FACILITY MONITORING · ENVIRONMENT
See it on your own camera, before a complaint arrives.
Monitor the colour and density of stack smoke, dust drift in open areas and the correct sorting of waste by camera. When something is out of the ordinary, send the person responsible a notification on AXION with the image.
Trusted by the world’s leading companies.
THE NEED ON THE FLOOR
Do not learn about unusual smoke from outside.
Visible emissions and waste management are among the topics questioned most often in environmental audits. Unusual smoke or dust is often first reported through a complaint from outside, and the wrong material in a waste bin disrupts recycling. TIM INSPECT monitors these topics by camera and reports deviations from normal to the person responsible.
- 01
Define what normal looks like
Set the usual appearance for each stack and area. Cameras watch continuously and flag the situation when smoke colour or density deviates from that definition.
- 02
Alert the owner with an image
When something is out of the ordinary, the environment officer and the line supervisor concerned receive a notification on AXION with the image.
- 03
Correct waste at the source
When the wrong type of material goes into a waste bin, the worker’s AXION alerts at that moment. Spilled or overflowing waste is monitored as well.
EXPLORE THE SITUATION
What happens when something deviates from normal?
Pick one of three situations. The topic being monitored, the person alerted and what goes into the environmental record change together.

Stack 2 · visible emission
- ColourDark
- DensityHigh
- Duration4 min
The smoke from a stack turns darker and its density moves outside the defined normal state.
The environment officer and the line supervisor concerned receive a notification on AXION with the image, and assess the situation at the source.
The event image and duration are recorded. The image does not replace statutory emission measurement; it serves early warning and internal audits.
Stack smokeNot normalDust and driftNormalWaste sortingNormalSpilled, overflowing wasteNormal

Notification: “Stack 2: smoke has turned darker. Image attached.”
HOW IT WORKS
Define. Monitor. Alert on deviation.
Normal state · Stack 1
- ColourLight
- DensityNormal

Compared with normal
- ColourDark
- DensityRising



Event record
- ImageStored
- Duration11 min
- Env. reportAdded
Define the normal state
The usual appearance is set for each stack and open area: smoke colour, density and the type of each waste bin.
SYSTEM AND RECORD
Bring image, duration and alert into one event record.
The definition of normal, the camera’s detection and the notification to the owner come together in one workflow. Event records feed into environmental management reports. Camera images do not replace statutory emission measurement; they are used for early warning and internal audits.

Stack and site view
Images from fixed cameras that see the stacks, open areas and waste points.
- SourceFixed cameras
- CoverageStack · open area · waste
- Components
- Fixed cameras
- TIM INSPECT software
- AXION
- Environmental management reports
Early warning
Learn about unusual smoke or dust from your own camera, before a complaint.
Records for internal audits
Keep the image and duration of every event for internal audits.
Sorting at the source
Tell the worker at that moment when waste goes into the wrong bin.
Review in one record, with its image, at which stack or area an event started, how long it lasted and who was informed. See recurring events by location and prepare for environmental audits with your own records.
SOLUTION FILM
The camera sees the deviation. AXION tells the person responsible.

