An ergonomic risk assessment usually happens once a year, when a specialist watches a station for a short time and fills in a form. Vision AI makes it a daily measurement: station cameras derive body posture and joint angles, score lifting, bending and reaching against a risk scale, and a worker's wearable gently reminds them of the right technique when a movement is risky. The Ergonomics & Posture Analysis solution page shows how the scores turn into station-level reports.
This article looks at why posture risk is so hard to manage with periodic observations, how camera-based posture analysis works and what to agree on before you introduce it on the floor.
Musculoskeletal complaints are a major source of lost working days. The European Agency for Safety and Health at Work describes work-related musculoskeletal disorders as one of the most common work-related health problems in Europe, affecting the back, neck, shoulders and limbs, and notes that they usually develop over time through a combination of risk factors.
That last point is the problem. A bent-back lift done hundreds of times a shift does more harm than any single movement, but a short observation cannot count repetitions or see how posture changes as people get tired. On many sites nobody actually measures which station carries the risk; decisions about layout are made on impressions.
What is missing is continuous, objective data by station and task, collected without disturbing the work.
On the TIM INSPECT platform, ergonomics and posture analysis uses fixed cameras at the station and follows four steps:
The movements in scope include lifting with a bent back, working above shoulder level and twisting while lifting. Body posture, joint angles and repetition count are assessed together, which is exactly what a short observation cannot do.
The reminder helps build a habit in the moment, but the bigger value is in the report. When you can see which movement was found risky, at which station, in which task and how often, you can change the station itself: raise a pallet so nobody lifts from the floor, move a frequently used part below shoulder height or turn a workstation to remove a twist. Decisions rest on measurements collected every day rather than on one observation per year. If you are also analysing station cycles, Cycle Time & Microstops uses the same camera view to show where the workflow loses time.
Ergonomics only works if workers see it as support. The solution is introduced together with worker representatives, and the stations to observe, the reminder frequency and how the report will be used are agreed at the start.
Individual scores should not be used for performance reviews. Reports are kept by station and task; the aim is to see which station carries the risk and to improve its layout. Stating this in writing before the pilot avoids misunderstandings.
Joint angles can only be assessed if the camera sees the body clearly from a suitable angle. Racking, conveyors or the load itself can hide part of the movement, so camera views are checked station by station and the scope is set accordingly.
The system observes posture and movement, not identity. Images are filtered and only the event moment is kept, and privacy is built into the setup in line with GDPR and KVKK.
Too many alerts and people stop listening; too few and nothing changes. Start with a moderate setting, review it with the team after the first weeks and adjust. The aim is habit, not punishment.
They should not be. Reports are kept by station and task so that the risky station, not the person, is improved.
Lifting with a bent back, working above shoulder level and twisting while lifting, together with joint angles and repetition count. The exact scope depends on the camera view at each station.
No. The reminder frequency is adjustable, and AXION only vibrates gently on a risky movement.
No. It assesses posture and movement, not identity, and keeps only the event moment.
To choose the stations, movements and camera views for a first pilot, request a demo and we will plan the metrics together; the solution page walks through each step.