Automotive
Ford
TIM INSPECT and VEGA-X digitized quality control: operators captured data hands-free while TIM INSPECT validated each step in real time.
- 100%Traceability
- 50%Speed
- 0%Errors
TIM INSPECT · Automotive & manufacturing
Stop the wrong, missing or unseated part at the station, not at end-of-line.
Assembly error-proofing with vision AI checks each part and step as it is assembled, so a wrong, missing or unseated part is stopped at the station instead of being found later. TIM INSPECT captures the image with a fixed camera, AXION or the VEGA-X glove, decides in seconds, alerts the operator and writes the result to MES, SAP or PLC.
The problem
Visual inspection depends on the person and the shift and leaves no evidence. Paper checklists record that a step was signed, not that it was done. Fixed cameras help, but they look from one angle and cannot see the part in the operator's hand or the connector behind a bracket.
Results vary by operator and shift, and visual checks cannot keep pace with line speed.
A fixed camera misses in-hand parts, hidden fasteners and hard-to-reach connections.
When a complaint arrives, there is no photo showing how that unit was built.
The solution
TIM INSPECT is an operational vision AI platform. Most vision products stop at detection; TIM INSPECT also alerts the right person, stops the process when needed and writes the result to your systems. It runs on your own cameras or on AXION and VEGA-X.
Labels, numbers stamped in metal and part numbers, matched against production data.
Parts without a barcode, identified by their appearance.
Is the part in place and fully seated; is anything missing or damaged.
Missed or out-of-order assembly steps are flagged as they happen.
Vibration, sound and light to the operator; a stop signal to the PLC.
Every operation saved with an evidence photo, ready for audits.
How it works
Every TIM INSPECT solution runs the same four-step loop.
A fixed camera, AXION or the VEGA-X glove captures the part, label or step.
TIM's own models compare it with the expected value from MES or SAP in seconds.
The operator gets OK or NOK by vibration, sound, light or screen; the PLC can stop the line.
The result and evidence photo are written to your systems, and the record stays open until the error is fixed.
Field results
Figures from the project reports of TIM INSPECT field applications.
12.8 million+ inspections with VEGA-X and zero defective parts reaching the customer.
Operation time cut from 8 to 4 seconds, with zero errors.
Process time from 8 to 4 seconds and 100% traceability on fully seated connectors.
The defined order is monitored and skipped or wrong steps are flagged immediately.
Customer proof
Published stories from automotive production and Tier-1 suppliers.
Automotive
TIM INSPECT and VEGA-X digitized quality control: operators captured data hands-free while TIM INSPECT validated each step in real time.
Tier-1 supplier
Operators captured images from any angle with VEGA-X; AI models returned instant pass or fail across complex drivetrain parts.
Automotive
AI image analysis with VEGA-X reached hard-to-reach areas and verified each component across all surfaces.
With TIM wearables on the line, Renault and Stellantis cut assembly verification from 8 to 4 seconds.
Video
Stellantis and TIM on a high-volume automotive line.
FAQ
Error-proofing, or poka-yoke, prevents assembly mistakes from moving downstream. With vision AI, each part, label or step is checked by image at the station and a wrong or missing part is stopped before the unit moves on.
A fixed camera looks from one angle and cannot see the part in the operator's hand. TIM INSPECT adds wearables such as AXION and VEGA-X, and it does not stop at detection: it alerts the operator, can stop the process and writes the result to your systems.
Yes. TIM INSPECT is a software platform and works with your current cameras. AXION, VEGA-X and laser measurement are optional, depending on the check.
MES, SAP and other ERPs, WMS and PLCs. It takes the expected value from the system and writes the result and evidence photo back.
On AXION a check takes about 1.5 seconds per operation. With the VEGA-X glove, TIM INSPECT decides in under 4 seconds end to end.
In four steps: discovery, models and integration, a field trial with three metrics defined up front, then rollout and training. We need sample parts and images, system access and a process owner.
Keep exploring
Tell us which assembly error costs you most. We will decide together which solution, device and system connection fits.