Lone worker fall detection is about one thing: making sure a person who falls or stops moving while working alone gets help in the first minutes, not at the end of the shift. With vision AI, fixed cameras detect a fall, a person lying on the floor or unusually long inactivity; the person's own wearable first asks "Are you OK?", and only if there is no answer does a help call with the location go to the nearest colleagues. You can see the full flow on the Fallen or Motionless Person Detection page.
Night shifts, the back of a large warehouse, plant rooms and maintenance areas all have one thing in common: people are often on their own there. If something goes wrong, nobody is close enough to see it.
Why falls during lone working are noticed too late
When someone slips, faints or is struck by an object in a busy area, colleagues react within seconds. In a quiet aisle at 3 a.m., the same event can go unseen until a supervisor wonders why a task has not been confirmed or a radio call goes unanswered. Yet the first minutes after a fall are decisive for help.
Regulators recognise this. The UK Health and Safety Executive's guidance on protecting lone workers asks employers to assess the risks of working without close supervision and to have a way of keeping in touch and responding to emergencies. The question for most sites is not whether they need such a system but how to make it work without constant check-in calls.
Common lone worker safety methods and their gaps
- Scheduled check-ins: the worker calls or messages at fixed intervals. A fall right after a check-in may go unnoticed for the whole interval.
- Buddy systems: effective, but they double staffing for tasks that one person could do and are hard to keep up across every shift.
- Panic buttons: they only work if the person is conscious and able to press them.
- Man-down sensors in devices: they detect a change in device orientation or movement, but they depend on the device being carried correctly and can trigger whenever it is set down.
- CCTV monitoring: cameras are already there, but nobody can watch dozens of screens all night.
The common gap is that either the person has to act, or someone else has to be watching. Vision AI closes that gap by letting the existing cameras watch for the event itself.
How vision AI detects a fallen or motionless person
On the TIM INSPECT platform, fallen person detection follows a "detect, ask, call" logic designed to avoid unnecessary alarms:
- Detect a fall or inactivity. Fixed cameras covering lone-working areas detect a fall movement, a person lying on the floor and unusually long inactivity. The system monitors the person's status, not their identity.
- Ask the person first. The person's own AXION wearable vibrates and asks "Are you OK?". Someone taking a break or working on the floor simply confirms, and no help call goes out.
- Call the nearest people if there is no answer. If no confirmation comes, a help call with the location goes to the AXION devices of the nearest workers and the person in charge. Who receives the call follows your site's emergency call chain.
- Record the event and the time. The event footage and the response time are recorded. No health data is kept; only the event record is stored.
The confirmation step is what makes the system practical. Breaks and floor-level maintenance work can look like inactivity on camera; asking the person first sorts these out before anyone is disturbed. When the call does go out, it tells the responders exactly where to go.
What the record shows
Each event leaves one record: where and when it was detected, whether the person confirmed, who the call reached and how long help took to arrive. Looking at response times by area helps you review how lone working is organised, for example which zones are too far from the nearest colleague at night.
What to consider before installation
Choose the right areas first
Start with places where people really are alone: night-shift zones, the back of the warehouse, plant rooms and maintenance areas. The scope is planned around camera views on site and how workers use AXION on those shifts.
Camera coverage
The camera must see the floor of the working area, including the ends of aisles and the space behind equipment. Blind spots behind racking or machines are where a fallen person is hardest to see, so they deserve attention during the site walk.
Define the call chain before go-live
The help call is only as good as the chain behind it. Agree who is first, who is second, what happens if the nearest colleague is also busy and how the person in charge closes the event. These rules are configured around your existing emergency procedure rather than replacing it.
Privacy and trust
Workers will ask whether they are being watched all the time. The answer should be clear: the system monitors areas and behaviour, not who a person is; images are filtered and only the event moment is stored; no health data is kept. Privacy is designed in from the start in line with GDPR and KVKK. Explaining this openly, together with worker representatives, makes adoption much easier.
If your lone-working areas also include ladders, platforms or mezzanines, it is worth looking at Working-at-Height Safety at the same time, since many serious falls start there.
FAQ
Will someone on a break or working on the floor trigger an alarm?
It can look like a fall or inactivity on camera. That is why the person's own AXION asks first; if they are fine, they confirm and no help call is sent.
What happens if the person does not answer?
A help call with the location goes to the AXION devices of the nearest workers and the person in charge, following your site's emergency call chain.
Is any health data stored?
No. Only the event record is stored, containing the event footage and the response time.
Where is fallen person detection most useful?
Wherever people work alone: night shifts, the back of the warehouse and maintenance areas come first.
Next step
To review your lone-working areas, shift patterns and call chain with our team, request a demo; the solution page shows each step of the workflow in more detail.