Get a demo
Close-up greyscale view of the snap ring inspection point: two edges and a hole

AUTOMOTIVE · COMPONENT ASSEMBLY INSPECTION

Verify by hand what a camera cannot see.

Capture small components such as snap rings, horseshoe washers and plugs with the VEGA-X smart glove. TIM INSPECT returns an OK or NOK decision for every photo; the result reaches the worker within seconds and is written to SAP.

Discuss assembly inspection
Move the lens to see what the camera sees

Trusted by the world’s leading companies.

Sürat KargoÇimsa
Brisa
Togg
Eti
Arçelik
Yusen Logistics
CEVA Logistics
Aramex
Kühne + Nagel
CarrefourMercedes-Benz
Coca-Cola
Toyota
Renault
Honda
Ford
Stellantis
BSH
Daikin
DiageoLactalis
MANN+HUMMEL
Viessmann
Sika

Results from an automotive supplier deployment

12.8 million+
Inspections
0
Defective parts reaching the customer
<4 s
Per inspection

Results for this deployment are based on the Thread In Motion project report.

THE NEED ON THE FLOOR

Verify small parts on every product.

Snap rings, horseshoe washers and plugs sit inside the assembly and are hard to check quickly by eye. The background behind the product keeps changing and the inspection points stay hidden inside the part, so a fixed camera cannot see them. If one is missing or not seated, the defect can travel all the way to the field.

  • 01

    Take the camera to the inspection point

    VEGA-X sits on the worker’s hand. It captures every point the hand can reach, up close and at the right angle, without carrying the part to a camera.

  • 02

    Catch the defect at its own station

    If a part is missing or not seated in its groove, the glove vibrates. The NOK result is written to the system and the part does not move on.

  • 03

    Keep evidence for every inspection

    Each part is recorded with its part code, traceability code, result, date and time, and evidence photo.

EXPLORE THE SITUATION

What happens when a part is missing or not seated?

Choose a situation to see what is evaluated in the glove’s photo, who receives the result and how the record closes.

Snap ring inspection point showing the hole and a single edge
Hole ✓
Edge ✓
Snap ring check
  • Hole1 / 1
  • Edges1 / 2
  • ResultNOK
VEGA-X photo · snap ring
SituationSnap ring NOK

The worker holds a hand to the snap ring point and VEGA-X takes the photo. The hole is found, but only one of the two snap ring edges is detected.

Response on the floor

The glove vibrates, so the worker learns of the defect without letting go of the part. The snap ring is seated and the same point is photographed again.

System decision

Because both edges and the hole were not detected together, the decision is NOK. It is written to SAP and the part does not move on.

Checklist for the part
Snap ringNOK
Horseshoe washerNext
PlugNext
3Checks
0Passed
1Failed
VEGA-X feedback
VEGA-X · Operator · VEGA-X
NOKSnap ring not seated
Operator · VEGA-X

The glove vibrates and the light turns red. VEGA-X screen: “Snap ring NOK, part held at the station.”

NOK record open · part does not move on

HOW IT WORKS

Scan. Capture. Get the result in hand.

Barcode scanned
  • Part codePK-20418
  • TraceabilityIZ-0048213
  • Checks0 / 3
Part identification
Two edges and the hole marked on the snap ring image
Edge
Hole
Edge
Check 1 / 3
  • Snap ringSeated
Inspection point image
VEGA-X
NOKSnap ring · part on hold
NOK notification
Housing after inspection with the part record on screen
Part record
  • Part codePK-20418
  • TraceabilityIZ-0048213
  • Checks3 / 3
  • Evidence photos3
  • SAPWritten
Record and SAP
01 / 04

Scan the barcode

The worker scans the part’s barcode with VEGA-X. The part is identified by its part code and traceability code.

SYSTEM, RECORD AND INTEGRATION

One workflow from barcode to SAP record.

Barcode scanning, image analysis, feedback to the worker and the system record come together in one workflow. Results are written to SAP per part, and the evidence photo of every inspection is kept in the management panel.

Inspection point photo taken with the glove
01 / 04

Barcode and photo

VEGA-X scans the barcode and photographs the inspection points.

