Get a demo

Truck Waiting Time at the Dock: How to Track It With Cameras

6 min read
Dock cameras tracking truck arrivals and loading progress at warehouse doors

The most reliable way to track truck waiting time at the dock is to record it automatically, door by door, instead of relying on handwritten lists. Cameras over the dock doors can detect when a truck arrives, which door it docks at, how far loading has progressed and when it leaves, then compare all of it with the shipment plan. Dock and door monitoring in TIM INSPECT turns those observations into a time record backed by video.

For shipping teams the dock is where plans meet reality. Trucks arrive early or late, dock at the wrong door, or wait while a load is still being staged. This guide looks at why dock time is so hard to track, what the usual methods miss and how camera-based monitoring makes the flow at each door visible without walking the yard.

Why truck waiting time at the dock causes so much friction

At many sites, which truck waited at which door, and for how long, is tracked by hand: a clipboard at the gatehouse, a spreadsheet updated when someone has a minute. That works until a carrier disputes a waiting time or a detention charge. Then each side has its own version, and neither can show what actually happened.

Inside the building the problem is visibility. Whether loading at door 4 is half done or barely started can only be seen by walking down to the dock. A truck docking at the wrong door can go unnoticed until the wrong goods are loaded or the right ones are waiting at another door. Planning the next arrivals without knowing which doors will be free soon is guesswork.

How dock activity is usually tracked

  • Gatehouse logs. They record arrival at the site, not arrival at the door, and say nothing about loading progress.
  • Yard and dock scheduling tools. Appointment systems plan the slots well, but the actual times still need someone to enter them.
  • Door sensors. A sensor can tell whether a door is open. It cannot tell which truck is there, whether it is the planned one, or how much has been loaded.
  • Radio calls and walking the dock. The shipping supervisor learns about problems when someone reports them or when they happen to pass by.

Each method covers a slice. What is missing is a single record linking the plan, the door and the time.

How dock door monitoring works with cameras

The TIM INSPECT dock and door scenario follows four steps.

1. Get the shipment plan

The plan comes from SAP or the warehouse management system: which truck, which door, how much time for loading and how many pallets.

2. Track arrival and loading

Dock cameras detect the moment a truck arrives at a door and leaves it, and whether each door is occupied or free. Loading progress is followed pallet by pallet: the number of pallets loaded and the fill level of the trailer are tracked and compared with the time in the plan.

3. Alert the shipping supervisor

If a truck docks at the wrong door or loading runs past the planned time, a notification goes to the shipping supervisor's AXION, for example: "Truck at the wrong door. Planned door: 2." The supervisor directs the driver to the right door; the notification stays open until the deviation is resolved.

4. Record the times

Arrival, waiting and loading times for each truck are recorded with video. The same records feed the carrier performance report, so discussions about waiting times can be based on evidence rather than memory.

Where cameras are already installed for shipment and crate verification, this scenario can run on the same cameras. How well they cover the doors and docking area is reviewed before installation.

What to consider before installation

Camera coverage of doors and trailers

Each camera needs to see the door, the docking position and, for loading progress, enough of the trailer interior. What can be seen, and in how much detail, depends on the camera angle and on how trucks are loaded. Side-loaded curtain trailers and rear-loaded box trailers look very different on camera. The scope is defined together on site before the pilot.

Lighting and weather

Dock doors face outdoor light that changes through the day. Glare at the door opening, darkness inside a trailer and rain or fog outside all affect image quality. Plan camera placement and, if needed, additional lighting with this in mind.

Integration with SAP or the WMS

The comparison is only as good as the plan it uses. Agree early which fields come from the source system (truck, door, planned duration, pallet count) and how often they are updated when plans change during the day.

Drivers and workers in view

Dock cameras inevitably see drivers and warehouse staff. The system monitors zones and behaviour, not identity. Images are filtered and only the event moment is stored, and privacy is designed in from the start in line with GDPR and local requirements.

Setting metrics before the pilot

This is a solution scenario, not a promise of a specific improvement figure. Decide at the start what you want to measure in the pilot, such as waiting time per carrier, door occupancy or the number of wrong-door events, so the results can be judged against a baseline.

Dock doors are also a safety hotspot. If truck position, wheel chocks or dock conditions are a concern, the related loading dock safety scenario covers that side. Both are part of the TIM INSPECT platform.

FAQ

Can dock door monitoring use our existing cameras?

At sites with a shipment verification setup it can run on the same cameras. Coverage of the doors and docking area is checked together before installation.

Which system does the shipment plan come from?

SAP or the warehouse management system. The integration scope is agreed before installation.

How is loading progress tracked?

The camera follows the number of pallets loaded and the trailer fill level. The level of detail depends on camera angle and loading method.

What results can we expect?

The page and this guide describe a scenario and do not quote proven result figures. Pilot metrics such as waiting time or door use are defined together at the start.

Next step

To make the flow at your own doors visible, request a demo and we will review your door count, plan source and existing cameras together.

Share this article LinkedIn X
Written by Ece Tanışık
Thread in Motion

See TIM on your own floor

Wearable scanners, Physical AI wearables and vision AI for frontline operations. Let us show you how they fit your process.

Get a demo

Keep reading

Chat on WhatsApp WhatsApp'tan yazın