Lone worker fall detection is about one thing: making sure a person who falls or stops moving while working alone gets help in the first minutes, not at the end of the shift. With vision AI, fixed cameras detect a fall, a person lying on the floor or unusually long inactivity; the person's own wearable first asks "Are you OK?", and only if there is no answer does a help call with the location go to the nearest colleagues. You can see the full flow on the Fallen or Motionless Person Detection page.
Night shifts, the back of a large warehouse, plant rooms and maintenance areas all have one thing in common: people are often on their own there. If something goes wrong, nobody is close enough to see it.
When someone slips, faints or is struck by an object in a busy area, colleagues react within seconds. In a quiet aisle at 3 a.m., the same event can go unseen until a supervisor wonders why a task has not been confirmed or a radio call goes unanswered. Yet the first minutes after a fall are decisive for help.
Regulators recognise this. The UK Health and Safety Executive's guidance on protecting lone workers asks employers to assess the risks of working without close supervision and to have a way of keeping in touch and responding to emergencies. The question for most sites is not whether they need such a system but how to make it work without constant check-in calls.
The common gap is that either the person has to act, or someone else has to be watching. Vision AI closes that gap by letting the existing cameras watch for the event itself.
On the TIM INSPECT platform, fallen person detection follows a "detect, ask, call" logic designed to avoid unnecessary alarms:
The confirmation step is what makes the system practical. Breaks and floor-level maintenance work can look like inactivity on camera; asking the person first sorts these out before anyone is disturbed. When the call does go out, it tells the responders exactly where to go.
Each event leaves one record: where and when it was detected, whether the person confirmed, who the call reached and how long help took to arrive. Looking at response times by area helps you review how lone working is organised, for example which zones are too far from the nearest colleague at night.
Start with places where people really are alone: night-shift zones, the back of the warehouse, plant rooms and maintenance areas. The scope is planned around camera views on site and how workers use AXION on those shifts.
The camera must see the floor of the working area, including the ends of aisles and the space behind equipment. Blind spots behind racking or machines are where a fallen person is hardest to see, so they deserve attention during the site walk.
The help call is only as good as the chain behind it. Agree who is first, who is second, what happens if the nearest colleague is also busy and how the person in charge closes the event. These rules are configured around your existing emergency procedure rather than replacing it.
Workers will ask whether they are being watched all the time. The answer should be clear: the system monitors areas and behaviour, not who a person is; images are filtered and only the event moment is stored; no health data is kept. Privacy is designed in from the start in line with GDPR and KVKK. Explaining this openly, together with worker representatives, makes adoption much easier.
If your lone-working areas also include ladders, platforms or mezzanines, it is worth looking at Working-at-Height Safety at the same time, since many serious falls start there.
It can look like a fall or inactivity on camera. That is why the person's own AXION asks first; if they are fine, they confirm and no help call is sent.
A help call with the location goes to the AXION devices of the nearest workers and the person in charge, following your site's emergency call chain.
No. Only the event record is stored, containing the event footage and the response time.
Wherever people work alone: night shifts, the back of the warehouse and maintenance areas come first.
To review your lone-working areas, shift patterns and call chain with our team, request a demo; the solution page shows each step of the workflow in more detail.