  • DeviceVEGA-X smart glove
  • Inspection pointsSnap ring · washer · plug
    Components
  • VEGA-X smart glove
  • TIM INSPECT software
  • Management panel
  • SAP integration
  • Our own AI models

    Decisions come from Thread In Motion models trained on industrial data.

  • Results without a screen

    The worker reads the result from the vibration; both hands stay on the part.

  • Traceability for every part

    When a complaint arrives, find the inspection photo and time for that part.

See the part code, traceability code, result, date and time, and evidence photo for every part in one record. Search the records, filter by date and export to Excel; the same list also shows how many times a part was reworked.

APPLICATION FILM

The glove captures. TIM INSPECT decides.

English narration · horizontal 16:9

TIM INSPECT · EXPLORE SOLUTIONS

One platform. 35 applications.

Discover the next opportunity on your floor. Choose a solution area or industry and explore each application visually.

35 solutions
Verification & quality

Shipment & Crate Verification

Count passing crates, read their labels and match the load against the shipment list.

Automotive · Logistics & warehousing
Verification & quality

Returned Product Inspection

Identify returned products and record visual checks of damage, dates and product information.

Food & beverage · Retail & e-commerce · Logistics & warehousing
Verification & quality

Voice-Guided Final Inspection

Complete hands-free inspection steps and document findings with voice and photographs.

Automotive · Manufacturing
Verification & quality

Assembly Part Verification

Check parts, labels and surfaces during assembly and send the result to production systems.

Automotive · Manufacturing
Verification & quality

Cargo Sortation & Pallet Verification

Verify outgoing cargo by checking shipping labels and pallet contents together.

Logistics & warehousing · Aviation
Verification & quality

Metal Part & Label Verification

Match stamped metal-part numbers with crate labels to verify product identity.

Automotive · Manufacturing
Verification & quality

Quick-Connect Verification

Visually check that assembly quick-connects are fully seated and record the result.

Automotive · Manufacturing
Verification & quality

Vehicle Label Verification

Read vehicle-specific labels with OCR and compare them with expected production data.

Automotive · Manufacturing
Verification & quality

Product & Carton Verification

Combine product, plug, label and carton-content checks before shipment.

Automotive · Manufacturing · Logistics & warehousing
Workplace safety

Forklift–Pedestrian Safety

Analyze risky encounters from camera feeds and alert the people involved through AXION.

Manufacturing · Logistics & warehousing
Workplace safety

Restricted-Zone Detection

Detect entry into hazardous areas and alert the worker and responsible team.

Manufacturing · Construction
Workplace safety

PPE Detection

Check the use of helmets, vests and other protective equipment in working areas.

Manufacturing · Construction · Logistics & warehousing
Workplace safety

Fire & Smoke Early Warning

Evaluate visible flame and smoke signs in camera feeds and notify the relevant team.

Manufacturing · Logistics & warehousing · Energy & facilities
Workplace safety

Spill & Leak Detection

Detect unexpected liquid accumulation and leaks, and notify teams with location information.

Manufacturing · Food & beverage · Energy & facilities
Workplace safety

Fallen or Motionless Person Detection

Detect falls or prolonged inactivity to support the assistance workflow.

Manufacturing · Logistics & warehousing · Energy & facilities
Workplace safety

Ergonomics & Posture Analysis

Analyze lifting, bending and reaching movements to make risky postures visible.

Manufacturing · Logistics & warehousing
Workplace safety

Working-at-Height Safety

Use visual checks to assess harness attachment, scaffolding and ladder use.

Construction · Energy & facilities · Manufacturing
Workplace safety

Lockout/Tagout Verification

Verify isolation steps with photographs to manage checks before maintenance.

Manufacturing · Energy & facilities
Workplace safety

Emergency Exit & Route Monitoring

Detect obstructions blocking emergency exits and access routes through camera feeds.

Manufacturing · Logistics & warehousing · Retail & e-commerce
Workplace safety

Loading Dock Safety

Check truck position, wheel chocks and dock conditions to flag risky loading situations.

Logistics & warehousing · Manufacturing
Operational efficiency

Assembly Sequence Verification

Monitor the defined assembly sequence and flag missed or out-of-order steps.

Automotive · Manufacturing
Operational efficiency

Cycle Time & Microstops

Measure station cycles and brief stops from video to reveal deviations in workflow.

