Restricted zone intrusion detection means noticing the moment a person enters a hazardous area, such as a robot cell, a press zone or the space under a suspended load, and warning that person straight away. With vision AI, the hazardous zone is drawn on a fixed camera view, the system detects anyone who steps in, and the alert goes to the worker's own wearable device rather than to a siren. TIM INSPECT Restricted-Zone Detection adds this alerting and recording layer alongside your existing guarding.
On many sites, the boundary of a hazardous area is a painted line, a strip of barrier tape or a sign. Those markings tell people where not to go, but they cannot react when someone crosses them, whether out of habit, to save a few steps or simply without noticing. Some zones are not even fixed: the area under a crane load moves with the load, so yesterday's safe walkway can be today's danger zone.
There is a second gap. A breach that nobody sees is never recorded. Safety teams know that people step into these zones, but without records they cannot tell where it happens most, at what time or why. Regulators such as the UK's Health and Safety Executive treat the control of access to dangerous parts of work equipment and machinery as a core duty, and that starts with knowing what actually happens on the floor.
With TIM INSPECT, the workflow has four steps:
The space under a suspended load is a good example of why drawn zones need to be flexible. Here the zone is updated according to crane and load movement, so the hazardous area travels with the load. Coverage is planned around the camera views available on site.
The system does not stop machines on its own; it alerts and records. Where required, a signal can be sent to the PLC to slow or stop a machine. Because this touches the plant's safety function, that link is always designed together with the existing safety circuit. A camera on its own is not a safety barrier.
Where the main risk is moving vehicles rather than fixed hazards, see Forklift–Pedestrian Safety. Both run on the TIM INSPECT platform. For the full workflow and interactive examples, visit the restricted-zone detection page.
No. It works as an alerting and recording layer alongside physical guarding and the safety circuit.
Not by itself. Where required, a signal can be sent to the PLC to slow or stop the machine, designed together with the plant's safety circuit.
Authorised entries are defined at the start, so planned maintenance is kept apart from breach alerts.
The zone is updated with crane and load movement, so it moves along with the load within the available camera views.
No. Zones and behaviour are monitored, not identity, and only the event moment is stored.
If you want to review your robot cells, press and crane areas with us, request a demo and we can define the first zones for a pilot.