Pre-shipment carton verification is the last chance to stop a wrong product, a product of the wrong size or a carton with a part missing before it reaches the customer. The most dependable approach combines hand-held checks for plugs and labels, a laser measurement for product height and a camera that watches the carton for the whole time it is being filled, not just in one photo. TIM INSPECT Product & Carton Verification brings these checks together at a single packing station.
Packing looks simple: finished products go into the customer's carton and the carton ships. In practice, three errors keep reappearing at this stage. A product of the wrong height is packed with the others. The wrong product, or a product meant for another customer, ends up in the carton. Or the carton leaves with one part missing, a plug left out or a layer pad forgotten.
Each of these turns into a complaint at the customer's receiving dock, and in automotive supply chains a complaint often triggers sorting, extra checks and a closer look at every following delivery. The packing station is where these errors are cheapest to catch, provided the check cannot be bypassed.
The solution assigns each check to the technology that suits it best and runs them in one workflow. Which customer the product belongs to, and the expected values, come from MES.
Imagine a product on the table whose label code does not match the customer and product information from MES. The glove sees the difference and vibrates, the VEGA-X screen shows "Label mismatch", and the operator sets the product aside and brings the right one. The wrong product never enters the carton, and the error is reported to the system at the same moment.
Watching the carton for the whole time it is filled is what makes the verification hard to bypass. The system knows everything that happened, not one moment. A carton that leaves the area before the part count or the plug check is complete is flagged as not OK. For every carton, a video record and event history are kept: which part went in when, which one was taken out, and in what state the carton was closed.
At an automotive supplier, product and carton verification reached 99% height measurement accuracy, made the process 50% faster and achieved 100% customer satisfaction. The repeat check at the next station was no longer needed. These results relate to that deployment and are based on the Thread In Motion project report.
If your shipments go out in crates or returnable containers rather than cartons, see Shipment & Crate Verification. Both are part of the TIM INSPECT platform, which writes results back to systems such as SAP, MES or WMS.
A product can be placed, photographed and removed again, so a photo proves only one moment. Continuous video follows the whole filling process and records it.
Plugs and label are checked with VEGA-X, height with the smart laser, and carton contents with continuous video from the fixed camera. The shipping label is confirmed with a barcode scan and vision.
The glove vibrates, both for hand checks and for errors found by the video analysis, and the error is reported to the system at the same time.
It tells the station which customer the product belongs to and which values to expect, and it allows the customer's shipping label to be printed once every check passes.
If you want to bring your pre-shipment checks to one station, request a demo and we can review your product, carton layout and MES connection together.