgonomics & Posture Analysis
Analyze lifting, bending and reaching movements to make risky postures visible.
Manufacturing · Logistics & warehousing
Workplace safetyWorking-at-Height Safety
Use visual checks to assess harness attachment, scaffolding and ladder use.
Construction · Energy & facilities · Manufacturing
Workplace safetyLockout/Tagout Verification
Verify isolation steps with photographs to manage checks before maintenance.
Manufacturing · Energy & facilities
Workplace safetyEmergency Exit & Route Monitoring
Detect obstructions blocking emergency exits and access routes through camera feeds.
Manufacturing · Logistics & warehousing · Retail & e-commerce
Workplace safetyLoading Dock Safety
Check truck position, wheel chocks and dock conditions to flag risky loading situations.
Logistics & warehousing · Manufacturing
Facility monitoringGauge & Meter Reading
Read analog gauges from images, record values and notify teams of threshold exceptions.
Manufacturing · Energy & facilities
Facility monitoringMaintenance Rounds
Follow inspection points step by step and document findings with photographs and voice.
Manufacturing · Energy & facilities
Facility monitoringUnauthorized Entry
Monitor designated-area entry and tailgating and notify the security team.
Manufacturing · Logistics & warehousing · Retail & e-commerce
Facility monitoringEnvironmental Monitoring
Monitor visible emissions, dust and waste-sorting conditions through camera feeds.
Manufacturing · Energy & facilitiesFAQ
Questions, answered
Cycle Time & Microstops is an operational efficiency solution on Thread In Motion’s TIM INSPECT platform that measures station cycle times and unrecorded brief stops from fixed camera feeds. Takt deviations and build-ups reach the shift supervisor’s AXION with the station details, and stop reasons are reported by station.
With TIM INSPECT, Cycle Time & Microstops works in four steps: 1) Watch the stations: Fixed cameras watch the stations along the line. Measurements are mapped so they can be compared with the planned times in the MES. 2) Measure every cycle: TIM INSPECT determines the start and end of each cycle by itself and separates waiting, searching for material and walking time. 3) Notify on deviation: When a station exceeds takt time several cycles in a row or a build-up starts, the shift supervisor is notified on AXION. 4) Report at the end of the day: At the end of the day, the time breakdown and stop reasons are reported by station. The data feeds continuous improvement work.
Components used: fixed cameras, TIM INSPECT software, AXION and MES connection. Cycles measured by the camera are compared with the planned times in the MES. Deviations and build-ups are reported within the shift; at the end of the day, the time breakdown and stop reasons are reported by station.
No. Measurement and reporting are done by station, not by individual. The aim is not to compare workers but to make bottlenecks, build-ups and non-value-added time visible. We recommend introducing the solution together with employee representatives.
Privacy is designed in from the start of the deployment. Zones and actions are observed, not identity; images are filtered and only the event moment is stored. The design follows KVKK and GDPR requirements.
The start and end of each cycle, non-value-added time such as waiting, searching for material and walking, build-ups between stations and deviation from takt time are measured. The scope is finalised around the camera angles that cover the stations.
When a station exceeds takt time several cycles in a row or a build-up starts ahead of the line, the shift supervisor is notified on AXION with the station details. A single long cycle does not trigger a notification; thresholds are set together during the pilot.
Cycle times measured from video are compared with the planned times in the MES. The gap between planned and actual becomes visible by station and provides data for continuous improvement work.

YOUR SITE
Let’s discuss your bottleneck with measurements in hand.
Let’s review your stations, takt time and camera views together, then define the pilot scope and the metrics to measure at the end of the pilot from the start.
























