Vehicle label verification means confirming that every label on a finished vehicle carries the right values for that specific vehicle, not just that a label is present. The most reliable way to do it at line speed is to read each label's text with OCR and compare it field by field with the vehicle's MES record, holding the vehicle the moment a value does not match. That is the approach behind TIM INSPECT Vehicle Label Verification, which puts the camera on the operator's hand instead of on a fixed stand.
A finished vehicle carries a set of labels that belong to it and to no other vehicle: the chassis number on the windshield, the weight label on the door pillar, the towing label in the trunk, the tyre pressure label inside the driver's door and the refrigerant label under the hood. The values on those labels change with the variant, the engine, the equipment and the target market. Two cars that look identical on the line can need different labels.
That is what makes the error hard to see. A label taken from the vehicle in front looks perfectly correct; only one number on it is wrong. Many of these labels are regulated. In the United States, for example, manufacturers must attach a certification label under 49 CFR Part 567, and other markets have their own type-approval rules. A wrong label on the wrong vehicle is therefore both a legal issue and a quality issue, and once the vehicle has left the plant, fixing it means tracing, recalling and reworking.
The common gap is the comparison. Seeing a label is not enough; each field has to be checked against what this particular vehicle should carry.
With TIM INSPECT, the check runs in four steps on AXION, the wearable computer on the operator's hand:
Typical cases the check catches are a weight label that belongs to another vehicle (the chassis number on it differs), a missing towing label, or a tyre pressure value that does not match the record. In each case the operator hears what is wrong, the correct label is applied and scanned again, and only then does the vehicle continue.
Because AXION is worn on the operator's hand, it sees each label up close and at the right angle, including the ones behind a door or under the hood. The image is analysed on the device, so reading does not wait for a round trip to a server, and the operator carries nothing else. If the connection drops, the device keeps working offline and uploads its records when the connection returns.
On an automotive manufacturer's production line, the vehicle label check has run more than 1.5 million operations with 100% accuracy. All five label checks together take 6 seconds, including system communication and image processing. These figures come from the Thread In Motion project report for that deployment.
If your labels are on parts rather than on the finished vehicle, the same idea applies further upstream; see Metal Part & Label Verification. Vehicle label checks are one of 35 applications on the TIM INSPECT platform, which share the same image processing, alerting and record-keeping.
No. The text and values printed on the label are read with OCR and compared with the expected value for that vehicle. Each label goes through detection, character reading and comparison with the MES record.
In the deployment described above, five labels are checked on every vehicle: chassis number, weight, towing, tyre pressure and refrigerant. The list for your line is defined during the pilot.
The line stops and everyone involved is notified. The vehicle stays at the station, the photo and the value read stay on record, and the vehicle continues once the correct label is scanned.
The labels sit at five different points and some are hidden until a door or the hood is opened. A camera on the operator's hand reaches all of them at the right angle.
No. The device can work offline and uploads its records when the connection returns.
If you want to see how this would work with your own labels and MES, you can request a demo and we will look at a pilot scope for your line together.