TIM INSPECT · EXPLORE SOLUTIONS
One platform. 35 applications.
Discover the next opportunity on your floor. Choose a solution area or industry and explore each application visually.
Facility monitoringGauge & Meter Reading
Read analog gauges from images, record values and notify teams of threshold exceptions.
Manufacturing · Energy & facilities
Facility monitoringMaintenance Rounds
Follow inspection points step by step and document findings with photographs and voice.
Manufacturing · Energy & facilities
Facility monitoringUnauthorized Entry
Monitor designated-area entry and tailgating and notify the security team.
Manufacturing · Logistics & warehousing · Retail & e-commerce
Verification & qualityShipment & Crate Verification
Count passing crates, read their labels and match the load against the shipment list.
Automotive · Logistics & warehousing
Verification & qualityReturned Product Inspection
Identify returned products and record visual checks of damage, dates and product information.
Food & beverage · Retail & e-commerce · Logistics & warehousing
Verification & qualityVoice-Guided Final Inspection
Complete hands-free inspection steps and document findings with voice and photographs.
Automotive · Manufacturing
Verification & qualityAssembly Part Verification
Check parts, labels and surfaces during assembly and send the result to production systems.
Automotive · Manufacturing
Verification & qualityCargo Sortation & Pallet Verification
Verify outgoing cargo by checking shipping labels and pallet contents together.
Logistics & warehousing · Aviation
Verification & qualityMetal Part & Label Verification
Match stamped metal-part numbers with crate labels to verify product identity.
Automotive · Manufacturing
Verification & qualityQuick-Connect Verification
Visually check that assembly quick-connects are fully seated and record the result.
Automotive · Manufacturing
Verification & qualityVehicle Label Verification
Read vehicle-specific labels with OCR and compare them with expected production data.
Automotive · Manufacturing
Verification & qualityComponent Assembly Inspection
Visually verify the assembly of components such as retaining rings, washers and plugs.
Automotive · Manufacturing
Verification & qualityProduct & Carton Verification
Combine product, plug, label and carton-content checks before shipment.
Automotive · Manufacturing · Logistics & warehousing
Workplace safetyForklift–Pedestrian Safety
Analyze risky encounters from camera feeds and alert the people involved through AXION.
Manufacturing · Logistics & warehousing
Workplace safetyRestricted-Zone Detection
Detect entry into hazardous areas and alert the worker and responsible team.
Manufacturing · Construction
Workplace safetyPPE Detection
Check the use of helmets, vests and other protective equipment in working areas.
Manufacturing · Construction · Logistics & warehousing
Workplace safetyFire & Smoke Early Warning
Evaluate visible flame and smoke signs in camera feeds and notify the relevant team.
Manufacturing · Logistics & warehousing · Energy & facilities
Workplace safetySpill & Leak Detection
Detect unexpected liquid accumulation and leaks, and notify teams with location information.
Manufacturing · Food & beverage · Energy & facilities
Workplace safetyFallen or Motionless Person Detection
Detect falls or prolonged inactivity to support the assistance workflow.
Manufacturing · Logistics & warehousing · Energy & facilities
Workplace safetyErgonomics & Posture Analysis
Analyze lifting, bending and reaching movements to make risky postures visible.
Manufacturing · Logistics & warehousing
Workplace safetyWorking-at-Height Safety
Use visual checks to assess harness attachment, scaffolding and ladder use.
Construction · Energy & facilities · Manufacturing
Workplace safetyLockout/Tagout Verification
Verify isolation steps with photographs to manage checks before maintenance.
Manufacturing · Energy & facilities
Workplace safetyEmergency Exit & Route Monitoring
Detect obstructions blocking emergency exits and access routes through camera feeds.
Manufacturing · Logistics & warehousing · Retail & e-commerce
Workplace safetyLoading Dock Safety
Check truck position, wheel chocks and dock conditions to flag risky loading situations.
Logistics & warehousing · Manufacturing
Operational efficiencyAssembly Sequence Verification
Monitor the defined assembly sequence and flag missed or out-of-order steps.
Automotive · Manufacturing
Operational efficiencyCycle Time & Microstops
Measure station cycles and brief stops from video to reveal deviations in workflow.
Automotive · Manufacturing
Operational efficiencyMachine Utilization
Assess running and waiting periods visually and notify the relevant team of stops.
Manufacturing · Automotive
Operational efficiencyDock & Door Monitoring
Track vehicle arrivals, door use and loading progress in one workflow.
Logistics & warehousing · Manufacturing
Operational efficiencyFour-Side Pallet Scanning
Read labels across pallet faces during a pass and match them against the order list.
Logistics & warehousing · Retail & e-commerce · Food & beverage
Operational efficiencyDimensioning
Check carton and pallet dimensions with vision and laser measurement and create a record.
Logistics & warehousing · Retail & e-commerce
Operational efficiencyDamage Detection
Document carton, pallet and container damage with photographs at entry and exit points.
Logistics & warehousing · Retail & e-commerce · Manufacturing
Operational efficiencyInventory Counting
Read shelf and pallet labels to reveal empty locations and placement mismatches.
Logistics & warehousing · Retail & e-commerce · Manufacturing
Operational efficiencyLicense Plate & Container OCR
Read vehicle and container numbers and match them with appointment and shipment records.
Logistics & warehousing · Manufacturing
Operational efficiencyConveyor Jam Detection
Detect conveyor build-ups and jams and notify the person who can respond.
Logistics & warehousing · Manufacturing · Food & beverageFAQ
Questions, answered
Environmental Monitoring is a facility monitoring solution on Thread In Motion’s TIM INSPECT platform that compares stack smoke, dust drift and waste sorting in fixed camera images with a defined normal state. Deviations reach the environment officer and line supervisor on AXION with an image and are recorded.
With TIM INSPECT, Environmental Monitoring works in four steps: 1) Define the normal state: The usual appearance is set for each stack and open area: smoke colour, density and the type of each waste bin. 2) Monitor and spot deviations: Cameras continuously watch smoke colour and density, dust clouds and waste bins. Deviations from the definition are detected. 3) Alert the person concerned: The environment officer and the line supervisor are alerted on AXION with the image. A worker who uses the wrong bin is alerted at that moment. 4) Record the event and its duration: The event image and duration are recorded. The records feed into environmental management reports.
Components used: fixed cameras, TIM INSPECT software, AXION and environmental management reports. The definition of normal, the camera’s detection and the notification to the owner come together in one workflow. Event records feed into environmental management reports. Camera images do not replace statutory emission measurement; they are used for early warning and internal audits.
No. Camera images do not replace statutory emission measurement. This scenario is for early warning and internal audits: the colour and density of visible smoke are monitored and unusual situations are reported to the person responsible.
Yes. Weather conditions such as fog and rain affect the assessment of smoke. Camera position and the definition of normal are set for the site during setup, and these limits are addressed together within the pilot scope.
The colour and density of stack smoke, dust clouds in open areas, the type of material put into a waste bin, and spilled or overflowing waste are within the scope of this scenario. The scope depends on the camera views.
When something is out of the ordinary, the environment officer and the line supervisor concerned receive a notification on AXION with the image. When the wrong material goes into a waste bin, the AXION of the worker concerned alerts at that moment.
In every scenario that involves people, privacy is designed in from the start. Zones and behaviour are monitored, not identity. Images are filtered and only the event moment is stored. The setup follows KVKK and GDPR requirements.

YOUR SITE
Define the normal state for your stacks and waste points.
Let’s decide together which stacks, open areas and waste points to monitor, then define the pilot scope and the three metrics to measure from the start.
























