Forklift–pedestrian collisions happen where people and trucks share the same space and cannot see each other in time: rack corners, doorways and crossings. Preventing them takes physical separation and clear rules first, and then a way to spot a risky encounter as it develops and warn only the two people involved. TIM INSPECT Forklift–Pedestrian Safety does this with fixed cameras that track both movements and a wearable alert on the pedestrian and the operator.
In most warehouses and plants, forklifts and people work in the same aisles. A loaded truck, a high rack and a blind corner are enough for neither side to see the other until it is too late. Workplace transport is one of the risk areas safety regulators keep returning to; the UK's Health and Safety Executive, for example, publishes detailed workplace transport guidance built around separating vehicles and pedestrians.
The harder problem is what you do not see. A near miss at a rack corner usually leaves no trace. Nobody reports it, nothing is recorded, and the site only learns that the corner is dangerous after an accident. Without data on where close encounters happen, layout and routing decisions rely on instinct.
The camera-based approach looks at the situation, not just the distance. It runs in four steps:
Take a typical rack corner. A forklift and a pedestrian approach from two sides, and neither can see the other. The cameras follow both movements and their likely intersection. When the site's threshold is reached, both AXION devices alert, both people stop, and a short video of the event is recorded for review.
The value does not end with the alert. Every recorded near miss becomes something the safety team can review: where it happened, how the two paths met and why the alert fired. Over weeks, the heat map shows which corners, doors and crossings carry the most risk, so decisions about routes, crossings and layout can rest on recorded evidence rather than impressions. This is the main outcome to measure in a pilot, alongside relevant event detection.
Many sites also have hazardous areas that nobody should enter at all; for those, see Restricted-Zone Detection. Both run on the TIM INSPECT platform, so cameras, alerts and event records stay in one place. Full details of the solution are on the forklift–pedestrian safety page.
During a defined risky encounter, the AXION devices of the pedestrian and forklift operator involved receive vibration, sound and an on-screen notification.
Possibly. Angles, coverage, image quality and connection conditions are checked during the site assessment, and the required camera setup is defined from there.
No. Alert thresholds and monitored zones are configured for your workflow, and the pilot works on reducing unnecessary alerts.
Near-miss records, short event videos and a heat map of risk locations. Filtering, access and retention rules are agreed in the project.
If you want to map the crossings and corners that worry you most, request a demo and we can define a pilot scope for your routes together.