Automotive · Manufacturing
Operational efficiency

Machine Utilization

Assess running and waiting periods visually and notify the relevant team of stops.

Manufacturing · Automotive
Operational efficiency

Dock & Door Monitoring

Track vehicle arrivals, door use and loading progress in one workflow.

Logistics & warehousing · Manufacturing
Operational efficiency

Four-Side Pallet Scanning

Read labels across pallet faces during a pass and match them against the order list.

Logistics & warehousing · Retail & e-commerce · Food & beverage
Operational efficiency

Dimensioning

Check carton and pallet dimensions with vision and laser measurement and create a record.

Logistics & warehousing · Retail & e-commerce
Operational efficiency

Damage Detection

Document carton, pallet and container damage with photographs at entry and exit points.

Logistics & warehousing · Retail & e-commerce · Manufacturing
Operational efficiency

Inventory Counting

Read shelf and pallet labels to reveal empty locations and placement mismatches.

Logistics & warehousing · Retail & e-commerce · Manufacturing
Operational efficiency

License Plate & Container OCR

Read vehicle and container numbers and match them with appointment and shipment records.

Logistics & warehousing · Manufacturing
Operational efficiency

Conveyor Jam Detection

Detect conveyor build-ups and jams and notify the person who can respond.

Logistics & warehousing · Manufacturing · Food & beverage
Facility monitoring

Gauge & Meter Reading

Read analog gauges from images, record values and notify teams of threshold exceptions.

Manufacturing · Energy & facilities
Facility monitoring

Maintenance Rounds

Follow inspection points step by step and document findings with photographs and voice.

Manufacturing · Energy & facilities
Facility monitoring

Unauthorized Entry

Monitor designated-area entry and tailgating and notify the security team.

Manufacturing · Logistics & warehousing · Retail & e-commerce
Facility monitoring

Environmental Monitoring

Monitor visible emissions, dust and waste-sorting conditions through camera feeds.

Manufacturing · Energy & facilities

FAQ

Questions, answered

Component Assembly Inspection is a quality control solution on Thread In Motion’s TIM INSPECT platform that checks small components such as snap rings, washers and plugs in photos taken with the VEGA-X smart glove. On NOK the glove vibrates and the part is held; results are written to SAP.

With TIM INSPECT, Component Assembly Inspection works in four steps: 1) Scan the barcode: The worker scans the part’s barcode with VEGA-X. The part is identified by its part code and traceability code. 2) Capture the inspection points: The worker holds a hand to the snap ring, washer and plug points in turn; VEGA-X photographs each one. 3) Get the result instantly: TIM INSPECT decides OK or NOK; the result returns to the glove as vibration, sound and light and is added to the part record. 4) Write the record: The result is written to the panel and SAP together with its evidence photo. A part with a NOK does not move on.

Components used: VEGA-X smart glove, TIM INSPECT software, management panel and SAP integration. Barcode scanning, image analysis, feedback to the worker and the system record come together in one workflow. Results are written to SAP per part, and the evidence photo of every inspection is kept in the management panel.

The inspection points sit inside the part and the background behind the product changes with every shot, so a fixed camera cannot see them reliably. VEGA-X is on the worker’s hand and captures the point the hand reaches, up close and at the right angle.

No. VEGA-X scans the barcode, takes the photo and tells the worker the result; it does not decide. The OK or NOK decision is made by TIM INSPECT with Thread In Motion’s own models, trained on industrial data.

The commitment for VEGA-X is under 4 seconds end to end, from photo to feedback. The worker does not have to look at a screen; the result comes as a vibration and both hands stay on the part.

The images are very close-up greyscale shots taken in conditions with glare, oil and shadows. The models are trained on industrial images of this kind. For a new part, the scope is assessed together using sample images from your floor.

In this deployment results are written to SAP per part, and NOK results follow the same path. Depending on what you use, TIM INSPECT can connect to SAP, MES, ERP, WMS or PLC systems. The scope is agreed before installation.

YOUR SITE

Let’s define your inspection points together.

Let’s review your parts, your inspection points and the system that should receive the result, then define the pilot scope and the results to measure from the start.

Request a solution discussioninfo@threadinmotion.com
Chat on WhatsApp WhatsApp'tan yazın